ARIATMen's Workhog Wide Square Toe Tall Steel Toe Work Boot

Sizing:Short version: I'd recommend trying a half size below your running shoe size(e.g. size 11 running, get size 10.5 in these). Then if your feet are wide in some of your shoes, get wide (EE). The leather will break in on tight shoes, but not the steel toe.Long version: Sizing with Ariat boots I've found to be very tricky, and that's probably my only complaint with these boots or the company. In short, I've found all Ariat boot styles to fit slightly differently. On a trip to Nashville I tried on numerous pairs of Ariat boots and from everything from a 9-EE (wde) to a 11.5-R (regular) to fit me well. In my other steel toe boots, Belleville 550 ST (combat style opposed to western) I wear a 10.5-R. Typically in shoes that run narrow, I need wide shoes. My feet are wide, but not so wide that I always need wide footwear. Based on my experience with the sizing and what I'd put on, I tried an 11-EE in these first (same as my running shoe size), which was slightly too big. Ariat's description of how to fit them reads:"When you slide your foot into a boot, use either boot pulls to pull it on while sitting, or stand up in to the boots. A well-fitting boot should fit your heel snugly. Expect a small amount of movement (lift) in the heel as you walk, because a boot that fits properly should flex as you walk, and your heel should lift a little, but not too much. New boots will have a stiffer sole. As you break in the boot, the sole will flex to a comfortable level and most slippage should stop."I found this to be a bit misleading. There was about 5mm extra room with my thumb on the toe of the sole in front of my foot, and my heel lifted from the boot slightly as I walked. I felt like that matched their description, but it didn't feel right. It seemed loose. So I ordered a pair a size down (10.5-EE) and it was a perfect fit. So in summation, I found that the best fit was to match the same size as my other steel toe boots and go with wide. Leather will break in so you want them to be pretty snug when you first wear them The steel toe won't however, so if it's hurting your toes or pinching them on the sides at the steel toe, you need to try a larger size.Quality -Initial:I will update this review when I've had more time to wear the boots and get a feel for how they hold up. That said, my initial impression is high. The boots are very comfortable, once you're in the right size, and feel great. The sole is much nicer than most boots I've owned. They go into detail on the purpose of each layer (see the Ariat ATS Max photo in the product description). At this point I'm confident that the slight aeration to the soles will help pull away moisture so that it doesn't feel like your standing in a puddle after slight to moderate sweating. The arch support is also good, a problem I usually have with other shoes and need to buy my own inserts. It's not so extreme that I think people with flatter feet than mine will have issue but enough that it's comfortable even with my higher arches. With work socks on the material had the right amount of friction that it doesn't slide nor stick so much that it irritates my feet or is hard to remove, perfect amount of grip. The steel toe is great, and I barely notice it. I've had other western style boots where the steel toe was sort of wedged and it was very uncomfortable on my big toe. No such issue here. These are honestly some of the most comfortable boots I've owned out of the box. I won't need to break these in as much as other's I've owned.The material on the outside is as nice and as of high a level of workmanship as the photos and what you would expect from Ariat. Stitching and leather are superb. Honestly the quality of these boots is high enough that they're great for work in rough environments or even as nice boots for wearing out if kept clean.Cons: Price is high, although it is worth it. Sizing is tricky, but once you have that down it's a great fit.These boots met and exceeded my expectations. I typically am not one to give 5 stars unless I'm truly impressed with the product and have no critique. I would dock it 0.5 stars for difficulty with sizing and price, but not worth docking a whole star.

Tread pieces that are yellow came off within a few hours. Sole is weak but boot fits well. Too expensive for the sole to be losing pieces and chipping off

Boots arrived looking almost perfect. On boot had a small scratch by heel. Didn't really bother me because they look great and feel like good quality. I wear 10.5 and that's what I ordered. Was surprised they fit nice. Had them 3 days and feel good walking in them. These my first Ariats so hope they don't disappoint after about a year.

Made my ankles a little sore when breaking them in but that only took about a week. I wish they were waterproof but using mink oil on them has made them at least water resistant. They are cooler than the waterproof ones I used to have though. Tough to find good swamp work boots. I also wish I could get these with a rubber toe guard so I wouldn't keep slicing up the leather by accident.Hopefully they'll hold up a little better than my last pair of Ariat boots, which only lasted me 2.5 years.UPDATE after 7 months: These boots are not standing up to daily ranch work. I have treated them with mink oil regularly for the swampy climate I work in and I'm very disappointed that cracks still started to form in the leather within 4-5 months. On top of that the rubber soles have started to crack and fall apart. NOT what I wanted from supposed 'top of the market' work boots!!! I shelled out extra $$ because I expect a product that's built to LAST! And I see they've gone up $50 in price. Screw that!Can anyone recommend a brand that still makes good boots these days?

I've been wearing a pair of these boots for the last 2 1/2 years and I found them durable and comfortable. That is why I bought another pair, the product is superior to others I've tried in the price range.I didn't get the exact replacement this time because the version I bought originally is not available so I went for a small upgrade and I'm not disappointed.The only complaint I have is that boots have gone up in price considerably since I last purchased Ariat work boots due to Stagflation.Overall I'd say Fit - ✔, Quality - ✔, Priced for the market 🤬, but a good value in comparison to others. I'm just happy they were available in my size!

These Steel toed boots were a gift for my grandson. He said he has never ordered a pair of boots from anywhere and got the right size and fit. He was totally amazed at the fit and how nice they looked on his foot. I cannot take a picture of them because he does not live with me, and they are on his feet. I do not know much about steel toed boots, but I did look them over and they are of a fine quality, and he said he will be ordering his boots from here from now on and telling his friends.

I purchased these for my grandson for his birthday. He said that the fit was great. I usually purchase twisted x for him but was unable to find any in his size 15 d so I tried these. Glad I did because not only are they a safety boot but they’re great looking boots as well. Shipping was phenomenal as it said the 12th-16th received them on the 13th which was great. 👍🏻

Very comfortable boot with steel toe. Just be careful of breaking period. After wearing for 3 weeks the footbed broke in. I now realize. I Should of gone 1/2 size down. But wearing proper socks,I haven’t had any issue. Wool or heavy cotton socks a must.Toe room is perfect with square toe. After break in the heel lift is ok just wish I went size down so it “firmly” placed foot. It’s no bad but Small slippage is noticeable.Overall, awesome boot with western flair and compliments across the board at work. It’s a great shoe and will buy againUse in winter ( snow, slush..etc, great grip)

Excellent quality, perfect fitLove them

Very nice boots, comfy and look great.But they just arent made like they used to be. But what is anymore....

Great, quality

I bought a pair of Ariat work boots last year 10D is stamped in the boot it fit perfect. On the tag in the boot are some numbers ASTM F2413-11 Ml/75 C/75 EH . I have ordered two pairs now this year, 10D it was two narrow and too small. So then I ordered a 10 Wide because 10D wasn't a choice, and it came 10EE and it is like wearing a rubber boot old style ,sloppy loose. So I don't know what to do at this point. I may have ordered my first pair of ARIAT Boots right from Ariat.

Fit perfect