1/4" Drill Bit for Plastic (Acrylics, Plexiglas, Lexan, ABS, PVC, and More) for Hand Held Drills

This drill bit works well in acrylic which other drill bits cause chipping

This is one of those tools an old uncle would tell you is rock solid and so useful. I had a major job to do using plastics requiring 140 drill holes. I started off using a few "general" drill bits and the going was horrible. It took about 40 seconds to drill the hole. Found this drill bit on Amazon and it hauls a$$. As it stands, it's the best tool in my toolbox. Bargain.

These are the best for drilling plastics and pvc I’ve ever used. I purchased these on the recommendation of the French Drain Man, I follow his videos on U Tube.

Worked great on the plexi glass led sign i built. Would buy again. Kinda expensive but i needed it and couldn't find the bits locally.

No chipping or cracking. These are excellent.

A much better option for drilling through plexiglass than a standard drill bit.

I used this to drill through 1/8" thick acrylic. It cut through easily and I had no problems at all. The cut was clean with no burrs on the edge and no melting. I did use a piece of plywood as a backing. Highly recommend.

I needed to drill mounting holes in three decently large acryllic sheets for a backsplash. I had initially purchased a generic drill bit rated for plastic from a big box hardware store. After practicing a few holes on some scraps with it, I realized that bit wasn’t going to work as it was leaving small cracks around the drilled hole, particularly on the exit side. So I ordered this bit. I was able to drill 16 perfect holes, 12 of which were 3/4” from both edges of the corners of all three sheets without any obvious cracks or splits. I did break the corner off another sheet unfortunately but I can’t say it wasn’t already damaged from the cutting process. Definitely worth getting a real acryllic bit given the cost of the acryllic sheets.