Taller Dual Monitor Stand Long Arms for 13 to 32 inch Screens, Monitor Arm Desk Mount with Tilt Swivel Rotation, Height Adjustable Gaming Monitor Arm, Load Capacity 9kg, VESA 75 & 100 mm

Very happy with this item , I have 32 + 28 inch monitors on it and it is not stressed at all.. It is easy to set up and adjust / balance to each monitors weight so I can move the monitors with no problems at all.. This is very sturdy + strong , it looks good but is also small and descrete and I have full motion if I move my monitors around.. 100% Value for money + 100% recommended ..

My setup: 27 inch Monitor in landscape mode & 21.5inch monitor in portrait mode. As you can see from the image, my space restrictions are quite challenging. Ideally would prefer portrait monitor on right but that is never going to happen, thanks to my house and roof design! And the desk has to be flush with the wall. I wanted dual arms on a post mount vs dual arms on a desk clamp as the single post mount is visually neater under the monitors considering the height, I wanted the monitors set to. This also has great geometry advantages. The arms are gas powered height adjustable but also once I've nailed in the angles and depth of the arms for each monitor relative to each other I can then use the individual arms height position on the post mount to get even more flexibility on how I have my monitors set up. For example the portrait monitor on left I can have it either top or bottom aligned with my landscape 27 inch without affecting depth of the monitors from me or to back wall. Because my desk has to be flush against the wall I can't have the monitor arms protruding behind the clamp. I have minimal space between the wall and back of monitor (13cm): Leaving me with most of my 60cm depth of desk to use without feeling cramped or the monitors right up in my face. My monitors are bottom aligned and have 27cm height off the desk surface. I still have 13cm downward adjustment on the post mount and 21cm upward height adjustment available on the post mount (and that is not even taking into account the further adjustability of the gas arms A lot of peoples concerns with these gas arm mounts is the space required behind the clamp to get the monitors at a reasonable distance from their seated positions. So I am providing this information in case this is of help to you. I am incredibly pleased with this design. There is no wobble in use. the arms are very sturdy and stable the gas arms hold each monitor solidly exactly where I place them. The seller Huanuo is also incredible to deal with, very communicative and the way they have responded to me shows they have total confidence in their product and really value their customer even after the sale. On the unit I received I had an issue with the tilt pivot on my unit. I contacted them directly regarding this. After exchanging emails about what could be causing the issue and remedies, they suggested sending me a replacement unit which arrived within a few days of our communication. One of the most outstanding examples of customer service I have experienced from an Amazon seller in recent times. I highly recommend them and their products just based on the fact that you know there is someone there to support you after the sale if you have any need. As well as the fact that it is a solid dependable product at a good value.

Overall i would state that the all round quality of this product is good and about standard to good for the price - if your worrying about the right mount for a duel panel system just go for this one as long as each panel is less than 8kg. Detailed notes Cable management: i would describe the cable management as sufficient for most if not all the only potential for issue will come from the wires you choose to use in connection to it as wires that are too short or are needlessly huge will bend the wire management framework provided under the arms. Fit: i cannot think of a way to fault it for this that is not in the hands of the consumer but none the less before buying this product i would recommend reviewing its practicality on your setup you will need *in most cases at least a small space behind your desk to ensure the clamps bracket can be secured also note that you will likely need to offset the base on your desk to one of the sides to ensure the smallest space between the wall and your monitor panel due to the arms space requirements Strength: the main points of interest will monitor arms are the pistons base and arms in this case after testing i can say they are all of a good quality with most components being of metal construction in addition to using a good piston *note although adjustable i would recommend slightly heavier monitors for this piston due to its strength Installation: modular clear thats all *note the actual difficulty of assembly is in relation to putting the actual monitor on the stack i would recommend putting the base plate and arm on the monitor and then lifting it up onto the stack

Perfect. You cannot got wrong with double display. I tried serval others before this product. I am so happy I stayed with this brand. Really happy with this monitor stand. Easy to set up which a huge bonus. Very sturdy, definitely value for money and great functionality. Cable management is a huge game changer, very strong and sturdy

works well with 34inch and 27 inch monitor. Easy to assemble. useful to manage space constraint in a small table with multiple monitors. the whole setup looks sturdy and arms hold position well and are quite flexible and adjustible for your desired setup.

A great stand, my first gas arm stand and I'm impressed. It's super solid and was really easy to install. I had 60mm grommet holes and was disappointed to see the plate provided was as small as it is (silver one in the photo). I had an old plate lying around (black plate) so I used that instead. The top fit over the hole fine though and has a space for cables to come through which was nice. I ideally wanted my monitors positioned further back but was unable to due to how the arms articulate. It's not a huge problem as I have a 900mm deep desk but any smaller and I'd be sat too close. Overall a really nice mount and a nice combination of pole and gas which looks neater and still offers the movement.

Good quality stand. Robust and easy to assemble. Use it to hold a 28 inch monitor and a 17 inch and have no problems at all.

Ready to assemble. Very sturdy. Using with a 34” curved plus 24” in portrait mode. Screens stay put where you set them once you adjust the tension.

Mükemmel, sadece alın. Masamda yer açıldı. Görseller ile mükemmelliğini destekliyorum. Detaylı yorumlara görsellerden ulaşabilirsiniz, detaylı bir kurulum videosu hazırladım.

انا طلبت المنتج على اساس يحمل شاشة ٣٢ بحسب ما مذكور في تفاصيل المنتج ووصلني اقصى حاجة يحملها ٢٧ بوصة

J'ai acheté ce support d'écran pour deux écrans de 28 pouces pour un bureau gamer il s'adapte parfaitement parfait que demander de plus je recommande

Excellent product