Nilight - JK-61A 2" inch Rear Bumper Tow Trailer Hitch Receiver Kit, Compatible for 2007-2018 Jeep Wrangler JK 4 Door & 2 Unlimited, w/4-Pin Wiring Harness (Exclude JL Models)

Fit and finish is very good and seems like it will be durable -- better than expected! The wiring harness is easy to use & plenty long to allow for routing. They provide multiple tie-downs to make the wiring secure and provide a factory look. Install was easy for one person. The only negative is that the installation instructions are just snapshots from the video on this Amazon listing, but neither tells you how to remove the bumper, and neither provides wrench sizes or torque specs. INSTALL TIPS: 1. The video shows the bumper removed, but doesn't tell you how. It's easy as there are only eight 15mm bolts. It does help to have both long and short 15mm sockets. Do a DuckDuckGo search for a video showing the bumper removal so you can see where the bolts are. Once unbolted, the bumper is lightweight plastic and easy to handle. 2. The spare does NOT need to be removed as shown in some videos online. Just open the door all the way. 3. I used a 19mm socket and Crescent wrench for the new hitch bolts. They are super easy to get to with the bumper off. Unfortunately, the video doesn't give any torque specs. The hitch squeezes against the frame as you tighten. Start at one end, then tighten all four in sequence so it doesn't warp or bow in the middle. Then re-tighten all four again because the first ones you tightened will have loosened a bit as the others took up the pressure. Even a 3rd tightness check wouldn't hurt just for security. 4. Pay attention as you remove the left taillight because there are two types of screws. The two closest to the tailgate are pointed sheet metal screws that actually hold the unit on. The outboard screws are coarser to fit into the plastic positioning molding.

Installation was exactly as expected. Remove the plastic bumper cover (6 bolts) install the Nilght hitch receiver as the instructions lay out. No torque specs are provided, so tighten those 8.8 bolts until everything stops moving together. The provided wiring harness clips right in and keeps the wiring super simple. The only criticism I have is the flimsy wiring zip ties. They hold the cable, but don't stay in any of the holes in the factory bumper structure. Overall, I think this is a great product and value. I'll update as at start hauling our trailer with it.

Worked great!! Easy install for the hitch and wiring harness. And for $40!!!

Looks well made, has a nice finish and included everything to mount. This is not an easy install without removing the rear bumper. Everything fits great but their is very little room between the receiver and the bumper. It is very hard to get the flat washer, lock washer and nut started on the bolt with only about 1/2" of space. I used small needle nosed vice grips and even that was difficult but doable with a few choice words.

Came with all the necessary hardware and was overall pretty easy to install with the right tools and not needing to remove the bumper for access. Seems to be pretty sturdy and functional for most lighter-duty tasks. It also included the harness for the rail lights/4-way flat trailer plug! I forgot it came with that so that was great to see as well. It’s a nice fit and aligns nicely with the center of the Jeep. Overall a good value for the money! The light plug could be just a little better quality and a weight rating stamped or labeled on the unit itself would be nice just to quickly identify this hitch’s maximum capacity by design separate from what the Jeep’s factory capacities may be. Seems to be nice and durable for its design and I feel it would function within its rated capacity no problem.

I think this was a good deal. The Receiver was easy to install. I think the electrical will be easy to install too.

This is a quality kit to add a 2” hitch to your Wrangler JK. Comes with the hitch that has quality welds, nice powder coating finish and has a spot for the light plug to hold securely. Included is quality hardware, plug/play wiring kit and a hitch plug. Good instructions. Highly recommend!

Easy install. Came with all the parts needed for installation. If you’re wondering, you do need to take back bumper off to install it. I was done in a little over an hour from start to finish. Only suggestion I would make to them is to include torque amount for the 4 bolts.

Absolut top Teil. Gute Verarbeitung. Stabil. Perfekt

Very reasonable price ,very easy to fit. What’s not to like.

Item is exactly what I needed. Price was way better than local suppliers. Instructions were clear and hitch was easy to put on. Wiring worked great and have had zero issues. Highly recommend!

para jeep wrangller jk queda perfecto, ya incluye tornilleria y cable para conectar las calaveras y luces auxiliares. Lo uso para un rack con 2 bicicletas, es de buen material.

It’s nice product and I recommend it