1kg Clear UV Resin Hard Type New Formula One Minute Ultraviolet Solar Quick Curing Epoxy Resin Glue for Casting & Coating/Molds/Jewelry Pendants Earrings Bracelets Making/DIY Crafts, Bulky Pack

I've been working with UV resin for many years making jewelry and this resin is my go to for a top coat. It bonds well to other UV resins and the fact that it's low viscosity means it cures beautifully and bubble free (thicker resins hold bubbles in which pop during curing... messing up the surface). It's low viscosity makes it a slower cure than other UV resins, which is a good thing for a top coat as this means less warping & shrinking and less bubbles. I also use heat (a lighter or small torch) to release any trapped bubbles before putting it under the lamp to cure. This resin however doesn't like bezels (many UV resins don't because the UV rays wont reach the bottom of the bezel to cure the resin fully), so I use a faster curing resin that works better is bezels for the base and then top it off with a thin layer of this resin, it gives it a nice bubble free hard finish. I use a Melody Susie 36W UV nail dryer and it works like a champ (I actually use 3 of them for my jewelry business). The negative reviews on this product seem to be from people with little experience with UV resin and their most likely using the wrong lamps (and from the sounds of it they may not be following the directions that are stated on this listing). After seeing all the negative reviews about the amount you get, I weighed it and it actually weighed in over the 250g. This resin does smell strong, but I always use a respirator (even with non-toxic resin, as my health and safety are priority when making mass production jewelry). I searched LONG and hard to find a resin that doesn't leave bubbles when curing... this is the only one I have found that cures bubble free and bonds with other UV resins.

I use both 2-part epoxy and UV resin and have for about 6 years. I've tried nearly every common UV resin on the market and they all have the same basic problems. They yellow quickly, they shrink, they get very hot, they curl, and they are hard to cure without having a slight stickiness on the surface. I only use UV resin for a limited number of things because of the common issues. I saw this upgraded version and decided it was worth a try. As soon as it arrived yesterday I got out a silicone mold with various dome shapes and started making a "galaxy". The resin was cold when it was delivered (I'm in MT) so it was fairly viscous when I started using it but it was easy to deal with a few bubbles. The dome in the picture is about 3/4'' deep. I did it in 5 layers and cured in between. There was no yellowing and far less shrinking than with standard UV resin. When I finished with the piece and popped it out there was a very slight tackiness so I put the piece in the LED/UV lamp for 30 seconds and the tackiness was gone. I think the tackiness occurred because the mold I was using is rather thick and not totally transparent. I am very happy with this product and I'm looking forward to using it in a standard non LED lamp. Additionally, the price for this large container is great. I highly recommend this product over the other common UV resin brands.

I did not like the funky smell. This resin dried very clear. It didn't shrink but it did tend to warp as it dried. Piece was a little sticky until the next day. Price was good. The funky smell was what I disliked most.

This product is excellent & the only brand of UV resin I purchase anymore. It cures quickly with no sticky residue, no yellowing, & minimal shrinkage. The only thing I can think of that might be a downside to some people, depending on how you want to use it, is that it's consistency is very thin & runny compared most other brands of UV resin I've tried before. Personally, I find that to be another positive aspect of this brand though because it leaves less bubbles to pop& it's easier to pop them in the thinner liquid. If it is needed to dome though, It would be a negative attribute. All in all, this resin is 5 starts across the board with a great price cheaper than other brands, easy to use for beginners and experts alike with a performance that outshines it's competition!!!

Ever. Never cures. It’s been months now and this resin still sits in my silicone mold, overly sticky, and leaving tacky residue on my fingers from just touching it enough to try to remove it from the mold. I’ve left the mold and resin under a bright naturally lit window this whole time even; and this is even after sitting under a UV light for half an hour total. I attempted using this resin on a different surface, dragon fly wings, to see if maybe there was something wrong with the resin and using silicone molds. Nope- same issue happened with the wings as did in the mold. I tried being patient, but I ran out of patience. This stuff is terrible.

Not really sure why everyone's whining about this UV resin. Despite the awful smell (hence why you must always wear a mask, regardless whether they claim it's toxic or nah), the resin cures super hard and clear. Furthermore, people claiming that it's not curing properly: Have ya'll tried a nail UV lamp? I'm using a really cheap one off Amazon and it's been curing my keycap projects amazingly. What's more? I even use a LOT of alcohol ink in this UV resin, despite alcohol ink not being compatible for UV resin. I made it cure solid under the UV lamp and it looks AMAZING. Sure, it took about 15 minutes, but that's because alcohol ink & UV resin in general aren't really that compatible. If I can make it work under these conditions, so can everyone else. This is the only brand I'll buy because the price is such a steal and it does its job amazingly, especially for my keycap projects <3

I've used several different clear uv resins, and this one takes FAR longer to set than any other I've used. Most take 2-3 minutes under my uv lamp. This takes 10-15 minutes. Same lamp, same molds, 5x longer to set. That being said, once it's set, it is clear and beautiful. Just be prepared for the longer setting time.

Great value for money, very quick delivery, not as smelly as my normal uv , does dry well IF you do thin layers at a time. Takes a lot longer when adding any colour pigment to it and if you add to much pigment especially powder it will not dry it stays sticky. Can't fault it really for the price. I will buy again if the price stays reasonable

Kupiłam bo słyszałam dużo pozytywnych opinii. Jeszcze nie korzystam, ale jestem pewna że będę zadowolona.

Precis som beskrivningen

ich habe eine kleine Gewindekappe gegossen, (Abform Silikon) der Harz hat an der Sonne binnen Stunden vollkommen ausgehärtet. Frühere Versuche mit Poliester und Epoxy brachten schlechtere Resultate.

Erg fijne hars