RealTruck BAK BAKFlip G2 Hard Folding Truck Bed Tonneau Cover | 226701 | Fits 2020-2025 Jeep Gladiator 5' Bed (60.3")

Perfect fit on our Gladiator 2021. Quality good.

This was the cover chosen for a 2024 Jeep Gladiator Mojave X. The reason for the 4 stars is two-fold. The cover is quite expensive, and in this instance, the package was 2 washers short. There are always spare parts laying around the shop so this wasn't a big deal.This is the cover that was overwhelmingly praised by enthusiasts who have had the cover and many compared it to others they've owned and this one seemed to be far and away the most popular option. That's why it was chosen, even with the price point.For the price, it would have been nice to have spare bolts/washers/etc. included in the package. Some of the parts are pretty specialized and would have been hard to find replacements for.Pros: The installation was easier than expected. Go to the company's website and they have videos on how to install the cover on various trucks. After watching this, it was pretty simple. The printed instructions were decent as well, much better than some of the reviews I've seen. The cover seems to be a quality product but time will tell for sure. Have not yet had a rain storm or car wash to test the cover in. It rolls up easily and seems very secure when in place with the tailgate up. It is also quite manageable if you install it with just one person. Perhaps with a larger truck/cover, you may need a second.Cons: Price. The cover is about 50% more expensive than comparable covers. The QA missed a couple of parts but it wasn't a big deal in this case. Still, something to mention.

The installation instructions and description of the hardware is greatly lacking as others have said. You would think that after years of the same complaints, they would fix this issue. Also there is so much hardware you do not need that until you figure it out or watch youtube you are kind of loss. After you have the hardware figured out it fairly easy provided you have the right tools that are not included.

Easy to install and use.

This product looks great installed and is fairly easy to install But is extremely cheap built product with an extremely premium price, I don’t see this lasting even on a second vehicle. I would not recommend.

For some reason, the 1* review I gave the incorrect delivery at first, is overwriting the 4* review I gave the correct delivery.The first order, the incorrect items were delivered but that was resolved/fully refunded and the correct order received with only a few days delay in work.The correct cover fitted very well and looks good on my 2023 Gladiator and is worth the money. It appears robust, secure and versatile!Other reviewers have noted that the instructions are misleading. I consider myself pretty good with the tools but would describe these instructions as unclear and you really have to sit inside the bed of the truck before you start and read the instructions several times with the various parts in your hands to visualize how they go together, because in view that this kit is provisioned for several different model years of Gladiator with different fixing holes in the bed, there is a "Choice A" and a "Choice B" for the methods of attaching the side rails and you must choose the right method for your Glad.I agree with the comment about the lower forward screw/rubber thingy. It is really only an aid to location during assembly. That "wierd" expanding bolt has to be hammered through the top hole and EXPANDED and then the screw removed again before you can fit the side rail. If you don't do that, the forward end of the rails will not be anchored correctly.The comments that the rails don't sit level and droop down is correct AT FIRST. Once you attach the forward most panel with the large thumbwheels, that pulls everything level and as long as the rear TORX screws are well tightened, alignment is assured. On that note - WHY TORX SCREWS??? Why not a hex bolt with lock washer that I can get a small ratchet on? I found that lying on my back trying to engage those screws under the rim of the bed to be uncomfortable, fiddly and slower than needful.If you are likely to drive round much with the cover removed COMPLETELY, it would be possible to go to Home Depot and pick up 6 feet of Aluminum angle section, paint it to suit the bed color, drill and bolt the angle to the forward flat brackets across the bed to hold the side rails level that way but not many people would feel the need to go that far, I think!One small issue that prevented me giving the cover a 5* is that one of the parts for the strap tiedown was left out of the package but I had a suitable screw and anchor in my "left over parts from other projects" drawer in my garage and so only a few minutes delay was experienced in fitting the cover assembly to the vehicle. NEVER throw excess parts away!I find that these days, a lot of manufacturers will add an extra part of each kind to the package of parts to ensure that if one part count is miscounted low, it doesn't matter but this maker aims to provide the correct number but if one small item is left out, then you are short and dependent on your "left over parts" drawer. That's a manufacturers choice to save a few cents but risks reputation if they get it wrong!!!!Note that if you cant find a small screw in the tie down strap buckle bag, look inside the buckle and I found one was "hiding" in there and prized it out with a screwdriver.

I did a lot of research on tonneau covers for my 2021 Jeep Gladiator before purchasing this one. I kept coming back to the Bak X4s because of the security features, especially the rail long locking mechanism that secures both sides of the entire cover and not just the end at the tailgate.The install was a little tricky, but, at the end of the day it was 12 bolts in total. I have a spray in bed liner and needed to remove some of it to allow for a proper install.The cover is pretty much watertight at the bulkhead and sides, but the tailgate closure leaves a small gap above the tailgate itself. We've had a ton of rain over the last two weeks and only a little got in at the back end of the bed.Overall this cover looks great and functions very well!

Easy install and perfect fit. Rolls up nicely and doesn’t block your view out of rear window. Highly recommend.

Really nice fit, looks great on my Jeep gladiator, fairly easy to install and easy to use. 👍👍