Armor AR350 Low Gloss Wet Look Concrete Sealer 1 Gallon - Professional Grade Color Enhancing Solvent Based Acrylic Sealer for Exterior Concrete and Pavers - 700 VOC

This sealer worked great for us. It is definitely waterproof and hopefully will make snow/ice removal easier. The coverage was as expected, and I purchased the low gloss so the slight shine looks great. It really makes the paver block colors stand out better. It says on the bottle that it is not made to prevent ants from coming through the cracks, but it's been 3 weeks now and I haven't had any more problems with them. This stuff has an extreme chemical, so make sure you use a good quality respirator. So glad I went with this product.

Transformed My Pool Area with a Deep Wet Look Finish I used the Armor AR350 Low Gloss Wet Look Concrete Sealer on the slate rock around my pool and it completely changed the look for the better. I originally wanted black rock, but it was almost three times the price of the gray slate. After applying this sealer, the rock now has a wet, dark sheen that makes it look black, which is exactly what I wanted. It spreads easily using a handheld sprayer and gives a smooth, even finish with a nice low gloss that makes everything look clean and modern. The coverage was great and it really brought the color of the stone to life. The only drawback is the strong VOC odor. Even outdoors, it is pretty intense for about an hour after spraying. I definitely would not recommend using it indoors without proper ventilation and a respirator mask. Other than that, this product is fantastic. I am very happy with how it turned out and plan to use it on my marble pavers around the pool next. I will see how well it holds up over the next year, but for now I could not be happier with the look and finish. Highly recommend.

I used a 3/8” nap roller on new stamped concrete. Easy to apply however the deeper stamped lines do need to be touched up for coverage. 1/2” nap roller would have worked better. It creates a dramatic improvement in the appearance of the stamped walkway. Very happy with the appearance after only one coat. Expect the walkway to look even better after my second coat. Time will tell about its staining resistance.

Great product that easy to apply and lasts for years. Did my garage floor in it with a medium gray tint pack. Took 5 gallons for 000 sq ft garage. Did a lot of prep work 5 years ago. Removed oil stains and did etch clean. It was a little too hot so did get some bubbles. Five years later I’m redoing the gray and removed a rubber mat that bonded to the sealer and had to use air scraper to get it off. After hours of sanding I decided to leave some of the original gray for a mottled look. Then put the clear 350 over it. Looks great. Did recoat the sides. I found that it will last for many years using a mop on wax finish. Learned not to put rubber mats on it however.

I have gone through gallons of this stuff and it is just the best you can get IMO. In the past I've mostly used big box store products that are water based. They don't come close. I have stained two large patios, most recently with Vivid acid stain (also an excellent product). This is the only sealer I would use on top of it. The coverage numbers are accurate, easy to apply with a 3/8 inch nap roller. It does water spot a little, and is slippery when wet, but we have a spa on the patio and it's not much of an issue. I just rinse it and run a mop over it once in a while. I do feel it’s a good value for the money because I've not found another product that is anywhere near as good.

Great installation instructions. Product went on exactly as directions said if you followed them. You must follow these instructions if you desire peek product performance. Surface was properly prepped. Used a 6" roller and it went on well. In 24 hours it was dry and coat 2 went on. The shine looks great. Early results show water beading up. Too early to say how long it will last. Will update review later as time passes. Coverage amount was consistent with what instructions said in terms of how much to use. First coat my concrete was dry and soaked up coat one. You need two applications to get the needed protection. So far much happier than using a water based product which I had done years ago. Crossing my fingers it holds up longer term than water based product.