3D Vase Wall Murals for Living Room & Bedroom, DIY Wall Decal, Originality Stickers Gift, Red, 59 X 23 inches

I absolutely love the Hermione Baby 3D Vase Wall Murals DIY Wall Decal! It’s such a creative and elegant way to decorate a space without needing complicated installation. The 3D vase design gives the wall a stylish, artistic look and makes the room feel more lively and unique. I especially love how it adds depth and personality while still keeping a clean, modern aesthetic. The decal was easy to apply, and the adhesive held well without damaging the wall. It’s perfect for anyone who enjoys DIY decorating because you can place and style it in different ways to fit your space. The overall effect is beautiful in both living rooms and bedrooms, and it instantly made my wall feel more polished and thoughtfully decorated. Overall, this is a fun, affordable, and eye-catching decor piece that brings warmth and creativity to any room. Highly recommend!

1st, the delivery. Tracking showed delivered and handed to a resident. It was actually delivered to the wrong address, and my neighbor said it was NOT handed to her but merely left on her front steps. 2nd, the product. Check the pieces to make sure you have them all before you start. Seeing all the pieces and tools in the box made me think this is going to be a mess and a mistake. Take the time to actually read the guide just to get an idea of what and how to handle the pieces. It'll help you with putting them together. Start with taping the paper template on your wall to give you an idea where to position the vase and flowers. Give yourself extra inches on all sides should you decide to spread them out more. You can choose to not follow the template for every single piece. I didn't. 3rd, the adhesion: I started with 1 butterfly to check adhesiveness; but, put it on an area you won't use for the stem and flowers. Eventually, you can leave it and add the 2nd to complete the look (although this wasn't explained in the instructions or shown on the drawings, but it's OK). 4th, the base: I started with the vase as a basis to see how high or low off the floor you want the flower to be. This is where I decided to deviate from the template and move the vase higher. Advise: higher than 5in works better than less, & allow up to 6ft of wall height, and 2-3ft wide. (Use the roll of tape provided to keep template paper in place.) You may not want to remove the protective film just yet; I'd wait until AFTER you have placed all pieces on your wall. From there I ignored the templates and connected the stems according to the picture- like a jigsaw puzzle. Note: You can let each stem piece touch, or allow a few cm in between to give it a unique artsy look, and spread it higher and wider. I did use the flower petal templates to visualize where I want them in proportion to the stems. BTW, the drawing provided showed 4 flowers with 1 being next to the vase. For me that looked like a fallen flower, or an out of place flower, so I decided to have all flowers higher than the vase to appear they are "alive" and "blooming". (Remember, once you stick them in the wall, it'd be very difficult to remove and will not stick again if you choose to replace. You would just have to keep going and make it work.) After 1 flower done, I find it much easier to use the template only for 1-2 petals. This way I can align the remaining 3-4 petals free hand. Note: You do not need to follow the seller's photos exactly to a tee. Bring out your creativeness and give it your own touch. I realized this after my 2nd flower ☺️. Oh well. Lastly, peeling the protective film can be a bit annoying especially when you're trying to find it. But start with a corner using your nail, nothing sharp or metal, else you'll scratch the surfaces and they won't look shiny and pretty. My photos attached are from start to finish. It gave "life" to this wall that would usually be covered, ignored, and snubbed 😄. And I sure enjoyed putting this together and calling it my mini art project. It took me about 10mn for the product overview; 15mns to figure out wall position; 1hr to stick, align, stick, align some more, and remove films. They also provided removal tools to keep should you want to remove it from your wall later on. If you wiped the wall with a dry cloth - microfiber - like I did, it should stay on for a while, if not, forever. Time will tell and will update here of any changes. All in all, I'm very happy with it and recommend others to try it.

I love it!

I loved this!! And it went with the rest of my decor… so well!! Stuck to my wall for almost a year, the two bottom pieces eventually started to peel up but coveralls lasted me until I renewed my least and changed everything!!

I love this item! It was the perfect piece I needed! I love how it's 3D and when people get close they can really see It's beauty. It's easy to put together and after you peel the way film off the top of each piece......simply gorgeous! This is a must!

I’m a wall art kind of person so when I saw this I couldn’t wait to order it. The reviews looked promising so I ordered it. I should have read them more carefully. The base does look nice when you put it on your wall. It’s true that it’s not the easiest thing in the world to put together but with a little time and patience it’s okay. The other reviewers are correct that there was no numbering system as outlined in the instructions. You simply had to figure it out yourself but again, that isn’t too bad. The big problem is it literally will NOT stay attached to the wall! Read the reviews carefully before you purchase this product please! The good reviews are mostly from people who love how it looks once they first put it together! They should wait a day or two (as I did) and then write their review. Another thing, I shop on amazon a lot and have very rarely had an issue with a product. I always appreciate a company that allows you to directly contact them if you experience a problem. That tells me they stand behind their products and want to correct any problems their customers experience. This company cannot be bothered. That should have been my first clue not to purchase this cheap product. I’m the alternative, at least you can contact amazon and return the product if something is damaged or not as advertised. With this product, mostly on your floor but some still on your wall, you’re just out of luck. It’s a shame because it’s pretty and could be a nice product. Thankfully I only threw away $20. I hope you won’t do the same. Update: pictures indicate damage to walls. I’m calling amazon!!!!! I’m officially angry.

It was a DIY I enjoyed it I put it on my kitchen wall everything in my kitchen is red and black and it went perfect

I was impressed by this product. Adhesion was stronger than I thought it would be. Color is bright and glossy. It's not too thick. Installation was easy. It took me approx 35 minutes - probably a little less since I repositioned the template 3 times (that's just me tho). It's easy since most pieces don't touch or connect. Just be careful when sticking on the wall so as not to let it get stuck on the template paper. Removing the pieces from the template was also easy. Its adherence was strong. I wanted to adjust one piece about 1/50" but decided not to. Im probably the only one that can tell (see the pic). But there's a "removal tool" that's included. Unfortunately the pieces won't stick after using it. (Hopefully I'll remember where I put it if/when I move) You'll get the hang of it. I am very pleased with this purchase and highly recommend it. UNTIL I HAD TO REMOVE IT I followed the instructions on how to remove everything using the included tools. Wellllll that didn't work as planned. I learned how to fix drywall though. It took a while. But it hit the wall back to its original smooth clean look. Just know... if you want to remove it, check out the many videos on YouTube. Sand it smooth as you can,pull up excess showing brown drywall. Put the drywall primer on. Sand smooth. Spakle. And repeat. Then paint