CAREGYIron on Heat Transfer Vinyl Roll HTV (12''x5',Light Orange)

I read the reviews before purchasing. I figured the negative ones were most likely user error, and I might need to experiment before making my shirt.Please note that this review is for the purple/green iron-on vinyl. I have no idea if the other options are the same product just different colors.I selected the Chalkboard Vinyl setting to cut with my Circuit Explore Air. It was perfect. Clear, clean cuts. Weeding was a breeze.I was also grateful that the clear backing is still adhesive after weeding. While I had no issues with this cut, I have had images in the past with small pieces that pulled up while weeding. The adhesive backing will allow those tiny pieces to be put back in place before ironing.I do not have a fancy iron press. I simply used the Cotton setting on my iron. Placing the T-shirt on a wooden cutting board, I ran the iron lightly over the whole image. Then I went back and applied steady pressure for 3 seconds in each area until I had gone over the whole image. I repeated this process and finished with another once-over, thinking I might have to do another round. I allowed it to cool for about a minute and then gently started to peel. There were areas that needed a little more attention, but it all peeled fine. I will update when I've washed it a couple of times.I love this purple/green iron-on vinyl! And with 5 whole feet, I know I'll be using it for other projects! My teenage daughter has called dibs and is searching for a graphic idea for the next tshirt!

Good quality HTV. This brand of HTV weeds well. I had no rips or tears. Applied nice and even. Will definitely be purchasing more! Thickness is perfect for Maker. No bubbles. Adhesive seems to be of good quality. No chemical smell . This premium HTV IS DEFINITELY WORTH BUYING!!!

I make our work shirts so this was prefect. Also I can do a lot of shirts with this easy to weed as well. Haven't washed shirts yet so don't know how it holds up.

Okay guys, so the first roll I ordered really must have been a bad batch. It was extremely hard to weed because it was so extra sticky. There was nothing I could do though because I had already printed designs for these charity shirts so I just hoped it was worth it. Once I got to weeding the second roll I had ordered, it was sooooo easy! So if you have trouble weeding, and you’re sure you’re machine was in the right setting during cutting, it’s probably just a random bad batch. Send it back.However, once you get a good batch, weeding is amazingly easy!Another problem I had was getting it to stick to the shirt. I have a new heat press and was following their directions perfectly. I was so disappointed it was peeling terribly! I watched a few YouTube videos and discovered how adjust the pressure on my heat press…BOOM! Once it had enough pressure, I put it at 305* for 15 seconds and it literally peeled like butter!!!! I may try the actual recommended settings of 302* for 10-12 seconds but I’m nervous to change anything since I’m getting such beautiful results!Bottom line, when you have a good batch and the right setting, it weeds and peels like butter. Never had a better vinyl in the end!

I needed 20+ ft of vinyl for a simple backdrop and was on a budget. I chose this one because of the quantity/price.Weeding: It wasn’t the easiest to weed because it kept ripping and wouldn’t pull off in 1 full piece but that didn’t affect my letters/cuts so I was okay with it. It was just kinda annoying.Carrier Sheet: Like many of the other reviews said, it was hard to pull off the carrier sheet once pressed. It’s very strong/thick vinyl so it required more strength. I had to get help to hold down my banner while I pulled the sheet off. And by the end, my arms were sore and I was exhausted.Pressing: I used a Cricut EasyPress 2 at 305 degrees for 15 seconds. I found myself having to do another press on most letters because there were some ends that didn’t fully stick so that was annoying/time consuming. I would also use my MiniPress for these touch-ups. I recommend waiting 45 seconds after pressing to peel because it was easier to pull off the carrier sheet and most of the design stuck. I don’t recommend a cold peel because that requires more strength to pull it off.Overall this is a very strong/thick vinyl that is good for bigger projects that have occasional use. The vinyl didn’t fully adhere to the fibers (probably because it’s so thick) so I wouldn’t recommend it for everyday wear clothes. It was good enough for my budget/project but I also spent a lot more time weeding/pressing/peeling than I normally do so if you value your time- don’t get this.

Weeds amazing. No problems using this. Color is spot on. Presses amazing

I love using this as it it very easy to peel. I love using it to all of my projects. The price is good compare to other brand. Highly recommended!

Got this vinyl because it had a few good reviews. The vinyl I received is of very poor quality. It is a pain to weed and even pressing with a heat press it doesn't adhere to well. I have used plenty of other brand vinyl and this is the worst stuff I have used. Will not buy again.

Great htv, easy to use

Very hard to see cuts to weed. Box was ripped open and edge was jagged, ? if it was a used return. As others have said did not receive weeding tool