Siraya Tech Fast ABS-Like 3D Printer Resin 405nm UV-Curing Non-Brittle High Precision 3D Printing Liquid Standard Photopolymer Resin for LCD DLP 3D Printing(Grey, 1kg)

After trying a few other resins I honestly can never go back. Sirya tech fast has half the oudur which is great for a not fully sealed printing room. The quality and strength is unmatched with even thin bits of models being strong but not too brittle. And faliure rate by far the best feature for me is very low compared to other resins. Its not quite as fast as advertised but it still lets you reduce exposure about 40% on average. The cost is also only slightly higher then the competition. Easy to work with Great quality prints Low smell Low faliure rate Fast prints I wont be buying a diffrent resin for mini printing unless somthing new and incredible is realesed.

Head and shoulders above Elegoo resins on my ageing Mars. Little smell, no print failures, less damage when removing supports, cures much faster. This stuff is amazing.

Bought for my son, who is only using this in his 3D printer now. He’s very pleased with the results and has recommended this to his friends

This is my favorite resin i've tried so far. Prints very cleanly and is alot less fragile then some other the other resins I've tried. Its also cheaper (per kg) than the other resins i've tried too.

Fantastic resin at a third of the cost of my usual brand, runs beautifully on my phrozen shuffle and shuffle xl at 9 seconds per layer (less than the curing time sheet says for these printers) I am running this resin for my business as I know I can rely on it. Very low-viscosity which makes cleaning easy too!

very happy works well made very smooth prints

This is my go to 3D printer resin. Good quality and a pleasure to use.

ABS-like grey Pros: - affordable - let's you print faster Cons: - as brittle as standard resin - very hard to clean comparing to other brands; if not done properly residue will obscure details I was hoping this will replace my Elegoo ABS like resin. Unfortunately it's not for me. Yes you can print about 25% faster (lift/retraction speeds and exposure time) but there are issues that are hard to overcome. The prints are brittle comparing to other ABS like resins to the point where it shouldn't be called like that. Then cleaning - 10min in my wash station was not enough to clean the prints properly vs other resins 5min and no issues. Good idea, I will keep a bottle as I can see myself using it for bigger models with no fragile parts, but this resin is not good for standard 28mm scale miniatures.

I'm in the middle of an engineering project (basically a custom RC plane), and needed some small, precise parts that still need to take decently significant loads. Of course print quality and resolution is a more a matter of what printer you have, but I can say this stuff printed fantastically on my Photon Mono S with the settings recommended by Siraya Tech (you can find a spreadsheet on their website). The parts that I got are incredibly strong. I know this is an ABS-like filament, but I've legitimately gotten better performance out of these than actual ABS from an FDM printer. That is most likely because printing orientation does not matter nearly as much, so the parts turn out mostly isotropic (equal strength in all directions). I'll describe some of the cases I used this for below. MY USE CASES: One of the parts was a stepper motor gear (28BYJ-48) that needed to deal with up to 0.1N*m of torque. I can tell after a lot of use, the section that meshes with the stepper pin has worn down from perfectly tight, to having maybe 3-5 degrees of slack, but it's still perfectly usable. Many of the parts require linkages between them, so I printed 5mm pins. In my case, I had to reduce the size of the pins to about 95% to avoid clearance issues, but once they were in place the pins had very little friction while still providing very tight joints. Additionally, those pins could handle a surprising amount of shear force. I tested with a 5kg weight, so statically that's about 2.5MPa, but I also drop tested with that rig, so it could have easily reached 25MPa at one point. CLEANING: Specifically regarding this resin, you have to empty and clean your vat within 2 days if you don't plan on printing again. This stuff will separate into layers in about that time and becomes harder to clean off the vat. Also, water curing has yielded good results for me. If you've never resin printed before this part is for you, otherwise move along: Cleaning the prints is quite a hassle. They come out coated in liquid uncured resin which is, in the case of this resin, definitely a nasty skin irritant and potentially toxic if ingested (most resins are). You'll need LOTS of isopropyl or denatured alcohol, at least like 2 or 3 tubs or large tupperware containers, lots of paper towels, definitely more gloves than your printer comes with, and some way to get rid of the fumes. The alcohol is smelly enough, but this resin is definitely nasty stuff to be around. You have to be very careful not to get it on your skin or other surfaces (as it is quite drippy off the printer). With this resin, I got the best results by cleaning with alcohol from a spray bottle, then rinsing in water for 30 seconds, and then submerging in a cleaner tub of water before leaving in the sun (for 45 minutes) or shining with a bright UV light (1 minute or more, flipping the part with tweezers). I tend to keep one tupperware container for the alcohol cleaning process, which is very thick with uncured resin, one container for dirty rinse water, and one for clean water (and a bonus extra container to place all my contaminated tools and paper towels). I can usually run with this setup for several prints without changing out the liquids, which is nice because you CANNOT wash this stuff down the drain (unless you want even more micro-plastics in the ocean), and it absolutely has to be cured before you dispose of it. I typically save my 2-liter bottles and old mouthwash bottles, dump everything into those, and leave them out in the sun for a day before putting in the trash. CONCLUSION: If you can deal with the hassle of cleaning and PROPERLY discarding of the waste, then this resin produces results that you simply cannot get with other printing methods. Sure, FDM printing is less toxic and usually easier to get larger prints with, but the precision and speed of resin printing is unmatched. Usually that comes at the cost of poor physical proteries, but with this resin, you can get really small, precise parts with fantastic physical properties.

Zeker een aanrader en snel geleverd

Heb al een aantal resins van verschillende producenten gebruikt, maar toch kom ik steeds terug naar de Siraya Tech Fast Resin. Deze resin geeft voor mij de beste resultaten en minste rommel. Steeds tevreden van de kwaliteit.

Jättebra Resin. Har noll misslyckade utskrifter med denna (utom när resinet tog slut). Det som är extra bra är att man kan ladda hem de korrekta inställningarna till sin skrivare från deras hemsida. Enda nackdelen är att de inte säljer 5kg-förpackningen hos Amazon. Snälla den vill vi ha här (till ett bra pris).

Perfect