AUPET Water Bottle Carrier,Insulated Neoprene Water bottle Holder Bag Case Pouch Cover 1000ML or 750ML,Adjustable Shoulder Strap, Great for Stainless Steel and Plastic Bottles

This is exactly as pictured! Although it was tough to get on the first time, it makes it easier to keep my water bottle with me and my drink cool (hot if it calls for it)

Beautiful artwork and color. Well made and simple design makes it versatile. Note however that 2.75 inches is the absolute maximum this cover will stretch over and even stretching over that size bottle takes a little effort. Gently pre-stretch it to make it easier. Don't pull so hard that you rip the stitching. I use it on the 20 oz. Contigo AutoSeal water bottle and it fits perfectly, albeit snugly. The top comes up just under the screw-off top similar to what is shown in the picture. Because my water bottle is insulated I cannot speak to its insulative capability. However it is tall enough that if used on a water bottle that is completely covered, it should provide some benefit to a non insulated bottle. The strap is long enough to place diagonally over the shoulder and across the chest, hanging down on the opposite side. Strap is buckle adjustable

Just what I wanted.

This is WAY smaller than advertised. Description says: 750ML:length: 8.5 inches,Diameter: 2.75 inches I specifically measured the 750ml bottle I wanted this for, before ordering to make sure it would fit. The bottle I ordered this for is shorter and wider with a 2.75 inch diameter. I can NOT get the sleeve on this bottle at all. I have a second 750ml bottle that is taller and thinner. I can get the sleeve on; but it is about an inch too short. I would say the true measurements for the 750ml bottle carrier is: Length: 7.50 - 7.75 inches and Diameter: 2.5 inches max. Otherwise, the carrier is cute and seems that it will do the trick with the correct size (maybe order the 1000ml carrier for a 750ml bottle).

To begin the product was as described by the seller. It is a very elegant product due to the coloring and design. I bought this for my wife for her locally bought purple water bottle at a local department store. Being that she is a postal carrier that her new water bottle was getting dinged up in her LLV (postal truck), so this sleeve certainly complimented and did its job to preserve her water bottle. Size parameters were close to what I expected as I did the foot work to measure my wife's water bottle and reference it against the size of this product (I have a picture attached below to demonstrate the fitting). What I found especially user-friendly is that if my measurements were off slightly that this sleeve has a pull-retention strap/ draw string (at the top) that has a small spring loaded clip to hold into place so that the sleeve itself would not necessarily slip off during usage. The sleeve is thick in nature, so I feel that this will also add to the heating/cooling affect for any kind of beverage. The stitching itself is rugged, but is of larger sewing, so after neglected usage that the stitching could become defective or come apart- so take care of your sleeve. Product came with a carrying strap- which is a nice feature. Although if not needed or unwanted that there are (2) 1/2 rings stitched to the sleeve and can accommodate a number of other caring straps. The size overall was snug for the ml/ounce requirement needed. This was a nice overall result to enhance the non-slip characteristic of the sleeve (although other customer experiences will be different so do you measuring of you water bottle as I have read similar reviews that had a negative result to this). The only downfall to this sleeve is that the bottom of the sleeve is equally padded, so your water bottle may not sit perfectly on uneven surfaces or you may want to watch how you set it on even surfaces (it likes to rock a bit). No biggie, just be careful or no biggie because that's why one buy's this product to offer protection. Overall, my wife is pleased with this product and she feels that it will provide her with a durable and stylish serviceable product even for her rugged postal requirements on a daily basis.

Its pretty and it serves its purpose. Only complaint is it's larger than I thought. A 16.9 oz water bottle sinks below the opening. I bought to string over my shoulders while using a riding mower as my water bottles were getting warm in the sun and occasionally falling out of the cup holder. This does allow me to do what I intended. But because the bottle sits below the opening, and this material is so thick, the opening wont close up all the way. I end up with grass clippings all inside the carrier. So it's a little annoying and inconvenient in its own way. It still allows me to keep my water cold and from falling off the mower while mowing which was why I bought it. If it was the right size it would be a perfect 5 stars.

I really like these. They’re a good product at a good price & seem to keep things cooler for longer. I’ve purchased both sizes for my 24 oz. Contigo AUTOSEAL Chill Stainless Steel Water Bottles. The smaller size fits snugly but is too short while the larger size has the height but is very loose/too wide. I love the Contigo bottles but they dent easily when dropped & I was hoping these would protect them from damage. Aside from that, I like them very much & enjoy the fun design choices.

A bit taller than expected but it works fine. Seems like good quality. Pretty much as described. Would buy again.

I always carry a water bottle with me and wanted some bag to make it easier.. after searching a lot, found this one.. this is the best looking one I found so far. Quality is good neoprene, handle is average.. got it in good condition.. fits all my bottles (have tried upto 1ltr).. comfortable to wear.. have to see if it lasts.. but it's great so far! Please vote if helpful and have a wonderful day! 😊

A decent product. Perfectly fits 300 ml of milton steel flask. Also fits well 160 ml milton flask with small cup.