Hourleey Garden Hose Repair Connector with Clamps, Fit for 3/4" or 5/8" Garden Hose Fitting, 4 Set

I was about to throw out my leaking garden hose, but these repair connectors saved the day! The package comes with everything you need—two sets of male and female connectors, sturdy stainless steel clamps, and even extra rubber washers. The aluminum connectors feel high-quality and durable, much better than plastic alternatives. Installation was a breeze! It took just a few minutes to cut off the damaged end of my hose, slide the connector in, and tighten the clamps. No leaks, no hassle—just a perfect fit for my 5/8" hose. I also love that these connectors make it easy to disconnect and reconnect hoses as needed. If you have a damaged garden hose, don’t toss it—fix it! These repair connectors work great and will save you money. Highly recommend!

I bought these to repair a couple garden hoses. The original crimped on ends of the hoses tend to fail but the rest of the hose is still useful. These are a good, sturdy way to fix the hoses without any leakage. The bulk pack is more reasonably priced than anything available at our local stores. I have enough to fix all my hoses and still have a few spares left. If you have an older hose, that has swollen from long use, you might want to buy the 3/4 size.

I would prefer a different clamp for the connectors. The ends stick out on these making it easy to scratch or cut the skin. The female ends are a little loose between the brass pieces. One of them leaked slightly. A thicker washer corrected the problem. Overall they are still a good buy.

Well made and good quality. Easy to use and install

So, I could buy one of these sets at the orange big box store, or get four for the same price right here. Easy decision.I ran over the heavy duty 100 foot hose with the riding mower. I wasn't ready to toss the hose as this is the first season I'm using it. This repair connector kit is what I needed. The quality is ok. Not top of the line, but does the job, and again, the price is right.The clamps are sub-par. Don't think you're going to make it work just using your flathead screwdriver - not happening. Maybe if you have a thin low duty hose the screwdriver will work. However, medium or heavy duty, just go straight for the ratchet. Get out your ratchet set and pull out the 7mm socket - this is what you'll need. The clamp on the male side was ok. However, on the female side, before I could get it tight enough, the clamp stripped. Maybe my heavy duty hose was too much for it to handle? I have better clamps in my tool chest, so I used one of those on the female side, and everything is working fine now - no leaks under full pressure.It got the job done, and saved me the cost of the hose. Good quality hoses are quite expensive these days, so these connectors are a good solution to get more life out of your damaged hose.

Not brass. Feels like aluminum at best. It isn’t magnetic so rust should be minimal on the hose bits. They are good enough at this price. Removing one star because AI summary said brass.Removing another star because the clamps are rubbish. Half mine didn’t even function. The ones that did seem shoddy at best. Do not assume they fit a nut driver either. It is an odd size, with rounded corners, so I had to use a flat head screwdriver…..which is always challenging on hoses. 40 cent clamps at your local hardware store are vastly superior…… so much for saving money.

For the price, what a bargain. I needed to replace the ends of two hoses that had been repaired with the cheap plastic replacement ends. So I was able to replace all four ends on the two hoses with this item. Great threads, easy to screw on and off sprinklers or spray nozzles. I recommend you boil some water, put it in a cup and put the end of the hose you plan to repair into the water to soften up the rubber, then press it onto the new end. And, don't forget to put the hose clamp on before you replace the brass end.

Perfect for getting my garden hoses back into service! Very well made. No burs on the threads so everything goes together well. Hose clamps that come with are actually ones that you can use and not the tin foil type that strip the second you put any torque on them. I've used three of the four so far and no leaks from any of them. They appear to be solid brass so corrosion should be minimal. Great price and fast shipping. Very happy!