Gold HTV Heat Transfer Vinyl 12Inch x 5Feet Roll, PU Iron on Vinyl for Silhouette Cameo, Easy to Cut & Weed HTV Vinyl, Heat Transfer Vinyl for T-Shirts (Gold)

The media could not be loaded.  I make t-shirts and use HTV a lot. I usually buy Siser easy weed HTV but this vinyl is sooooo much better! and not to mention you get 12 in X 13 ft YES 13 FEET for only $17I used my Cricut Explore Air 2 to cut this HTV and it cut fine. I weeded the vinyl and it was no hassle at all. I adhered the HTV to my shirt and used my Cricut Easy Press 1 and it did a beautiful job!This vinyl is WARM peel off.I definitely recommend this vinyl!!!

Pros:*includes a sheet that gives you directions on how to use and what temps and how long.*the roll has this adhesive to it.. so when you cut it, it still stays in roll form. Which is great for storing!*HUGE roll. Very inexpensive.Cons:*it’s hard to tell if it actually adhered to the object because it’s thick. I noticed when I angled it towards the light, it had tiny circles on it. I’m not sure if that means it adhered or not.I wanted to give a few notes. The clear part is really really thick and strong. Which means weeding took me a little bit longer to do because I had to really pull it. The roll looks orange red when you receive it but it transferred red. I’m assuming it looks this way because of the thick and clear backing. I also applied heat longer than the directions. I used a transfer craft 15” by 15” clamshell heat press. Set at 320 and pressed in intervals of 20 seconds. I used a tea towel over it as I pressed. Cut beautifully with my explorer air 2. I set it on vinyl + because on mine, if I do iron on it cuts all the way through the clear sheet. Overall, I will buy again. It’ll take some getting used to because it takes more effort to weed it, but you cannot beat the price. I’ll get used to having to put more elbow grease in 😏

I received my Eygoo Heat Transfer Craft Vinyl, I can't believe the amount of HTV that you get. I make designs for TShirts and this vinyl is very easy to use. I totally recommend Eygoo vinyl for your iron on projects. I would definately purchase this product again!! ☺

I have purchased many different brands of iron on Vinyl and I really liked this brand. The color is metallic which other brands that I have purchased were more of a dull gold. The product was easy to weed.One trick I discovered, the material tended to bubble and stick to the plastic backing. First you heat the decal for 10 seconds, then heat for 15 seconds with parchment paper in between the decal and the iron. I found that If you apply pressure with your iron at the end of this process, the vinyl will release from the plastic and smooth out the bubbles.I would definitely do a practice run first to figure out what works.Overall, it’s worth the money!I was able to make 425 graduation masks for my seniors with two rolls of this Vinyl.

The media could not be loaded.  I've bought a lot of HTV and this is by far the best HTV I've worked with! Weeds very easy, my first project with this vinyl was a baby onesie, my design was 4x3.5, small and yet still cut beautifully! The carrier sheet is not sticky like most HTV However i found that useful! I was able to weed my pieces, put them to the side and not worry about it getting full of lent or any thing else sticking to it until I was ready to press. I did a warm peel and had no issues at all. What I really love is how it adhered to the fabric, it's not thick or bulky and hard where you can feel it.

I LOVE this product!!! It truly is easy cut and weed! I even need a new blade in my Cricut and it cut with no problem! It irons on beautifully! It actually looks like it is part of the fabric there is no seam like you get with some heat transfers. I set my press on 320 left on for 15 seconds then flipped shirt over ironed that side and that’s it. It truly is the best Heat transfer vinyl I have used yet. The colors are really beautiful. JUST BUY IT!! You won’t be disappointed.

The media could not be loaded.  I’ve been looking for an easy to weed vinyl with some color and this is perfect! Love the blue and purple depending on how the light hits it. It cut very well. There is a thin blue backing on the side up (black) to cut that you should remove BEFORE cutting. If not removed it definitely will not cut the project right just by how it feels.I used the vinyl on 2 different type of surfaces, an under armour backpack that we use for my dog’s stuff when going somewhere and a t-shirt. It was a little tougher to stick on the backpack first try, but it was definitely my error for not stuffing the pocket to stick out better so it didn’t lay very flat. It stayed well though to the type of material. The shirt on the other hand worked absolutely perfect first try at 300 degrees with a warm peel!

While I am new to making shirts with my Cricut, I made some shirts for my son for his birthday using a different brand of vinyl. I had to make a couple more shirts and had to buy more vinyl, which is this brand. There was a difference when it came to weeding, using the Easy Press, and removing the clear film from the shirt. This brand was extremely easy to weed while the other brand I used (can't remember the name of it) made me work a bit to weed out the bits and pieces that were necessary. When I followed the directions for this vinyl, it was actually accurate. I didn't have to put the heat on it again for a few more second. Then, removing the clear film from the vinyl and shirt was super easy. Therefore, a novice to making shirts was able to make a shirt without any complications. I am sure an expert could layer and do more with this vinyl. I definitely would order this brand again, especially since you get more feet for the price of a typical HTV roll.

Excellent vinyle très facile a épiler. l'impression est aussi sublime et brillante.Mais la quantité est minime, 5$ le pieds ca reviens cher c'est pas un bon deal.Aimerais mieux 8 pieds ou 12 pieds même si le prix est un peu plus, la pour le prix je trouve très cher, malgré que le vinyle est tout de même très beau.

The worst HTV I've ever bought. Weeding is so difficult. Then after using the heat press the htv lifts while pulling off the clear film. I've even waited until it was fully cool and it still lofts and I have to lightly go over it again with heat. Would not buy again

This vinyl is EXTREMELY hard to work with. It takes an excessive amount of time to weed because it is always ripping and it is so hard to pull off (you hands start to shake with the force and pressure you have to use). When you peel it off of the shirt it remains stuck (plastic transfer and all) and a part starts to lift it will ruin the whole design. The vinyl looks great once it’s on but you waste so much time trying to get there it doesn’t even seem worth it.

SO hard to weed. I pretty much ripped the design free. Thank goodness it was square letters or I wouldn't have been able to weed at all. If I hadn't used most of it, I would have returned it. Would never buy again.

I will never buy this vinyl again. I am so disappointed, unfortunately I bought it to do some Christmas crafts, but never needed it until now, so it is too late to return. It is so hard to weed, I pressed it for the recommended amount of time, with a heat press, and it didn't adhere to the fabric, so i doubled the time, it was still lifting. Hard to weed, doesn't stick - the 2 most important things of HTV, and it fails on both.