Low-Profile TV Wall Mount 1" Slim Fixed Bracket for 32, 40, 42, 48, 49, 50, 51, 52, 55, 60 inch TVs VESA Compatible up to 600 x 400 Black

In an effort to free up space in our small living room, my wife and I decided to mount our 60" TV. We went with a flush mount, since it's the cleanest, sleekest look. I've mounted several TV's; most using fully articulating, and a few with flush or tilt mounts. My biggest frustration with prior flush and tilt mounts was the design of the wall plates. Every flush and tilt mount wall plate I've used in the past was two pieces that had to be bolted together. I'm still not entirely sure why most wall plates are designed this way. Maybe it's to make them more "shipping friendly", or maybe it has to do with weight distribution. Regardless, the two-piece design, in my experience, has a higher potential of a flawed end-result. The larger a TV is, the smaller the margin for error is. In the past, even when a wall plate was 100% level, I've experienced a crooked TV. The potential for an non-level wall plate grows when two pieces are attached to each other. I purchased this mount specifically because the wall plate is a single piece. I'm very glad I did. The end result is a perfectly level TV. Installation was a breeze. It took my wife and I less than a half hour to mount our TV. Excluding the 10 minutes it took to reliably find studs (we have thick walls), it was a 20 minute operation. One thing. Plan out your installation in advance of placing your TV on the mount. Make sure all your devices are connected BEFORE you place your TV on the wall. Get your cords tidy and in order BEFORE you place your TV on the wall. The back of the TV is functionally inaccessible when it's up on the wall. Also note that adding or removing devices will most likely require you to remove the TV from the mount.

Installation was easy. The built in level was accurate when compared to a different level. NOTE: This mount does not tilt as some others do. If you need to mount up high over a fireplace or something you may want to look at one that can tilt down a little to get rid of some glare from ceiling lights and to have it more "aimed" at your seating. However, this mount is perfect for mounting over a credenza (maybe around chest height).

I looked at a lot of mounts and almost pulled the trigger a few times on pricey options $75-150. I took a chance with this because of reviews that spoke highly of it. Having just bought an OLED TV I wanted something sleek, not one of those that juts off the wall or swivels. This is easy to install and once mounted, tv is easy to move left and right and if you need to raise or lower it it has several slants for that.

This metal wall mount was cheap but solidly built. I was impressed with the workmanship and it was perfect for my 55-inch LCD TV. I just needed to find the studs, drill a few holes and attach it with some 2.5 inch screws. Worked out great and my TV looks great on the wall!

Awesome! Holds my TV up just fine. Came with a lot of screws, so didn't have to run around to find the right screws. Was easy to attach and was able to install it myself. It had a leveler bubble thing too, which made it easy. all the holes there also helped to mark areas to drill. Would recommend. I bought a couple of these.

Used two of these wall mounts from Mount-It! and I'm very impressed with the build quality and value. Very sturdy and simple to use. Highly recommended!

The M8 bolts were both too small and too big to fix my Samsung UN55MU6290FXZASKU. $10 later I have to buy bolts for the 2 mounts I bought for 2 of these TVs. Seller please disclose this or fix your hardware--I can't imagine this isn't a standard size and length for Samsung TVs. After purchasing the right bolts the mount did install easily and without issue. It does fit flush, I'll give 3 stars for that.

Does exactly as advertised. Easy to install and has a slimline look.

Took a while to find a TV mount that was WIDE enough to handle an older family room TV that was NOT VESA standard. This one did the trick for us. Very solid and easy to install on studs. Did not want or need much in the way of adjustability - just needed a very solid and strong unit like this and it perfectly fit our need! Great price too…

These mounts are awesome.. super easy to install.. good hardware.. i have 3 in my house

I have a 60" visio 4k TV and this stand works perfectly for it. It is very close to the wall which I like. We were careful to place it correctly, the first time, since there is no tilting option if it is not 100% level you have to start over again. We also planned out our cords before locking it in place. Because the TV has enough USB and plugs to support everything we use, we have no need to change out anything after its mounted. changing whats plugged in after its mounted could pose a problem with how close to the wall it is. However I do prefer the low profile to something that would make the TV stick out too far.

Easy to install. Works great. Great value.

The product works awesome and was super easy to set up. We give it four stars due to the fact that it only leaves about an inch of room from the wall, making it a bit of a task to access the back inputs on the tv.