Performance Tool W80626 One Person Brake Bleeder Kit with 3 Adapters, Easily Remove Air from Brake Lines, 12in. Hose Length, 8oz. Cup Capacity

I got this to replace a 40 year-old Mity Vac that couldn't be taken apart and serviced. This one works great, pulls a good vacuum and holds it. It's even easy to take apart and clean, which I had to do because I accidentally connected it to the wrong fitting and sucked a bunch of brake fluid into it. Doh! But no worries. A few screws and it was apart, all cleaned up, relubed with silicone and is ready to go again.

Works well. No issues

worked for honda civic and accord 2014-2019

Muy bueno y te ahorra mucho trabajo

The pin holding the trigger mechanism to the piston that operate the pump is garbage. It broke the first time I used it -- pin slid out of the groove that held it in place, and was impossible to reset with any reasonable amount of effort. On inspection it's obvious this is a badly designed unit with an obvious weak spot at a crucial location.I would have returned it, but the return window was closed by the time I got around to doing the job I'd bought it for.I eventually managed to use a vice grip to lock onto the piston and manually push and pull to pull the relatively small vacuum pressure needed for the job....oakie powers in effect...but this unit is garbage.

I needed to check the distributor vacuum advance for my 1959 Nash before I assembled and re-installed the distributor. I have several old spare parts and wanted to try to find one that would work. All 4 pulled in with vacuum but also leaked out in a few seconds. It didn't make sense that they were all failing at exactly the same rate so I checked the vacuum pump without a hose or connector. It showed the same leak down rate. It turns out that there are two O rings on the stem of the vacuum gauge but there are too small a cross section diameter to seal up reliably. I put in a couple .010" cross section diameter O rings with a little silicone grease to seat them. The pump is working fine for now and does not leak down. This probably would not matter if you just need to bleed brakes. If you use it to test vacuum as the description says you can, that slight leak makes diagnostics impossible. After fixing the pump I found 2 of the 4 vacuum advances are working fine. One is scrap and one has a very slight leak. In general I do not like to repair or re-engineer things I buy new but this was a quick and easy fix that enabled me to get my car back together this weekend.

This items worked great. It allowed me to bleed my brakes just as described. I felt very comfortable using this product.

I was trying to bleed my brakes I got confused how to use it because it came with a bleeding screw in it when I removed my bleeding screw the fitting didn't fit this was my first time doing it

Funciona bastante bien , para cambio de líquido i frenos

Tal como, se describió el artículo, ha llegado , en tiempo y forma, pueden confiar 100 de 100 de este vendedor, muy satisfecho con la compra.

Cheap company...The packaging had already been opened. As if this was not enough, a part is missing ie the special washer for the connection on the caliper bleeder nipple.

super

Excellent for bleeding brakes. The connectors fit my bleeders perfectly and the job went smoothly. Very happy.