Tangkula16-Inch Metal Pedestal Fan, Industrial Metal Standing Fan with Adjustable Height, 3 Speeds, 75° Oscillation & 20° Head Tilt, Floor Fan with Weighted Base for Living Room Bedroom Office

My husband groaned that it needed assembly but my teen daughter put it together. She was invested in this because she has allergies and asthma, so her bedroom fan needs to be able to be cleaned. after performance, the ability to clean it is important.The blades are metal and the front cage *clips on* so there is no tool required to remove the cage cover and wipe it down.The fan has an industrial look but does not look out of place in her room. It takes up only a small footprint and the oscillation is great. The fan has the standard adjustable 3 wind flow speeds and there is no additional sounds at the higher speeds. It sounds like a fan - a white noise machine but certainly not too loud in my opinion. The oscillation is adjustable and has a much wider area than most fans.The 18 inch diameter, backed with a good motor, moves a lot of air. I am using it in my daughters bedroom but it would be fine for larger areas. The height is easy to adjust as well and the base has enough weight to stay in place.

The media could not be loaded. This Tankgula all metal 16” fan is incredible sturdy and well built, industrial grade and excellent quality, not your typical plastic fan.The height of the fan pole can be easily adjusted, from 34.5” to 48.5”, the electrical cord is 71” long, has 3 fan speeds low, medium and high, the oscillation is very wide compared to other fans we have had.Easy to assemble, took my husband 10 minutes to do it, the instructions were very clear, quality parts, professional look. This is not a lightweight, cheap plastic fan.Thanks to the heavy weight base that it has, it will not tipped over easily, is easy to clean to, we can move it from room to room and adjust the height accordingly and after finish the job, take it home and use it there, so is very versatile and it will be good for many years to come.We bought it for my husband, he is doing mud and tape, so this fan will help dry the walls faster, since this fan is strong and has a industrial motor, 4 metal blades, that put out some amazing air flow.Overall great heavy duty fan, useful for many areas and applications. I would recommend it.

This fan was somewhat easy to put together. It was assembled in the under 5 minutes. It's quiet enough not to interrupt watching TV. It cools off my living room quite nicely by 3-4 degrees. This is an excellent quality fan.

Right out of box oscillation did not work. The next day it would not power up and was completely dead.

Solid, nice metal fan. Quiet.

Fan has very good airflow, but stopped working after a month of regular use. Contacted seller, and the unit was promptly replaced without needing to return the defective fan. Satisfactory customer support.

It’s perfect and gets a very beautiful air. Easy to assemble it and it’s great item. I give five thumbs up. 👍🏼👍🏼👍🏼👍🏼👍🏼❤️❤️👍🏼

I am so happy with this purchase,the fan is made of metal,it’s so heavy,which is safe and stable than plastic one. Good size fan. And good speed. Selection. Easy to install.

Je suis très satisfaite de mon ventilateur. Jusqu' à maintenant il n'y a que les ventilateurs au salon de bronzage qui peuvent dépasser son débit d air. J espère le posséder longtemps. Je recommande cet achat. Je n ai pas eu de difficulté à l'assembler.

So far I can’t complain about this fan, except it did take me some time to put it together. I don’t recall how long, but long enough for me to have to take a break and then return to finish the set up. I’m happy with the materials it’s made from, very heavy stable fan. I like that it’s metal, since on humid days it still pumps out good air. I would say that this fan is quite but it’s not super loud either. It creates good white noise at night and I normally run it on speed 1 and I’m able to sleep through the night. The higher the speed the louder it is. I also like the way it looks in my space, doesn’t take away from the aesthetics.

The media could not be loaded. Complètement découragée! Ça fait 30 ans que j’ai des ventilateurs à la maison, que je les montent et ça ma toujours pris environ 5 minutes! Elle…. Ça ma pris 1h!!!!!! OUI 1 HEURE!!!1- il a un bout qui n’es pas soudé sur l’une des secoupes.2- la vise qui relis la secoupe au moteur ne s’aligne pas avec le trou, donc très dure à viser et finalement elle vise TRÈS croche!3- il manque un bout à la vise (tarot) qui retient les deux secoupes ensemble, donc impossible de les insérer ensemble pour que les secoupes ne bougent plus!4- j’espère que vous êtes fort car c’est la que ça ce corse! Faut sortir nos gros muscles… la vise est trop courte pour s’aligner avec l’extérieur qui s’agence avec l’un des gros embout noir! (La grosse vise qui passe barre en barre du pied) J’en ai eu des sueurs à force que j’ai forcée pour les rentrer l’un dans l’autre!! Faut avoir des bons doigts car j’en avais des marques sur les doigts à force que j’ai essayé de serrer! J’ai réussi mais ça tient VRAIMENT par « parure » donc résultat, le ventilateur ballotte d’en avant d’en arrière!5- pour un ventilateur avec des palmes en métal, je pensais que ça pousserait beaucoup plus fort mais ce ventilateur ne vaut meme pas 40$ à mon avis! Même à 40$ il y a des ventilateurs en plastique qui sont BEAUCOUP plus facile à installer et qui poussent BEAUCOUP plus de vent!J’ai effectivement demandé un remboursement dès la fin de l’installation car évidemment je suis très déçu! La livraison à été très longue et lorsque je l’ai reçu (ENFIN) j’avais hate de la monter mais je me suis rendu compte assez vite que ce ventilateur ne valait pas son 150$ (avec shipping)J’dis ça j’dit rien mais honnêtement ne perdez pas votre temps avec ce ventilateur TRES bas de gamme!D’ailleurs, les palmés sont très minces, donc je ne crois pas qu’elles résisteront longtemps! Très facile de « crochir »Ça fait longtemps que j’achète chez Amazon et j’ai toujours été très satisfaite mais là c’est l’boutte du boutte! C’est peut-être mon troisième retour depuis toutes ses années, mes commentaires on toujours été relativement très positif mais là sérieusement je ne recommande pas dutout!Voyez par vous même avec les photos et la vidéo!Point positif: La communication avec le vendeur était parfait! Il m’ont donner plusieurs options de remboursement/retour! Vendeur très compréhensif!

tres bien

Okay, this fan has some obvious flaws. The design and construction of the neck (where the head needs to pivot to tilt the fan up and down) is seriously flawed. The whole fan is metal (awesome!) with the exception of a few knobs and an inner cap on the neck. That inner cap makes it impossible to set the fan’s face in any position but straight ahead (not tilted), and have it stay there. So, my fan’s face will always be in a level position, wether I want it to or not.Also, the height adjustment got immediately stuck in one position and the jaws of life cannot seem to loosen it! So, my fan is permanently no taller than my own waist (44”). Is that the tallest or gets? I have no idea. It’s not tall, is the point.Also, while the photos in the listing show a simple stainless steel plate in the centre of the fan face, mine has “costway” stamped on it in black letters. I’ll be covering that up as soon as possible.HOWEVER. This fan BLOWS WIND. It’s powerful, even on the lowest of three speeds. Even at the height and without tilting the face, I am getting ample wind in my space. It feels glorious! Best fan I’ve ever owned in that regard.- It’s almost completely metal, which I love.- It’s powerful, which is what you need out of a fan (WIND. Not breeze or draft. Wind!).- It’s sturdy - the base is solid, weighted, and smaller than the fan face.- I’m happy to forgive all the cons listed, based on these three pros!