Cold Press Veneer Glue, 32 Oz. – Economical Contact Cement Alternative, Bonds Wood, MDF, Plywood & Particleboard, No Harmful Vapors, Prevents Bleed-Through – 5175

Just follow the YouTube recommendations & this product does a great job.

Still is the best veneer glue, but you must shake it thoroughly. I shake for at least one minute prior to application and use a cold vacuum press for three hours to ensure proper adhesion, as I've had bubble in my veneer when only pressed for one hour.

Excellent glue for veneer. I used it with a board and clamps. Works great but does need significant dry time. Overnight worked best. Careful not to roll too much glue as it can harden into a solid ripple or bump.

I have previously used Unibond C800, which does a nice job but dries rock hard and can leave a dangerously sharp glue line. Thought I'd try this, and I am very pleased with the results. High points: - minimal bleed through, and what little there was disappeared with the scraper - reasonable open time so I can glue up a couple of projects for pressing at the same time - easy to apply - not too thick or runny. I used foam brush Be aware of: - I read somewhere that 1-2 hours in press at 70deg F recommended, but found glue still wet and first project I removed at that time was not set and created a ridge in veneer - since leave in press more like 6 hours and nicely set and no movement ... this in PA summer temps 80+ and humid - nice result and no sharp edges to cut me. In summary I am buying more and will continue to use. Nice not to have to mix 2-part glue, and great results so far after 4 projects through press. I think the other reviews that complain of wet glue did not leave in press long enough. I strongly suggest 6!hours at 70+

I have always hated using contact cement. S.elly and unforgiving. This has hardly any order and goes on easily and evenly. Cleans up easily and gives time to properly align materials. Holds great.

Cold press veneer glue works well with all types of veneer. It gives you plenty of working time to apply to the substrate place the veneer and put in a vacuum press. It is advisable to mix the glue throughly to make sure solids are evenly distributed in the glue to minimize bleed through.

Used a few times and it has been perfect for my project applications.

It really is think and isn't any better than wood glue.

This is a high quality glue and perfect for its intended purpose .

colla a freddo specifica per impiallacciatura. Adatta per superfici piane dove è possibile applicare la dovuta compressione. Per le superfici curve mi trovo meglio con il metodo di AT, Athi Toplaan, che usa colla vinilica lasciata asciugare e ferro da stiro. Consistenza fluida e tempo di posizionamento giusto la rendono superiore ad altre per facilità d'uso a pennello. Le sbavature ancora fresche si rimuovono con un panno umido, i residui secchi sono più problematici. Una volta eliminati i residui di colla la superficie si presta discretamente alla carteggiatura abrasiva e alla successiva colorazione. Sull'impiallacciatura uso solo gommalacca e il risultato è piacevole. Consigliata

good product and price just the job

It is a professional product. The darkish colour does’t help if the glue penetrates the wood fibers. It has a good open time. WAIT a few minutes so the glue can dry a bit, it will be a bit less fluid before pressing.

Found it locally after for a1/3 of the price The glue is very good but only 2 stars because of the price