Golf Cart Rear Seat Trailer Hitch with Receiver for Footrest-Club Car,EZGO,Yamaha

Fit cart perfect did not have to drill any holes. Can use ball off of my truck to move small trailers

Use it to pull garbage can to the road and back.

The holes lined up perfect to the rear seat step where it bolts on, I feel that the reciever is a little oversized make the hitch a little sloppy, but it gets the job done.

I reviewed a lot of hitches that appear to be the exact same hitch some were as high as $75. Best price I could find. I bought several of these and installed them. On one or two occasions I've had to elongate a hole in the bracket. A unibit is a great thing to help with the installation. But in the grand scheme of things no big deal still a nice product

Lined up and bolted on perfect !

Apart from the bolts being a little tight due to the threads being covered with black paint over spray, the instructions being pretty much useless and the nuts requiring a 14mm socket not 13mm as shown on the instructions, I found this hitch to be strong, well made, did what it said it would do, value for money and relatively easy to fit to my Club Car GC.

Not a bad product, good for the money, first thing I would do is throw away the instructions they are useless. First of all they tell you too use a 13mm socket but you actually need a 14mm, also the pics and descriptions are blurry. Make sure you move the front angle bracket all the way forward and move the rear one as well, there is some play due to the oval holes so don’t tighten the bolts all the way. When installing the rear bolts you will have to remove the bolts that hold the rear step platform on the cart in place. Once you do that pull up on the platform and slide the bolt in the hole already on the platform, then tighten it into the welded nut on the bracket. See the pics for reference. But overall a good purchase not hard to install yourself but a extra set of hands isn’t a bad idea. Installed on a 2005 Ezgo with the rear seat platform and no helper handle.

Only simple feedback is to not tighten all the bolts until you get all the bolts in place - would have saved 5 mins of the 10 mins install