A2212 2200KV Brushless Motor +SG90 Servo+30A ESC+6035 Propeller

Very durable great performance no overheating problems. I've made several different models with these. They have plenty of power. They work well. Very impressed for the money. Totally satisfied with my purchase and I'm likely to buy them again

This package is perfectly fine if you use a 2s with the provided prop. I am never satisfied with ‘stock’ and have to push the limits. I replaced the 6” 2 bladed prop with an 8” 3 bladed prop and ran 3s 2200mha 80c battery… it did very impressive things, and then the esc stopped responding… forever. Super fun, probably fine if you don’t go pushing the limits… but where is the fun in that? Servos are just fine.

Considering how cheap it is while getting both a motor and an esc, it's not a bad deal. The motor appears to be balanced pretty well, though the props are a little out of balance and fairly cheap. The motor has plenty of power, and you'll get a lot of thrust from the included props. The esc worked good until I tried attaching a 4S battery to it. Then it lasted about a minute before it blew. No fault of the seller however since it is listed as 2S-3S. So if you want something cheap to test on a build, this would be a good set up to start with.

Works great I use this on my combat plane and has a lot of power with a 2cell battery. This plane hauls butttttt. Just check after 5 min of flight to make sure the speed controller does not to hot I had to play with the prop size to get it to run thru a full battery.

Sometime ago I purchased this item from FPVKing. As a “noobee ” I crashed my rc plane and broke the motor mount. After having no success at finding a replacement. I got in touch with FPVKing customer service. They were able to solve my problem and get me back to flying. Kudos to them and the service they provided.

I bought this kit for the project with my son (DIY RC plane). I tested the kit right after getting it. ESC was dead out of the box, so I took my own ESC (Hobbywing Platinum 40A) to test the rest. The motor seemed to try to start by shaking a little but never launched. I heard a click sound at the start (throttle stick up on the transmitter) then a triple-clicking sound after shifting the throttle stick down. The only things that were working there are servos. At least they were responded by being connected to my Futaba receiver. I was hoped to get something working for a cheap price. Unfortunately, no magic happened, the price corresponds to the quality so I ordered better components for a higher price... UPD: OK, I decided to give this guy a second chance. Today I got another set. Everything works fine, with no glitches or critical malfunctions. But I still found a few issues: 1) the motor's mounting rack - screw bolts are not hiding in their holes under the surface protruding over it. 2) There were no screws to attach the motor to the plane. 3) Two strange additional holes were found in the mounting rack. I got no idea what do they need for? All the rest looks fine. Now let’s see how long it will continue to be functional. UPD 2: I changed the rate to one star - I lost ESC and both servos after the very first crash. So technically only the motor remained after all (those props are junk, so I never even planned to use them). For this price, you can buy a better motor.

First the package included the wrong props..had 8060 not the 6035 as advertised..Second..the esc was unresponsive went through calibration instructions...DEAD...3rd...I powered the motor on another esc I have...35 amp with a 3s 1300mah battery...motor became extremely hot after 30 seconds and that was it...servos seem fine...sent a message to the seller...they replied looking to resolve the issue...but the email link provided does not work...so I'm here...FPVKING...if your reading this I would like to get it resolved....thanks

Carful with this one, the ESC is prone to catching on fire but everything else was great. Pro tip the 30A means the amperage so make sure your battery is 30 or under.