Sanus Soundbar Mount For TV Mount Bracket - Height & Depth Adjust, Moves In-Sync With TV, Supports Sound Bars Up To 20 lbs - SASB1-B1

Easy to install. Order before you attach mount to TV to save steps. Seems sturdy snd did what was expected. Be aware the cord hiding requires more cord/cable than came out the box with TV and sound bar.

Like other Sanus products I have purchased, this is a simple, well made product that is easy to install. I used the universal Sanus Soundbar Mount with the Sanus slim wall mount. They are not perfectly compatible, but Sanus provides so many extra washer, bolts, spacers, etc. that you can make just about anything work. This mount allows you to mount your sound bar flush with the bottom of your TV allowing you to eliminate any wires from view. Sanus does it again.

This product has the right idea. It adds onto the basic sanus product well. But the options for mounting the sound bar were inadequate. I had to add some hardware for a solid connection to my sound bar which is a Sony HT 5000, not a rare product. I did get it to work. Also, the ability to raise/lower is nice, but there is not a locking screw to hold it solidly at the preferred height. I added some shaft collars to lock it in at the preferred height and now I have a solid solution I am happy with. But if you don’t have the mechanical skills to do some problem solving, then pay close attention to to what is and is not provided and be sure it will work for you out of the box.

The only one that worked for my situation out of the three I tried. I didn't want to see any wires between soundbar and tv. I also did not want to see brackets extending upward from under the soundbar to the front of it that two other brands had. My soundbar has rear keyholes for wall mounting. This item included option to use them Thus you can't see any wire or any mounting hardware. And the mounts are easily adjustable to rise or lower soundbar or to adjust how far forward or back you want it to be relative to the front of your tv. It was worth the $25 higher price.

This thing works great! Mounted a Sonos arc under a TV with it and it looked great! Just be careful, it almost was too short to reach under the 85” tv.

I would give this a zero and Sanus as well. 2 TV mounts bought what I was told the best. SANUS on the phone recommends this for my new soundbar and I give them them Samsung TV and soundbar specs. Won't work it is not long enough for the size TV and soundbar I have. I called and asked how to modify and was told sorry nothing they can do. Even though it was their customer service who told me what to buy. Do not waste your money they're awful and overpriced with no customer service. So now I have to buy a new soundbar mount on top of this which will be in my garbage where it belongs.

Good design and fairly simple installation (~1 hr). After installation, the Samsung Q990c sound bar (17 lb) slowly sank to the ground under its own weight. Spent another hour fiddling with the locking mechanism to try to keep it in place. In the end, I fabricated my own locking mechanism from scrap wood and U bolts to hold the rods in place vertically. Everything is working now but wouldn't buy this product again. Manufacturer could improve product by fabricating a metal locking piece with a set screw to slide over the rod and lock everything in place for sound bars closer to 20 lbs. Total time spent was ~3 hours installing and fabricating supports.

I would definitely recommend two people mounting this. It’s a wonderful invention and im grateful for it, but I never want to install this again. We have a large tv and it took ages. I do recommend this regardless! Could be user error! :)

It claims to hold a 20 lbs soundbar, but it cannot hold the weight of a Sony HT-A7000 which is less than 20 lbs. The mounting arms are flimsy, held to the mount only at a single point, and so bend under weight. Only suitable for small soundbars.

Wyglada nieźle ale pod cieżkim soundbarem ciutke się ugina na blaszkach. Jednak w porównaniu do innych rozwiązań jest bardzo silny i stabilny dla cięzkich belek.

It has been quite an effort for me to find the right soundbar mount. As the title states, after trying two other highly rated mounts, I found this one from Sanus to be the best. It not only fit my application the best, but it also has a superior design and construction to the other two most commonly found mounts, in my opinion (this: https://www.amazon.co.uk/gp/product/B01DKOR2TE/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1 and this: https://www.amazon.co.uk/gp/product/B077Z7SPTM/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1). I will caveat that last statement by saying that if you have a TV that is mounted VERY flush to the wall with a "no gap" mount, such as The Frame from Samsung, then this Sanus soundbar mount is not for you, as it will create a gap of roughly 16mm between the back of your TV and your TV mount. This is because the Sanus mount gets attached directly to the back of the TV, then the standard TV wall mount bracket goes on top of it. If you have a flush mount TV to the wall, then I would recommend you look at the other two soundbar options in my links above, as they will only increase your TV-to-wall mount gap by 2mm at most . . . or potentially not at all if you can fix them to some unused VESA mounts on your TV. This is the ONLY REASON I would recommend any other soundbar mount, though. Note that the mount in the first link WILL NOT work on a 75" TV, as they're too small, and the mount in the second link WILL work on a 75" TV, but the sound bar is a bit "floppy" and the arms stick out a lot from beyond the soundbar and doesn't look very good. My 75" Samsung Q95T TV is on a Tranquil Mount, which allows it to pull down from above the fireplace, so there is a lot of space behind it. I also have a large soundbar (Samsung Q900T) and I wanted it to be recessed behind my TV so that the front of the soundbar was as flush with the front of the TV as possible. This Sanus mount is the only one I've found that can properly accept the depth of my soundbar without making it stick out WAY beyond the screen. In the photos, I have the mount set for maximum depth, but my Q900T still sticks out a bit. The depth of my soundbar is 138mm, and it overhangs by 28mm, so if you have a soundbar that is 110mm or smaller, then you'd be able to get it completely flush with the front of your TV screen . . . if that's important to you. Just remember that you'll need to have that kind of space between your wall and TV, though, if you plan to mount the soundbar towards the back. The build quality of this mount is very good. My soundbar seems to be much more securely mounted with the Sanus than with the other two mounts I tried. Height adjustment is dead simple and infinitely adjustable to literally any height. This is something that was VERY finicky on the other two mounts I tried and was highly aggravating for me. Installation is fairly straightforward, but you will have to fully remove your wall mount from the back of your TV, which is something you didn't necessarily have to do with the other two mounts I tried. A plethora of hardware is supplied, but my only complaint is that I wish the VESA mounting bolts would have been supplied in length increments of 5mm instead of 10mm. I ended up having to use a few washers on the M8 x 40mm bolts, as the 30mm ones were too short. 35mm would have been perfect. In closing, as long as you have a gap of 20mm or so between your TV and wall right now, then this is 100% the soundbar mount you should buy. It's design and build quality is far better than others on the market, and it works very well with larger TV sizes (75"+). Although other mounts say they can fit a 75" TV, I did not find this to be true, especially with the curved, fixed arm version. The big bonus with this Sanus mount is that the depth is adjustable. Because of my large soundbar, this was a must for me. After trying the other mounts on the market that are not depth adjustable, the back of my soundbar was flush with the back of my TV, and this meant that because of it's size, it looked absolutely ridiculous. That being said, even if you don't need the depth adjustability, I would still opt for this Sanus over all other mounts on the market.

works perfectly with Sanus VLT7-B2

great for my setup ,required modification to met my needs. I'm exspens in fabrication and instalation. Chose this bracket design for the adjustability and least flimsy to other brackets.