USB-C Hub, 8-in-1 Multiport Ethernet Adapter with 4K@60Hz HDMI Port

Original Review (updates below): ----- The moment I noticed this thing on Amazon, I bought it and it literally just arrived. Finally, 4K60 over just USB-C with other ports (including making up to 10Gbps available to them) for a reasonable price. Unfortunately, the first two things I've done with it were both disappointing. I'll cut to the chase, the power delivery pass through isn't working with one of their own chargers. The first device I tried connecting this with is my Anker PD4 with one USB-C cable as the only thing plugged into it so I can test the truly up to 100W (-15 for its own power) claims. I've tried connecting it with Apple's 2m USB-C charge cable (100w capable) and an equivalent CableMatters cable that also supports 100W. When plugged directly into my laptop, both of these cables immediately start charging it and show up as 100W power sources. When this Anker hub is plugged in and either of them is connected to the power delivery port on the side of it, the laptop does not charge (laptop is a 16" Macbook Pro, I've tried multiple ports just for the heck of it). My second complaint is that when absolutely nothing is plugged into it, it becomes fairly warm to the touch. Why, when it's doing nothing, is it hot? I'm clearly not running data or even power through it so I have low hopes for it under load. The fact that it doesn't work in exactly the scenario they want it to most (a MacBook Pro with one of their own chargers) seems like a pretty big fail. I've got lots of USB-C things though so I thought I'd grab a couple and try those. Using an Apple 96W USB-C charger, the device does pass through power delivery properly. It shows up as providing 79W to the laptop (siphoning off 17W in this instance). I also have a 56W Aukey charger that splits power between a USB-A port and a USB-C port that can provide 45W of power delivery. When plugged into that charger it does appear to work as well and appears in macOS as a 30W power source. Maybe the problem is the Anker PD4? But it works fine providing power to the laptop directly. Would love to hear from Anker about these two products working together and what I should actually expect. Having it be unreliable for power delivery isn't great, but power and heat aside (it is getting a little bit warmer now that it's providing power from the Apple power adapter, but still definitely holdable), the hardware looks and feels good and the cable feels durable. Worth also noting that there's a white LED ring on the side of it that appears to be always on when it's plugged in. Don't know why it needs an LED. ----- Update, June 22, 2020: I've done some more testing and Anker has reached out to me to investigate what might be the issue. I can say that the hub works as I would expect from a quick test with my iPad Pro 11" with the above functioning chargers. It was able to pass through power with the 96W Apple Charger on the other end to both the iPad port as well as a Magic Keyboard port. The ethernet adapter showed up in iOS settings and an external drive was functional. When connected via the Magic Keyboard, which is a power only connection, as expected it provided only power. Still no power passthrough of any kind when connected to the PD4. ----- Update July 1, 2020: I've written back and forth with Anker and they've sent me a replacement hub. It also doesn't work with the PD4. I've tried multiple USB-C cables but they have also shipped a cable to test with it. For now I'm increasing the review from 2 to 3 stars because I am more and more suspicious about the PD4 and less about this hub. They claim that they have tested the setup I have separately without issue, and I've sent video showing the problems I've encountered, so the troubleshooting is ongoing. Have had a chance to use Ethernet on it without issue. Still need to try to test out its throughput when trying to use a 10Gbps USB-C enclosure and a 4K60 monitor at the same time (+ ethernet). More updates to come. ----- Update July 10, 2020: I've continued to talk with Anker support and they shipped me a replacement PD4. The one I had was labeled as "Iteration 1" on its barcode, the one I got back was labeled "Iteration 2". I tested it out and it works perfectly with this hub, passing through the correct amount of power to multiple Macbook Pros and fast charging an iPad Pro. Clearly the fault doesn't lie with this hub and is instead an issue with the first iteration PD4, so I'm updating my review accordingly. Working with Anker support was great. I've also been able to test USB-C throughput (without driving a display as well so far) and it properly utilizes 10Gbps. I've attached some extra images showing various devices connected to it (keyboard dongle, SD card, USB-C 10Gbps external SSD enclosure, USB sound card, ethernet).

This is an awesome hub! Anker always makes really quality products, and this one is no exception. Has everything you need, while still being in a nice compact package. Awesome to keep in your bag and you’d hardly know it’s there. Nice quality finish doesn’t scratch easy. W highly recommend it. Great value!

I am exploring ways to make my iPad behave like a laptop, and with this little device, I am on my way. One of my primary concerns is that sometimes I have to troubleshoot routers at other people's homes. So I tried it out on my home. I found that I had to install an app from the manufacturer to make it work, then I had to reboot the router. Then, I got an amazing interface that was not the same as the interface on my laptop. It told me that I need a firmware update, but at this point, I am more comfortable doing the update on my laptop. One quirk I don't understand is that I plugged the PD port into my power cube, and the iPad told me it wasn't charging. That isn't good. I might have to return it and shop for a different brand. The newer Apple devices are awfully picky as to where they get their power from. Update: I found the email for Anker customer support, sent an email, and they got right back to me. Here is what they said: "Please first know: Due to the power input limitations of mobile devices, this hub can not provide pass-through charging to tablets (including iPad Pro/Air) or phones when using the original wall charger that came with your mobile device. To support full-speed charging for iPad Pro/Air, use an adapter that supports at least 15V (45W)." I found that the 3 foot power cord that Apple sent me is nowhere near long enough for charging while using the dock, so I sent away for a 45W charger and a 10 foot USB-C to USB-C charging cable that was compatible with iPad. Please be aware that Apple has circuitry embedded in the cord and you cannot use just any cord. The equipment I got was this: Charger https://smile.amazon.com/gp/product/B083BRKMJQ/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 Cord https://smile.amazon.com/gp/product/B07LF1FNRV/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 Cords are not rated in either volts or watts, so I sent another email to Anker asking if a 3 amp cable would work, and they told me that it should. Pay attention to the amperage when purchasing a cable to go with a high wattage charger. The cord that I purchased also comes in a 15 foot length. If this rig works, I will also purchase the 15 foot cord. The reason being that sometimes I need to do stuff in other people's houses, and I cannot count on a nearby outlet. I will update when the new equipment comes. Update: I installed a 45W charger with a USB-C TO USB-C cable that was advertised for iPads, and now my iPad is charging through the PD port, so that problem is taken care of. I sold the iPad and bought a 2019 MacBook Pro. The MacBook Pro has four Type C USB ports only, no others. I use one of the ports on the Mac for charging and another for the hub. I use the Type 3 USB ports on the hub for my mouse and graphic tablet. I like wired mice, because they use a wire for power, are more reliable, and do not generate dead batteries to pollute the environment. I wish the hub had an additional Type 2 or 3 USB port. Maybe I will buy an additional adapter, because I can't find a hub that sports the extra ports. I looked for a mouse that would plug into a USB C port, but did not find one to my taste. I like wired keyboards for the same reason I like wired mice. At any rate, all these wires that will not plug directly into my computer makes kind of a clutter, as depicted in my photo. Not much I can do about it at this stage of the game, however.

The Anker 555 8-in-1 USB-C Hub is a good buy if you’re looking for a hub from a reputable brand. I use it with an M1 Macbook Air, and it has been reliable so far. This hub has the following ports: 1 USB-C data port, 1 USB-C Power Delivery Port, 2 USB-A data ports, 1 HDMI port, an Ethernet port, and a microSD/SD card reader. Charging, PD (Power Delivery): To keep my Macbook charging, I connect a PD (Power Delivery) capable cable to the USB-C port meant for PD. (The other USB-C Port on this hub is meant only for data.) Once connected, the hub will eventually become warm to the touch, but this hasn’t caused any problems so far. Video Performance - no problems in 1440p I can connect my 1440p 144hz monitor to this hub’s HDMI port and my Macbook Air has no problem outputting a refresh speed of 144hz, as well the lower refresh rates of 120hz and 60hz. (I do not have a 4k monitor, so I could not test that.) USB-A Ports - works flawlessly I’ve tried keyboards, USB Drives, and even gaming Mice. All of these devices work as expected when connected to the USB-A Ports. Ethernet - Excellent speed I've connect this hub using an Ethernet cable to Gigabit speed Internet. The speed is just as fast as other computers on the network, and there is no slowdown at all, even with most of the ports on the hub being used. Gaming Keyboards with USB-C connectors - some issues. Some peripherals such as keyboards with USB-C connectors may not work on the USB-C ports on this hub. I tried using a Glorious GMMK Mechanical Keyboard and it did not work with this hub’s USB-C ports. (Of course you could try to simply use a USB-C to USB-A adaptor and then connect via the other USB ports on the hub instead.) Extension Cable - Use a Thunderbolt 4 cable Although this is totally optional, I like to use a small, 6-inch USB-C Extension cable to allow this hub to have more slack away from my laptop when connected. To allow this to work, I had to use a Thunderbolt 4 extension cable. I've tried other cables such as a Thunderbolt 3 extension cable. However, some of the attached devices on the hub were not recognized. Only the the Thunderbolt 4 extension cable allowed all my attached devices to be recognized. Other devices I have successfully connected an external SSD via the USB-C data port on this hub. I also regularly use an external DAC using the USB-A ports connecting to an IFI HIP DAC. Both of these devices work perfectly with this hub. Data transfer speed is rated at 10Gbs, though I haven't actually confirmed that. It works well enough for my purposes of transferring text documents and the occasional batch of vacation photos to my external SSD. Conclusion This hub from Anker is rated at 10Gbs which is plenty for me. But if you regularly transfer large amounts of data (like for video editing), I would instead recommend a powered docking station such as those from CalDigit. But for me, this portable hub does everything I need, and for much less money.

This port extender has the ports your MacBook Air needs, but it's bigger than you think. The cord is 6" which is 2" linger than you'd like. But it works well.

I was trying to connect a portable external DVD writer to my MacBook. I needed this powered hub to make that work. It was everything that I needed and performed flawlessly. It’s small enough and portable enough that it will become my go-to hub device.

I bought this a while back and while shopping for a second dock for my wife, I came across a lot of reviews where people are complaining about this thing. I relate to those experiences, but the problem is not the dock itself. Mine worked at first and then it started to work intermittently. Sometimes, my external monitor would come on and sometimes it wouldn't. I tried it with different Anker cables (I had been using the one that came with it) and I even tried it with different Macbooks. At one point, I actually thought the problem was probably with Apple. It was really frustrating and annoying. But then I decided to try a new Thunderbolt 4 cable I had purchased from Cable Matters. I didn't really expect that to make a difference, but it solved everything. It has worked perfectly for over a year now. I connect my laptop and I can instantly use my monitor and get to work without a hassle. I've since realized that while Anker makes good power bricks and even hubs, they make really crappy cables. I have a LOT of them, unfortunately. They short out very quickly and I've noticed they often separate near the connectors. For stuff like lightning cables, you know right away when it stops working. But Thunderbolt cables can be confusing because they don't just fail. A bad cable will work really well sometimes and then not at all other times. It doesn't make sense that you would get perfect resolution on your monitor one day and not even be able to get it to turn on the next. For high bandwidth like 4K external monitors, you really just need a high quality, reliable cable. Don't try to save money on that and don't buy cables from Anker. I hope this is helpful to people.

tl;dr: If you don't care about gigabit ethernet speeds it's fine. This is a nice dongle that adds most ports you'd want. Gets a little warm, short cable, but generally has held up great for years, compatible with Macbooks, Steam Deck, and PCs. Except the Ethernet speeds are slow under typical conditions! I spent some time troubleshooting why I was only getting USB 2.0-like speeds on this Anker USB-C hub's "gigabit" ethernet. I replicated this on two different Macbooks (M1 and M3), which see this hub having two separate internal USB controllers, one USB controller powers the ethernet jack. I noticed the following: When connected directly to a Macbook's Thunderbolt 4 port (Macbook -> Anker hub), this hub's USB controller that powers Ethernet will negotiate at USB 2.0 speeds (verified in macOS's USB tab in System Information), regardless of if DP-alt mode is in use (i.e. if there's an HDMI device also plugged in). This results in Ethernet being limited to ~220mbps in practice. Only the USB controller for the Anker's Ethernet port is affected—if I plug in another Ethernet dongle to the Anker's 10gbps USB-C port (Macbook -> Anker hub -> dedicated USB-C to ethernet dongle), that Ethernet dongle receives USB 3.0 speeds and I can get proper gigabit speeds! When connected through a different USB-C dongle (Macbook -> USB-C to HDMI and more USB -> Anker hub), the Anker hub's internal USB controller for Ethernet negotiates USB 3.0 speeds, and I can get full gigabit Ethernet performance from this Anker hub (~940mbps). This of course no longer allows HDMI on the Anker hub because the first dongle is using DP-alt mode for its HDMI, but it seems like if DP-alt mode is even _available_, the Anker's USB controller for Ethernet is limiting itself to 2.0 speeds. While I only verified USB link speeds on Macbooks (via System Information), I found this so strange, as it means I can use this as an all-in-one-hub with slow Ethernet, OR as a data-only hub with full gigabit ethernet speeds. Doing both at once means I need another dongle either connected before or after it. All other ports work great. I wish it had one more USB-C port of any speed. If this was confusing to read, it was even more confusing to figure out, and I now have so many dongles working around this behavior that I have since put this dongle away. I no longer trust Anker to provide all advertised features.

⭐⭐⭐⭐⭐ Sehr praktischer USB-C-Hub. Er ist kompakt, gut verarbeitet und bietet mehrere Anschlüsse, sodass man verschiedene Geräte gleichzeitig anschließen kann. Besonders praktisch finde ich, dass er wenig Platz braucht und sich einfach mitnehmen lässt. Für den Alltag und unterwegs eine sehr gute Lösung. Ich bin zufrieden mit dem Kauf und würde ihn weiterempfehlen.

Dysk podłączony przez usb-c nie jest rozpoznawany w komputerze , monitor podłączony przez usb-c także. Power deliwery nie działa. leci reklamacja.

Works well, feels like good quality - I needed this specific one because apparently it was one of the only ports I could use to hook up a Spyder colour calibration tool to calibrate my external monitor with my macbook pro - anyway it worked and did what I needed.

The Anker 533 is a great hub not only because the usb-a and usb-c ports are 10Gbps which is kinda rare.

Opinión sobre Anker 555 Hub USB-C 8 en 1 Muy buen hub, práctico y de excelente calidad. Tiene todos los puertos que necesito para conectar el MacBook a diferentes dispositivos, además de ofrecer una transferencia de datos rápida y una salida HDMI 4K a 60 Hz. Es compacto, sólido y funciona perfectamente. Muy recomendable para quienes necesitan ampliar las conexiones de su portátil. Solo que se calienta un poco pero es normal por la velocidad