FEL-PRO 61106 Exhaust Pipe Flange Gasket for Toyota Corolla

After 200,000 miles the OEM version of this gasket disintegrated from normal wear and tear over the last 17 years. This Fel-Pro part # 61106 is an exact replacement for the exhaust gasket that is held together by the twin bolts with springs - joint between the Y-pipe and catalytic converter. Toyota exhaust diagram has the OEM part # as 17451-0D020. Failure symptoms were slight exhaust leak from the failed gasket and an annoying exhaust system rattle at idle that was not a rattling heat shield. I took a chance this gasket would work and it fit perfect. Note - make sure all of the old gasket is completely removed - mine was in a bazillion pieces with one piece stuck to the top of the pipe that i could not see but could feel and I could not scrape off. Had to use a very thin metal file and filed it away. Did not take long since the gasket material is made of some soft metal. Used my foot to push back on the muffler which opened the joint gap about 1.5 inches to get the new gasket installed. Gasket fit perfect on the pipe, flanges came together and seated the gasket, installed the bolts/springs. No more exhaust leak and the annoying exhaust system rattle at idle is gone.

Perfect fit on my 2010 subaru legacy. Installed invidia catback exhaust and needed a new donut gasket due to the old one being too rusty and causing exhaust leak. Installed this donut gasket along with new invidia catback exhaust and it fit perfectly with no issues and no exhaust leak.

Knocked off the stock ring and all the rust off the pipe (Ohio winters baby) wire brushed it, covered it in red gasket sealer then tapped on this one with a wood block and bolted it up. Been going strong for a few weeks now.

This fit the 2015 Outlander Sport 2.0L, outlet of manifold/cat assembly. Normally prefer Mahle or Bosal, they have more wire mesh beneath the graphite, but this arrived fastest and sealing fine.May also need new spring bolt kit, originals were rotted out.https://www.amazon.com/gp/product/B09Q6F666C/

Received one day after ordering, and I got the right part! Great quality that was the same size and shape of the OEM exhaust gasket that came off my 2012 CT200h.

These rings fit perfectly on my exhaust

This is some cheap poorly made mystery medal. Don't put this on your vehicle it will never seal properly. Fel pro has went cheap also. Ordered a fel pro valve cover gasket and it was very cheap as well and did not fit properly either. Fel pro used to be a reputable brand. But not anymore. But in there defense seems like all the aftermarket parts are thos way. So only other option is go oem and pay al least twice as much but at least it will be done right.

Easy to install. low price.