2 Pack Racing Seats, Universal PVC Leather Bucket Seats Sport Pair Adjustable Seats with Sliders (Black & Beige/Tan Brown)

I decided to give these seats a try after seeing a successful install in a C5 on YouTube. While these seats do fit, they are a VERY tight fit and required me to remove the plastic cover for the recline housing on both sides AND have the reclining lever towards the middle of the car next to the seat belt receptacles. Overall I am impressed with the quality, comfort and style of these over the stock seats.

The installation was a bit tricky which prevented the seats from sliding forward and back. This was not a defect of the seat itself, rather it was due to the narrow cockpit of the vehicle. Once I was able to elevate the seat rails up by 50mm, the seats moved forward and back. Overall, these seats are very supportive and comfortable compared to the OEM seats (plus they look awesome)!

I wanted to post that I purchased these seats as a Christmas present for my son and the drivers seat broke. I contacted the company and they replaced the seat and gave a 1 year warranty. I was very satisfied with the prompt servicea and how great the representative was. Thank you Marlene

Good seats, will see how they hold up. Will fit a C5 Corvette if you switch the passenger to the driver's side and vice versa as others have stated. One thing worth mentioning is with Planted brackets they do touch the roof panel and squeak. Also the range of slider adjustment is small, I'm 5'8" and they do work for me. I'd recommend extra low brackets found on ebay.

After watching a few videos and reading a few threads on the forum, I decided to give these a shot. For the price, I don't think you can beat them. I bought the brackets on here and used a step bit to drill out two new holes so that everything would line up. The holes were roughly, if memory serves, 14.5" on center. The seats arrived with no damage.For these to fit in the C5, the recline lever has to be facing the tunnel or else it will contact the trim piece for the seatbelt retractor. While they do fit, they are pretty tight; the recline lever is almost inaccessible because of being pressed against the transmission tunnel. I didn't really find this to be a problem because, at least in a C5, I'm just going to set the recline once and not mess with it. Sliding the seats are also tricky as it's a tight fit. Again, once I set the recline I just slid them to where I wanted them and will just leave them; there's not much room to slide seats in a Corvette anyways.I bought the hardware from the orange box store. I needed 8 5/16"-18 x 3/4", 8 5/16" washers and 8 5/16"-18 nuts. I also needed two bolts for the seat belt receptacle but can't remember the size, but they were 3/4" in length. I purchased all stainless steel hardware. Pretty much everything I saw and read said to use cap head screws (allen head) but I could only find the traditional bolt heads that take a socket/wrench. The reason the allen head bolts are recommended is because you cannot get a wrench/socket around the head of the bolt due to the rails. However, I was still able to tighten them down once the bolt started to bite and also used some Loctite.While a tight fit, they were substantially cheaper than the other options I was looking at. Keeping the price in mind, I am very satisfied with these seats.

(Garbage) Before you buy, take in count that you have to purchase an adapter beside the seats and probably hire a professional to install it which to me is too expensive and not worth it.If you are going to return the product after all, vendor will try to make you pay for the return shipping (cost as much as the seats).

Didn’t fit 1998 C5 corvette. Good quality

The seats are great. Had a little issue with the drives seat but the company came through. They are and awesome company to work with I highly recommend.