Mcbazel 18 in 1 Replacement Repair Kit for NS Switch Joy-Con with Screwdrivers Opening Tool, 3D Left Right Analog Joysticks, Buckle Lock, Charging Port Slider, Button Sync Flex Cable Set

I got this kit to fix the joystick and SL/SR strip on my left Joy-Con, and it worked perfectly! The whole process took me about an hour, and once I finished, my Joy-Con felt as good as new. Also, YOU DON’T NEED TO REMOVE THE BATTERY FROM THE BOARD! There’s a risk of ripping the connector, so just slide the battery off to the side, and you’re good to go. If you’re replacing the joystick, don’t forget to calibrate it in the settings afterward to make sure it works properly. The tools included are decent, and the repair isn’t too difficult, but you’ll need a bit of patience, a steady hand, and make sure to use the tweezers for the small parts. I also appreciate that the kit includes other parts, like replacement locks, which will definitely come in handy if I need to make more repairs down the line. Overall, this kit is awesome for fixing up Joy-Cons without spending a fortune (saved me £60!). If you’re into a bit of DIY, this is totally worth it!

Really nice. Managed to replace the joystick using a tutorial from YouTube. The included tools were good enough. No issues whatsoever

This is an early review, I just fitted the replacement charging port and the replacement joycon onto two different controllers. They have both immediately started working again - hopefully I won't experience drift in future, however bear in mind that many people have reported the controller starting to drift again after fitting; the charging port is very good, if your controller is not connecting to the main body/not charging then this is the kit to replace them with! Whole thing a little finickity but overall I would rate a solid 4.5!

This is only about twice the cost of the already cheap stick kit, that just includes the 2 replacement sticks. With everything this includes, it's an absolute bargain and essentially allows you to rebuild 2 Joy-Cons. One of the sticks on my sons Joy-Con was a little crunchy. So I thought, 'whilst I'm in there'... This will be the second time they sticks have been replaced and the third time for the shoulder button boards. The kit is inclusive, including having 2 metal lock tabs, which I never would have thought to have replaced. The screwdrivers included are better quality than those I bought in a specific Joy-Con screwdriver kit, at probably the same cost as this entire kit. All parts fitted like the original parts did. I expect similar longevity to the other parts I've replaced but, as long as they last long enough for when the Switch 2 is released, that will be enough.

Amazing, I bought this kit and watched a super easy to follow YouTube video and I was able to repair three sets of Nintendo joycons with stick drift for my kids switch consoles. Saved me from buying new controllers for £80+ each.

Everything you need to replace the parts. When replacing the slide locking mechanism, make sure you remove the 'light diffuser/holder from the original bar and put on the new one. No instructions but it's straight forward and there are plenty of YouTube videos.

All parts work, absolutely no problem. The tweezers aren't the best however but that's ok

Well this came well packaged with all the tools and parts necessary for replacement. Everything went well with a great little video which helped as well. Replaced both stick controllers without a hitch. A week of use and both sticks have terrible drift. I’d say every 5-10 inputs in Minecraft either the view starts to rotate or the character just slowly wonders off on its own. Wasted money - now hope another manufacturer stick replacement set will do the job for another £15 or just put money towards a new genuine set of controllers. Lasted a week but otherwise in terms of other aspects the rubber covers etc all seems fine and relatively robust. Shame.

Perfecto

Fast delivery, all parts as promised.

I had enquired joystick replacements in Dubai and was quoted 200aed per Joycon set. Then I found this amazing DIY joycon repair kit for just 50aed and was worth it. The product has a QR code with YouTube video link and user manual and is quite self-explanatory.

Achat pour réparer un joycon drift et la synchronisation du joycon/ bouton SL&SR/ led vertes de mon joycon gauche. La réparation est relativement simple. J’ai utilisé un tutoriel YouTube d’ifixit. Les joysticks sont similaires à ceux d’origine donc c’est ok. Celui remplacé fonctionne bien après un essai (à voir dans le temps). Concernant la platine pour la synchronisation, celle fourni paraît un peu fragile par rapport à celle d’origine mais fonctionne parfaitement après remontage. Je n’ai pas l’utilité pour le moment des glissières et des blocages métalliques donc pas d’avis là dessus. L’outillage est plutôt bon et est impeccable pour la réparation (tournevis aimantés). Je recommande pour le moment. Édit: après plusieurs semaines d’utilisation, le revêtement du joystick devient « brillant » et tourne sur lui même (voir photo: gauche joystick après plusieurs utilisation, droite joycon tout juste remplacé). Cela dit, le joycon drift n’est pas réapparu pour le moment. La nappe pour les boutons SL et SR fonctionne toujours. Je ne change pas la note.

good product