EONLION 3 Pack Gas Can Replacement Spout Kit, Flexible Pour Nozzle with Gasket, Stopper Caps, Collar Caps, Stripe Cap, for Water Jugs and Old Can

They work. They just wish the were a little longer.

These spouts work but there are a number of problems. Threads won't fit all of my cans. The end caps for the spouts don't even match their own product. The main problem is after less than two years, one of the spouts broke near the can after mostly sitting there, with only a few actual uses.

Does what I want with no hassle Installation. Just wish I'd bought more.

Like for easy pour nozzle needs to be a little longer and flexible

I really can't stand all the new, push here- hold here nozzles. You need to be a HULK in order to use them and me...well, I'm not a hulk. I bought these hoping they would be my saving grace in not having to yell for my husband every time the riding lawn mower needs to be refueled. But they are NOT made to handle anything over 1 gallon. They do not keep a "seal" and the gas came pouring out of the nozzle and the lower portion of the neck, not to mention when the temp rises like it does in the summer months - the end caps popped off and I had a heck of a time scavenger hunting for them. I transferred them to small tanks (1 gallon ) that I use on our lawn equipment that takes special fuel (edger, weed wacker, blower) and they are able to handle that kind of drainage perfectly. I would recommend these for gallon tanks NOTHING bigger.

Great product but experienced the following problems - see photos as wellIt is very difficult to screw the spout onto the gas can - the threads are very tight and there is not much grip on the yellow connector - and yes I did confirm I selected the correct one to match the threads on the gas can. I added a bit of silicon grease which made it a little easier but still difficult to screw onto the gas can and even more difficult to remove when you need to refillThe black seal at the bottom of the spout which seals against the gas can is not very robust -one of them split all the way around as shown in the picture and no longer covers the end of the spout - would be great if seller would send a replacement as without it the spout does not sit securely on the gas can.The yellow retainer for securing the nozzle end cap has a tip that is too small and just slips back through the cap and does not secure it - had to add a bead of hot melt glue to enlarge.

So last summer I purchased spout replacements. The "Black" ones you see for sale. They were the longer skinny spouts. They were complete junk! Did not fit well, leaked and poured slower that the mandated spouts that come with the cans these days. I can't begin to describe the messes made trying to make use of them. This type here is of better quality. I used on 2 different style of jugs and they worked much better. The pour rate was 10 X better that the others purchased last summer and no leaks. The rubber seal and the caps are made different and do a much better job. I don't know how long they will last. poured gas on a 35 degree F morning and the flexibility of the spout was good. Time will tell. Happy so far. One note they do not come with a trash screen, and the "other brand" screens would not fit this spout.

So glad I finally replaced my gas can spigots. The OME spigot was a design from hell. It was supposed to be safer than this style but in practice made my cans swell in the heat and was ridiculously difficult to operate often spilling gas all over the equipment. This product is a tried and true design; straight forward, easily allows me to fill my equipment, and I can vent my cans so they don’t swell.