ET200 AC Line Splitter and GFCI Outlet/Receptacle Tester with 5 Visual Indicators

Have wanted / needed one of these for a long time. Very useful to determine the amp draw of a 120V appliance. Use with a clamp-style amprobe meter. The outlet tester works well, including the GFCI test function. Saves having to split the cord to get the info needed. Reasonably priced, made by a very reputable company. Great addition to my tool bag.

Functions as advertised. Allows you to check the power draw of a plugged in device using a standard volt meter.

Triplett, and Simpson are two hallowed names in electrical and electronic test equipment. I owned a Triplett V.O.M. back in the early 1960's, and Triplett was already a nearly 60 year old company at that time. The company was founded in 1904 by Charles E. Triplett. I still own, and occasionally use, a Simpson 260GP meter from that era, along with some Triplett panel meters that were made during World War II. Both companies products were always unusually well made and engineered. This line splitter carries on the tradition. It offers great value as well as it offers a GFCI tester along with checking receptacle wiring, for just a few dollars more than a plain no-name line splitter of questionable virtue. This one also has all the approvals and certifications.. The built-in outlet is in fact an actual discrete part, not simply prongs molded into the plastic case with wires soldered on as found in some of the no-name products I've seen. Subjectively, the Triplett ET200 feels really solid, and feels very comfortable when held in one's hand. It is a pleasure to use. A number of reviewers have commented that the 1X hole is too small. That may be, as this line splitter is marketed for use with Triplett products. However, I can confirm that it will at least fit the following non-Triplett models: Klein CL220 Amprobe RS-3 Ultra (The classic clamp-on ammeter!) Sperry Snap 6 (And other Sperry Snap series models) KAiWEETS KC604 TESMEN TCM300A Specifically, the hole measures: 28mm (1-7/64 in.) x 20mm (25/32 in.) Bottom line: If this will fit your clamp-on Ammeter, buy it without hesitation. If this will not fit your clamp-on Ammeter, but another clamp meter!

This device is pretty cool because it incorporates several different functionalities/features. I really like it because even w/o a clamp meter, I can use it to test for hot outlet and for GFI. Then you add the clamp meter, and it has both the 1x and 10x and I've tested both and they both are accurate. The only negative thing (but a tiny one) is that if you plug it into a wall outlet, the way the clamp clamps, you have to look at the clamp meter display "sideways". Very nice!!!

great product!

This works just fine, does the job. I was originally looking to build or buy a three light outlet tester, then I saw this and said I can get this and have another line splitter in the deal. It works just fine, does exactly what it's supposed to do. The thing that is puzzling to me is the reviews that say the 1X side is too small for their clamp meter. I had three clamp meters handy, an Amprobe, a Greenlee, and a Triplett. All of them fit and work just fine with this splitter. Thumbs up and a free 3 lamp tester (or free splitter, depending on how you look at it) is always handy to have when you need one.

I’ve always wanted one of these, but wasn’t sure how often I would use it. Finally had a small job that justified the purchase. It gave me just the info I needed and saved me time from having to remove a receptacle from them wall to clamp on the hot wire. Some tools are just for convenience; this is one.

super easy to use. You don't have put the wires into a plug , it's , very safe Good value for the money good quality easy to use

Great affordable tool to have in the electrical kit to help determine AC surge voltages that appliance and motor manufacturers NEVER mention but are vital to whether many off grid inverters can handle the appliance load such as for a vacuum cleaner, refrigerator, microwave oven, water pump and so on. No need to split the appliance AC wires (who does that anyway?) and guessing at the surge voltage or watts is not ideal, whereas this device with an appropriate clamp meter that measures AC Surges gives one accurate data. Cheap inverters (High Frequency / Low Cost) are notorious for giving vague specs and leave new off gridders scratching their heads wondering why does the inverter shut down or not even start when running an appliance? This device with an AC surge measuring clamp meter will measure the start up or surge load to provide data and call out the BS of inverter marketing and lies. HIGHLY Recommended.

Este divisor de línea CA/probador de receptáculos GFCI es un complemento útil para diagnóstico-corrección de fallas, así como mantenimiento de instalaciones eléctricas residenciales y comerciales (máx. 125 VCA). • Indica rápidamente la presencia de voltaje en un tomacorriente, así como también verifica su polaridad. • Permite medir la corriente y voltaje simultáneamente, que me permite calcular la potencia aparente de cualquier electrodoméstico. En las imágenes podrás observar una comparación de mediciones de corriente de un ventilador con dos instrumentos diferentes: un multímetro (UT61E+) con sensor de pinza de CA (UT-CS06A) y un medidor de pinza (UT219DS) para poder comparar la precisión y exactitud de ambos medidores. La primer imagen corresponde a la lectura X1 (lectura real de corriente) y la segunda a la lectura X10 (corriente multiplicada por 10 para aumentar precisión en cargas bajas), se observa como la pinza amperimétrica muestra datos más consistentes. En las imágenes posteriores mido simultáneamente la corriente y tensión para observar la caída de tensión por una carga inicial (en este caso, plancha de ropa), se observa como el voltaje inicial de 120.7 V baja hasta 112.8 V. El único inconveniente de este dispositivo es que, dado su aspecto (físico y al tacto), no parece ser adecuado para condiciones de uso rudo (polvo, caídas, humedad, altas y bajas temperaturas de operación), razón por la cual soy muy cauteloso con su uso. Aun así, recomiendo esta herramienta, facilita mucho el trabajo de un electricista, se ha vuelto parte fundamental de mi equipo básico de diagnóstico eléctrico.

Cool item to have way way more convenient than the cheater

Excelente dispositivo para medir la corriente de consumo en cualquier aparato electrico y electrónico, muy buena calidad, 👌🏻👌🏻👌🏻

Works great, good build quality - ensure that either you have enough space around the outlet to work with [as it sticks out a bit], or use an extension cable as a workaround.