Description
- ❅〖MAIN PARAMETER〗: Shell Material: Copper shell；Power supply: 110 V；Working voltage: DC48V；Working Current: 4.8A-5A；Power: 360W ；Output power: 250W; Spray volume: 3500- 5000ML / H; Cooling model: Air-cooled;Power line: 1.5 m; Water temperature: 5-50°C (the normal temperature is 30°C).
- ❅〖USE ATTENTION〗: We've connected the wires between the atomizer and transformers, you can use them directly when you receive them. Put the atomizer in water before using, the transformer can not be put in water, then turn on the power supply. The atomizer is suitable installed in a tank with water depth of 7-9CM and is suitable for water level stabilization or artificial water filling. Transformers are moistureproof and not waterproof.
- ❅〖MATERIAL AND SINGLE LINE〗: This product uses high thermal conductivity, high corrosion resistance, good mechanical strength of the metal shell, reducing the temperature difference between the water inside the host, thereby prolonging the life of the product.10 Head fogger hum-idifier is a single sprinkler line using an independent design, and the use of over-current protection circuit, avoiding the burning of a nozzle damaged power lines, and does not affect the normal operation of other jets.
- ❅〖AUTOMATIC CURRENT REGULATION〗: The machine current voltage and temperature by less influence, because each nozzle current electronic automatic adjustment, the current increasing temperature will decrease (does not affect the amount of fog), to avoid serious power tube heat current increasing the vicious cycle and damage the atomizer.
- ❅〖WIDE APPLICATION〗: Ultrasonic fogging technology can be used for many horticultural application including hydroponics, propagation, foliar feeding, grow room and greenhouse hum-idity generation, etc.
Specifications:  Housing material: 304 stainless steel Frequency:1.7MHz Voltage: DC48V Power: 250W Amount of fog: 5kg/h Precautions: -The water surface is higher than the atomizer water level sensor of about 1CM, the atomization effect is suitable, and the water is too deep, then the buoy is needed. -When the nebulizer is stopped, disconnect the power supply and remove the nebulizer from the water. -When the power is on, do not take the atomizer out of the water, or hold it upside down. The atomizer should not be placed on the side of the water. -If the nebulizer is found to be broken, immediately disconnect the power supply and take the nebulizer out of the water to avoid damage to the nebulizer.
