Tyger Auto TG-BP6J70078 Tyger FURY Stubby Front Bumper w/Winch Plate Compatible with 2007-2026 Jeep Wrangler JK/JL; 2020-2026 Gladiator | Textured Black

Love the stubby bumper on my JL Wrangler. Super strong bumper with a beautiful finish. Added a Warn winch that mounts perfectly. Took my led fog lights off oem bumper and they mounted easily. Bumper comes with 2 sets of brackets, one "JL" and one for "JK". Has mounts for front license plate. I have bought 2 of these bumpers. One for my JL 2 door and another for my JK 4 door. Definitely recommend this item! 5 stars all day 😀

I have several of the tyger brand products and the finish is done very well, packaging is great. My box it came in was ripped but it had great protection inside. Mounting is fairly easy. Driver side bolts by the vacuum actuator was a little tight but doable with a socket 19mm. The fog lights come with multiple brackets depending the style of your current front bumper. Steel or plastic. Center on the mounting holes for the winch are 10 " : : and 4.5". I placed a smittybilt gen 3 9.5k winch. Smittybilt says minimum 6mm thickness for there winch. Tyger brand states its 5mm thick. I did have to add some grade 8 washers to allow for the mounting bolts to compress the lock washer. The front bolts are hard to get to because the fog light. 16mm or 5/8 box wrench to tighten the smittybilt bolts. Overall I'm very happy with the look of the bumper and install. I have a new set of fog lights on the way and should be rather simple easy to install with access to mount them. I would rather have the winch mount lower to block less airflow. I suppose we will see how well the motor cools.

Bumper fits well. I installed it by myself but would be easier with 2 . It weighs 70 pounds. I installed the factory skid plate by cutting the ends off and redrilling the holes in the plastic skid plate. It looks pretty good

The Tyger FURY Stubby Front Bumper is an absolute unit. Easily the heaviest gauge steel in its price range on Amazon. It doesn’t just look tough—it is. Mounted a winch to it right after install and everything lined up like it should. No cutting, no drilling, just clean fitment. ✅ What I Liked: Thick steel – This bumper’s got real mass to it. No flex, no rattles, just solid. Integrated winch plate – Bolted mine on without a hitch. Everything was squared up. Stubby design = max approach angle – Great for trail clearance and an aggressive stance. ⚠️ What Could Be Better: Takes two people – Install took about 2 hours with two sets of hands. Not hard, just heavy and awkward. Fog light install is annoying – Easily the most time-consuming part. Tight angles and tricky mounting points. 🔧 Install Notes: Have a buddy and a decent set of tools. You’ll want some patience when mounting fogs—do that before bolting the bumper on. Also, bring your own D-rings or recovery setup, because it ships bare. ⭐ Final Verdict: If you're after serious steel, clean lines, and winch-ready simplicity, this bumper delivers. Just don’t expect a quick solo job or extra hardware freebies. It’s barebones—but built right.

Liked: Heavy duty, nice looking, good features. Didn't like: missing Several nuts for mounting the fog lights. Had to run to the hardware store for 4 nuts and back. Wasted almost an hour finding them but was in the middle of the install so didn't want to go through the hassle of waiting for seller to send the missing nuts. Poor design with the fog light mounts making it almost impossible to put the tiny washers, lock washers and nuts on the bolts...barely enough room to stick one finger in some locations while trying to balance the washers and lock washers on your finger tip to slide into the bolt from underneath, then good luck trying to add the nuts without the washer and lock washers falling off in the process , let alone trying to actually tighten them. I know I spent at least 3 hours messing with installing the fog lights, just due to the challenge of trying to attach the nuts and bolts! Same issue with the main bumper lower mounting hardware that holds the bumper to the frame in the jeep. Almost impossible to get the lower mounting bolt part that you insert into the bumper to line up with the insert tab so you can insert the bolt into the pre-welded nut. Then the bolts were almost impossible to insert/thread into those weld mounted nuts ...it was as if they were slighty too small or maybe an incompatible thread inside the nut. I had to force at least two bolts to thread and tighten, and no it wasn't cross threaded. Then once I got these lower bolts almost tight, I had to be careful because it felt like they were stripping when I went to actually tighten them.. only using a regular hand powered rachet tool with reasonable force so they would be secure. It took me about 9 hours split over 2 days to get the stock bumper off and the new Tyger Bumper installed, mostly due to the issues with the mounting hardware. Could have been designed to be more user friendly or maybe redesign the hardware so the customer doesn't have to deal with such rediculous challenges with the tiny hardware and difficult to align main mounting hardware. Side note: in my new 2023 Jeep Gladiator, the stock bumper mounting bolts (8 total) would not break loose, after 30 minutes of trying everything and every tool I own to remove just one nut. luckily I own and air compressor, so I decided to go to Harbor freight and buy a stubby air rachet tool. It made all the difference. I got all 8 nuts off the bumper in less than 10 minutes! Conclusion: great bumper once you manage to get it installed. Definitely inventory all provided hardware before you start! Will save you time and aggravation later. I'm 65 and have multiple disabilities, but I managed to do the install alone, but having a competent helper would be good. Also owning a mechanic creeper with wheels, a battery powered led work light and a good small flashlight are definitely a must. I would have given 5 stars if some of the tiny washers weren't missing., and the if the mounting hardware for the bumper fit better and was easier to mount/align. Mounting hardware and how it is mounted needs redesigned. Its good once you manage to complete the install, but way to frustrating and time consuming.

This bumper is absolutely incredible for the value! It’s super heavy-duty, and the best part? My Jeep factory fog lights fit perfectly in it! While the installation was a bit tricky on my own—definitely recommend having a buddy to help line up the bolts to the front of the frame—once it was on, I was blown away! There's a spot for a winch that I can’t wait to add in the next couple of weeks, plus plenty of room on top of the bull bar for some awesome aftermarket off-road lights. I’m thrilled with this purchase! A+ all the way!

Easy to install, sturdy and looks great.

Great fit and nice quality materials.

By far the best bumper in this price range, specially when its on sale

Easy instructions.Need two person when putting the bumpee on the truck because you need to align the bolts.Other than that kinda easy.Seems sturdy.Bolts are long enough so it screws easily.

Installation quand même facile , le plus long son l'installation des petits lumière ahaha . Bon qualité ! 5/5

Bumper is solid and easy to install except for the headlights and tiny little screws provided. After dicking around for an hour or two trying to get the fog lights in with tiny screws, I decided to use my own hardware and got them in within minutes. The bumper is a bit challenging but I managed on my own in just a few minutes.

Couldn't be better for the price I paid. It's 4 lights 4inch you probably can fit 6 4 inch. Only down side is the skid plate they sell for that bumper the fitment is weird between the fream... and also under the bumper they drilled hold under the bull bar. I removed the plug sprayed ton of antitrust put the plug back and rolled the bumper couple time should do the job!