Timer WiFi 10 AMP 6V 12V 18V 24V TIME ON Off DELAY CONFIGURABLE, Cycling and Optional Trigger

The first timer I got only powered up once, never connected to my phone via WiFi. I contacted timer.shop as per the instructions from the package. I explained what was going on. They returned my email next day and less than a week later I had the replacement. No questions asked. Took about 30 seconds to connect and a few minutes to program. Very versatile timer. It's a lot smaller than I thought it would be. Think the size of a pack of matches but a bit thicker. Gotta say I'd buy again!

When the timer was delivered it failed when first hooked to power. I contacted the seller and with no hassles the replacement timer arrived in a few days. I have now successfully tested the timer and it does most anything you want. Enormous number of widely varying functions to cover most any need. Amazing that it can provide 10 amps of current in such a small package. Never again will I need to use a relay for switching up to 10 amps. Very easy to wire it up and extremely easy to program. I had a sort of unconventional circuit for this timer and the seller was right on top of helping me figure out how to wire it. I will buy this again as I can find many uses.

I am using this timer to control a small diaphragm pump that keeps my bilge dry. The timer was very easy to program to run the pump for 3 minutes every 6 hours. Actually, I am only using a small portion of the available features this timer offers.My project has been working for > 3 months and I'm very happy with this purchase.

The only solution to wire sequential turn signal lights in a post blinker relay situation! I needed to keep constant power on the sequential LED strip lights, when the turn signal was engaged, but I could only find a turn signal feed that was post blinker relay. This timer solved my problem by triggering by the turn signal input and the timer configured to keep constant voltage on the LED strip lights. When the turn signal is disabled, the LED strip lights turn off as well. I used timer function 13, with digital trigger set to 2. I did have to adjust the low trigger voltage down very low so it recognizes the trigger. After playing with T1 time on settings, I was able to get exactly the constant on time aI wanted. Originally I had it set too long and when I disengaged the turn signal, my lights kept flashing fir a few seconds. (Maybe you like that capability, but I didn’t)

I only needed a basic timed on delay so programmed Function 1, works perfectly. Very easy to program; initialized wifi on the timer (white wire to ground), connected from my phone, accessed the web page and entered the appropriate settings. Took less than 2 minutes, done.Timer does a ton more so used a breadboard and some LEDs and switches and played with the other timer functions. Very cool and I have some ideas of other projects I can use this timer for. Well done!

So i've been using the previous model for years and they have been great. I became an expert in programing them and great small units for all types of projects. This new wifi one was very easy to setup. This is nice for various projects because if there is a need to reprogram the unit you don't have to take everything apart. Just enable the wifi mode and change your times or program within seconds. This is a game changer if you expect to need to change settings frequently. Also still has the same lower power mode as the previous units so it's a win win in my book, few extra dollars well spent. This unit is going in my bass boat to make sure I don't accidentally leave lights and other accessories on and kill my battery. I assume it will survive the heat and weather like the other units just have to put it to the test.

Used to turn on headlamps and taillights when using wipers which is a requirement in many states. I already have relays for the dipped and main beam headlamps and led bulbs in the taillights so this should work great. I am waiting for a new wiper delay switch so I can see which wire will work best. I used function 10 with timer 1 set at 10 seconds which is the delay to turn on the lamps. This will enable a quick wash or wipe of the windshield without turning on the lamps. I used 20 seconds for timer 2 which is the time the lights will stay on after turning off the wipers. This is so the lights will stay on when using the wiper delay. Tested as expected and very easy to program. Recommend..

The instruction manual link provided worked flawlessly. Instructions where easy to follow. Literally had this timer programmed in 3 minutes and installed in my car in 15 minutes. The car project was installing an Android Auto and Carplay (phone mirroring) module with a reverse camera. The module needed a trigger to turn on. The manufacturer suggested to install a normally open momentary switch. I didn't want to add a switch . First it would have to be visible in the cars cabin. Secondly it will need to be manually pushed to startup the module. I wanted this to act like an OEM install. This timer automatically triggers the module without any actions by the driver. Oh yes it is small and easy to hide under the dash.