FLEXISPOT EN1 One-Piece Standing Desk with 1-Inch Thick Desktop, 48"x30" Electric Height Adjustable Desk for Home Office & Multi-Device Workstations, Mahogany

I've used high-end electric desks at work, and since you typically get what you pay for, I was a bit wary of buying one for home that was so relatively inexpensive. But overall the reviews were positive enough (especially regarding customer service) and there were some good tips regarding assembly, so I figured it was worth the risk. Both boxes arrived with the contents in perfect condition: the boxes used very thick, heavy cardboard, and the corner protectors on the desktop were made of a very dense rubber. I've unpacked a lot of furniture (assembling desks for classrooms and computer labs), and the packaging for this desk puts many so-called "commercial" products to shame. Any damage that might occur would be due to careless shipping and handling - not how the factory packed it. Assembling the desk was straightforward enough, although I've put together enough of this sort of furniture over the years that there weren't any surprises. Just take your time, follow the steps, and you'll be fine. This can be assembled by one person, but a second set of hands will make things easier. All of the pre-drilled holes lined up where they were supposed to. One assembly tip: line up one of the end holes in a leg with its corresponding hole in the desktop, and drop a thin nail into the hole to give it something to pivot around. Then with that hole aligned, line up each of the other holes, again dropping a thin nail into each one until they're all aligned. Then drive the screws, replacing each nail, one at a time. No guesswork, no misaligned screws, no do-overs. The only two pilot holes I had to add were for the center crossbar, so you will need a drill and a small bit (a hand drill or pin vise would work for this). For driving all of the screws I used a hand screwdriver, so I wouldn't run the risk of stripping out the particle board. Everything went together very nicely. There were no stripped threads or alignment issues. Overall, I felt the quality of the desk and and the fit and finish of the parts were excellent and exceeded my expectations. The motor operates pretty quietly, and raises and lowers the desk just fine, even with a bunch of stuff piled on top of it (I don't plan on testing what its limits are - it holds what I need). I had an error message pop up on the controller once when I attempted to recall a saved height, but unplugging the desk from power and reconnecting it resolved that. No issues since. The desk is solid and stable. At its higher settings it will sway a little bit when leaned on, but that's just physics at work - if you need something that's really solid at full height, get something with four legs instead of two. The only (minor) gripe that I have is that the cords could be a bit longer: the one for the control panel so you could reposition it if you needed to; and the power cord which barely reaches the width of the desk. I'm very pleased with this purchase. It met my budget, and exceeded my expectations. It's a good-looking, solid, quality desk. Hopefully it'll hold up over time - but so far, so good!

This table arrived early and was very well packed. It is very heavy and you may need help with lifting and assembly. My sewing room is on the second floor. Senior citizen husband was able to put it together himself but it was not easy. The lift mechanism was actually easy to install and works as expected. The back of the table does not hit the wall but the foot frame does. I have a big sewing machine and the table and machine do not vibrate at all. There is enough room under the table to use a small rolling cart for accessories. The Flexispot table was on sale when I purchased but I would pay full price given its quality and usefulness.

Absolutely the best standing desk for a reasonable price. I am so happy with this purchase. Easy to assemble and love the memory height feature. My husband loved it so much we purchased another one for him. We both work remote and hate that we are sitting all the time. This is a game changer!

The FLEXISPOT EN1 Standing Desk offers excellent value for its price — it’s sturdy, smooth to adjust, and provides plenty of workspace without taking up too much room. The motor is quiet and reliable, making it easy to switch between sitting and standing throughout the day. Assembly is generally straightforward, but one minor issue I ran into was aligning the holes for the leg brackets. It can be difficult to see if they’re perfectly lined up, due to the black gaskets to sink the screws into which makes that step a bit frustrating. Once everything is in place, though, the desk feels solid and stable. Overall, this is a great desk for anyone looking to upgrade to a sit-stand setup — just be prepared to spend a little extra time during assembly to get those brackets positioned correctly.

Good price. It was easy to set up and it feels stable when im using the motor and adjusting the height.

Once assembled, this table was exactly what I needed. The motor lifts the tabletop quietly. It is quite sturdy. I ordered this because I had back issues leaning over my sewing table. Now I will be able to stand comfortably as I work. Assembly notes: I am a 70 year old female and I was able to assemble this myself. It did take me multiple days since I stopped when I ran into minor issues. One of the screws was missing, but I was able to find a compatible one in the garage. The predrilled holes on the underside of the table are VERY small and it was a bit difficult to line the parts up to install the screws. In Step 8, after installing screws in the "circle" locations, it is impossible to find the screw holes in the "square" locations. I simply drilled a couple of starter holes and used them, although I think the table would be just as solid if those were not used.

As an avid gamer, I have been on the lookout for a desk that can enhance my gaming experience and provide the flexibility I need for extended gaming sessions. After using the FLEXISPOT 55 x 28 Inches Electric Stand Up Desk for Gaming, I can confidently say that it has exceeded my expectations in terms of functionality, design, and overall gaming performance. First and foremost, the electric height adjustment feature of this desk is a game-changer. With just a push of a button, I can effortlessly switch between sitting and standing positions, allowing me to find the optimal gaming posture for different gaming scenarios. This flexibility not only enhances comfort but also reduces the strain on my back and neck, especially during long gaming sessions. It's a refreshing change that keeps me engaged and focused on the game at hand. The spacious work surface of the FLEXISPOT desk is perfect for gaming setups. Measuring 55 x 28 inches, it provides ample room for multiple monitors, gaming peripherals, and other accessories. Whether I'm engaging in intense FPS battles or immersing myself in open-world adventures, I never feel limited by the desk's size. The sturdy desktop ensures stability, even when I'm executing fast and precise mouse movements or typing with enthusiasm. The build quality of the FLEXISPOT desk is impressive. It features a solid and durable construction that can withstand the rigors of gaming. The desk remains stable, even during intense moments that involve enthusiastic movements. The attention to detail and high-quality materials used instill confidence in the desk's long-term reliability, ensuring that it can handle the demands of an avid gamer. The assembly process of the FLEXISPOT desk is straightforward. The instructions provided are clear and easy to follow, and all necessary hardware is included. Within no time, I had my gaming desk ready to elevate my gaming experience. That being said, DO be prepared and have a drill handy. You will need to drill screws into the desk. Or at least I did. In conclusion, the FLEXISPOT 55 x 28 Inches Electric Stand Up Desk for Gaming is a fantastic investment for any gaming enthusiast. Its electric height adjustment, spacious work surface, and sturdy build quality make it an ideal gaming companion. With this desk, you can enhance your gaming performance, improve comfort, and create a gaming setup that reflects your passion for gaming. FLEXISPOT has truly delivered a desk that meets the needs of gamers, and I highly recommend it for anyone looking to take their gaming experience to the next level.

I checked reviews before buying this desk, because it is a lot cheaper than I can get locally and I wondered about the quality. I agree with reviewers who like it. It was pretty easy to assemble, and the instructions are a lot better than I'd get from Ikea. I didn't attach the hooks because I don't need them. I suggest testing the mechanism before you install the baffle plates and turn the desk the right way up. I didn't, and had to turn it over again and remove the baffle plates to fix the mechanism, because I had not pushed the rod properly into the motor and only one leg was moving. All in all, a nice looking and well built riser desk at a good price.

Quality 10/10, looks 10/10, but there is 1 disadvantage only, it’s actually wobbly but I’m not bothered by it, I am going to change the countertop because they don’t have the size that I want but overall recommend

Me gustó que de verdad cumple con la función qué promete, llevo usándola unas semanas y de verdad me encantó.

this was one of the good decission made, the product is very steady and works perfectly flawless. strength of the product is also good. worth the purchase