CH01C 1/4" Thread Camera Mount Holder Mini Adhesive 16mm Base - Dash Cam Permanent Tripod Windshield/Dashboard Mount Holder Fit Sony/Ricoh/HP/GoPro/Oculus(M4 M6 Screw Join Ball Included)

I invested in a quality webcam, namely the Logitech Brio. For such a nice camera, the mount that comes with it is terrible, as is the case for many similar devices. This mount is so much more versatile, such that I no longer have to rotate my monitor to correctly position my camera. Given the mount's light duty for my use case, I'm not too worried about the adhesive failing. Nonetheless, to be safe I wiped the surface it adheres to with alcohol before mounting it.

This camera mount holder works perfectly for my webcam. I was able to position it essentially wherever I would have wanted it. With the double ball joint, I have the freedom to move it more, but considering it's a webcam it'll probably stay where it is for a little while. I have no worries about the adhesion and it coming off the wood (to be fair it's lighter than your average dslr) and it hasn't moved an inch since I permanently installed it.The materials aren't cheap at all, but the black metal on the hinge is wearing off a little bit and appearing a little brown now. I don't think that's worth knocking a whole star off for, though.

This is a fantastic mount in that I can angle my dashcam perfectly and the screw-down knob is nice and tight, but the adhesive that came with it failed quickly (mount with camera kept falling off, hanging by the USB cable).I ended up having to remove the adhesive and replace it with similar double-sided gel-like adhesive by Gorilla Glue. I'd have preferred genuine 3M VHB double-sided foam tape, but I needed something fast to get my dashcam back in action and had the Gorilla Glue tape on hand.

Purchased to fit tight dimension on my vehicle dashboard. The 1/4" camera post is perfect with the Bower 11" phone/tablet holder.

At it’s tightest point it holds fairly well but and bigger bumps or potholes it moves. Had to glue it to stay in the position I wanted on my motorcycle.

This camera mount does exactly what I need it to do. The two joint arm allows me to mount my dash cam up and back from most sunlight and prying eyes. The only downside I experienced was that the threaded end of the mount did not fit the threaded mount of my dash cam. However, it was easy enough to switch out the last piece of the mounting arm with the one from my dash cam's original broken suction cup mount. I don't yet know how the mounting adhesive will do in the summer heat, but even if it falls off, I'll just buy some more adhesive and remount it. I did all the prep work before mounting the adhesive portion to my windshield, so I'm hoping that never happens.UPDATE: I've had this mount for two years and haven't had any problems with it. The adhesive has been rock solid, even through the summer heat.

Exactly what I needed for my Oculus Rift sensors. These mounts are perfect, and adjustable in a variety of ranges. I hung them with command strips just so the adhesive wouldn't rip off the paint.

I'm using this on my Segway for additional lighting since the Segway mini lights are ground level. I wanted something that filled in the shadows cast by the headlights. I stuck i this mount on the flat face of the leg steering post. My lumen cube light works great in this roll but when riding on bumpy surfaces, even if I torque it down, it'll slip. Overall this works well for my needs just wish it held better.

重た目のデジタルカメラには不向きですが軽めのアクションカメラの簡易固定ならこちらで十分です。　両面テープの粘着力がいまいちなので後で考えます。

安さ故に、プラスチックの形状が若干歪んでいて、固定は出来ますが微妙にズレ易いです。貼り付け具合は良いです。

ドラレコにも、吸盤型の土台が付いていたのですが、自分の不注意で土台の一部の部品を壊してしまい、代替を探していたところ、1/4ネジに対応したこちらを見つけました。向きの自由度が高いので助かりました。ただ、ネジについている円盤型のナットですが、ちょっと大きいです。カメラのネジ穴の周囲に何も無ければいいのですが、私のドラレコはネジ穴の直ぐ近くにGPSの部品が突き出ていたので、円盤とぶつかってしまい、上手く固定出来ませんでした。ナット無しでも固定できそうでしたが、やはりナットがある方が緩みを抑えられると思い、ドラレコに付属していたナットと交換しました。結果、上手く固定出来ました。

以前に購入してましたドライブレコーダーの吸盤型のマウントがつける前からダメになり、両面テープでの張り付けタイプのを選びました、使い勝手は良いです。

Does the job.-1 star for poor excuse of adhedive