JAYEE 24P Drip Irrigation Fittings Kit for 1/2" Tubing (.600 ID), 17mm Parts- 6 Tees, 6 Couplings, 6 Elbows,6 End Cap Plugs- Barded Connectors for Rain Bird Pipe and Sprinkler Systems (24 Pieces Set)

They are near perfect... and, pro tip... leave your supply line in the Sun for a bit, and take a screwdriver or something like that to "slightly" stretch the entry... makes installing these easier, and still 100% effective if done carefully... otherwise, they are TIGHT...

Nice kit. So far so good, worked well with no leaks.

Used for garden 1/2" drip system.

Theyb are a little hard to get installed, but obey in they don't come apart. This is my second season with them and they are holding up to the weather nicely.

Easy install so much better than the solid couplings

I use these to connect my 1/2” tubing for above ground irrigation. I don’t have any complaints about them so far. Barber ends fit snug and are very difficult to remove (letting NO) water through.

These connectors worked very nicely. I set up a system to drip ten newly planted trees and used twenty of these guys in the system. Half inch hose is not always easy to assemble, especially if the sun is not baking your brains, but with a little bit of spit on these connectors they were able to slip is with some reasonable force. But I'll tell you what... it is going to take a mule and a boy to pull them apart. That is what you don't want, coming apart when you don't want them too, and these are holding very nicely. No clamps needed. None at all. Make a mistake? Need to take that hose back off? Got a razor knife? That is what it will take to get it off again. These connectors are fully open and offer no restriction to the water flow, and not one of them are leaking. I will reorder these when I expand my system. They made this farm boy very happy. And my trees are happy too. And we all know that we want our trees to be happy.

These work well as long as you don’t exceed the manufacturers required water pressure guidelines!

quick delivery, easy to use