Aluminum Heavy Duty Lazy Susan Rotating Turntable Bearing Swivel Plate Hardware for Dining-Table (8 inch)

Was a very smooth, very slim base for a lazy susan. The only downside is the spacers ( which came pre-installed) appeared older, and very hard, so didn't provide much cushioning. Overall, though, a very nice purchase, which I am hoping to repeat for a smaller size.

These are definitely heavy duty, as they claim. I had bought two previously, one 6" and one 8", they both work great. I had read some reviews before buying them previously, that said they didn't turn well once tightened down to the board, but if you put some washers against the board under the turntable, those will raise it enough that the turntable can turn without pinching against the wood.

The construction of this lazy susan is okay, but out-of-the-box the lazy susan does not spin smoothly. This is because the bearings do not come greased. Spraying some silicone lubricant on the bearings made a world of difference. Now the lazy susan spins without noticeable friction. I used the port on the lazy susan to spray in grease, but you can easily just spray around the gap between the inner and outer ring. I'd suggest the latter, as the port on mine had a cross-threaded set-screw that was very difficult to unscrew; I think the port might have been for loading the bearings. Even with the lubricant, the bearings often make "chattering" noises. There are occasional times where the bearings seem to "catch" while spinning, but it happens mostly when the load is unbalanced and in only one orientation. For the price it's not a huge issue. I appreciate that the bearings are more protected in this type of lazy susan, and not held in place with some bent-over sheet metal.

I screwed this lazy Susan to the bottom of a fishing rod holder. The rod holder is round and sat in a corner. It didn’t spin which made it hard to get the rods out. I had to buy some 1” screws to go into the rod holder. In my video the reel handles are hitting the outlet but it does spin all the way around. Very quiet. Smooth operation.

Works great! Sturdy and stable.

Fast delivery. Well Machined and spins very smooth.

I purchase a lot of bearings and this bearing really beat my expectations. Now, this is an economy bearing and not a high performance bearing, so you have to hold your expectations correctly. Yes, the bearing is a little noisy--primarily due to the balls not covering 100% of the track. If you want something quiet, Timken makes great bearings this size for 10x more money. Breakdown of the cost of goods: approximate weight (14" model): 4 lbs value of aluminum: $2 per pound = $8 raw materials so, you can buy this for 3x the cost of the raw materials, that's impressive in my book. Lubrication: I lubed a couple with Teflon (PTFE) lubricant to see if it would help and it promptly bound up the bearing. Conclusion: the factory lubricant is pretty good. Conclusion: I am very impressed with this bearing as an economy bearing. I will continue to buy these in quantity for low speed, intermittent use applications (like a lazy Susan). I would not use this in a rotating shelf display

Since my 20 year old microwave died, I salvaged the glass turntable for a lazy suzan for my kitchen. The swivel plate has some drag and isn't totally free spinning. It's probably better that was so items don't fly off if spun too fast. Once I got all the items on the lazy suzan it spun easier.

Excelente acabado y rodamiento

Die Produktqualität ist minderwertig. Der Ring dreht sich schwer und knirscht beim Drehen.

Its just what I was looking for and works great.

Very robust, works well.

This works great and slides smoothly. Very pleased.