Vapor Canister Purge Valve Solenoid compatible with GMC Acadia Terrain Chevy Impala Traverse Cadillac SRX Buick Enclave 12610560 55593172 911-082

This vapor canister purge valve solenoid worked exactly as it should. The fit was spot-on for my vehicle, and installation was quick and straightforward—plug and play with no modifications needed. After replacing the old valve, the check engine light cleared and the engine now runs smoothly again. The build quality feels solid, especially for the price, and it performs just as well as the OEM part at a fraction of the cost. This saved me a trip to the mechanic and a lot of money. If you’re dealing with EVAP-related issues or a stubborn check engine light, this is an excellent replacement. Highly recommend! ⭐⭐⭐⭐⭐

Fit perfectly for my 2012 Buick Enclave and was so easy to replace! Cheap and easy to replace and helped finally get my check engine light off after a while!

Great fit for 2015 Chevy Impala. Easy to install. Fix the problem.

Was getting the ol engine check light. Usually after fill ups and driving around (stop and go). Months past still no more check light since install. I believe this fixed the issue. Was fairly simple to install. Just a warning use the stock bolt and just past finger tight. Otherwise that bolt will break and you can just start your crying and swearing lol.

I thought that I would save a little money and purchase an aftermarket replacement purge valve for my GMC Acadia along with an aftermarket gas cap to see if it would stop throwing error codes and check engine lights. I installed it in less than 10 minutes and it work flawlessly….. for about 4 months. Then it would intermittently fail. I reset the code and thought that maybe it was a fluke. Nope, first it was every week, then every few days, and then it seemed like every time I got in the vehicle. I followed the troubleshooting steps by unplugging the power connector to the unit and felt with my finger feeling for vacuum, and sure enough I felt it sucking air in…. That is the way I would describe this product, it sucks! By the way, the aftermarket gas cap I bought had the keeper that attaches to the vehicle installed backwards so that every time you tightened the gas cap, it would wrap backwards against the filler tube. My suggestion, and I’ll let you be the judge, don’t cheap out and save money or waste your time. By original equipment parts and get it done right. I should have listened to my dad as I was growing up when he told me “ In the long run, it’s cheaper to buy a better product if you plan on using it for the long run.” Lesson learned!

The price can not be beat and it works just fine

This replacement purge valve works perfectly. Good price. The only trouble I ran through was the replacement bolt snapped in half so not strong metal. Maybe use the original bolt. Everything fits in perfectly.

So...Back in December, my family and I were traveling out of state. Our check engine light had come on and we, foolishly, took the vehicle to a dealership local to our destination for diagnostics and possible repair. In terms of symptoms, all we had noticed was that our car--a 2019 Chevy Traverse--was rough to start after any sort of fuel up. Subsequent ignition was fine, just anytime we were starting up at a gas station it would act like it didn't want to turn over. Well, it was Christmas Eve when we dropped it off and we couldn't return for it until 12/26. Upon arrival, we were told that we'd need to replace a catalytic converter and a number of other parts totaling just under $4k. Astonished, we got a simple oil change and left it at that. Later the same week, we had the sparkplugs replaced by another (much less expensive) mechanic. But, the rough start after fuel up issue persisted. As we should have done from the start, I Googled the symptoms which brought me around to this here purge valve. If you couldn't tell already, I am not a mechanic. I can do a few basic things, and I know my way around a number of different power tools, but cars are and always have been a weak spot in my technical education. Nonetheless, upon discovering that this little $12-$20 part might well fix our issue, AND it was something I could probably do myself? I don't think I've ever ordered any other item as fast as I clicked purchase on this. The part arrived within 48 hours of ordering, which was great. I wasted very little time in removing the cowling and intake valve to get at the old valve and put this one in, and you know what? It fixed the problem. Not only that, the check engine light turned off and has stayed off. If I'd gone with what the dealership had said, diagnostically, was wrong with my vehicle, I'd be $4k in the hole and my check engine light would still very likely be on. For the price, this can't be beat. I think I paid $12? O'Reilly's and Autozone want around $60 for this exact same part, so do yourself a favor and get it here. It works great, and even if it doesn't last very long, you can get 4-5 of them for the price of buying even one from a brick and mortar autoparts store. It's not the easiest part to replace, just because access is to tight behind the engine, but certainly not impossible even for complete amateurs like me. Build quality seemed the same as the stock part I removed, and fit was perfect. TL;DR Version: This $12 part that I could replace myself fixed a problem the Chevy dealership wanted $4k to fix. Cheaper by the dozen.

Répond parfaitement à mon attente Livraison et delais respecté

عمليه ارجاع بطيئه

This product has saved me time and money from having to go to a repair shop. I used it to clear a code on the vehicle and it worked.👍🏻

Product was easy to install and works like a charm. A lot more affordable than the name brand. Works great.

I installed this product on my 2011 GMC Acadia and it cleared the code but after 2 weeks it failed. It is a very cheap part and I'm disappointed with the results. It looks and fits perfectly but no performance at all. Thanks but no thanks. Wish I could get my money back.