Your coloring possibilities are endless with this beautiful color. This opaque color is specifically formulated to color the Resin Obsession super clear resin. Directions for use: Warm the part A super clear resin. The ideal temperature is approximately 100F for about 5 minutes. This will make the resin a thinner consistency and easier to mix in your desired color. Gently stir the pigment into the epoxy resin until you reach the depth of color desired. Do not exceed 10% of the total weight of Part A as this may prevent the system from curing. *The amount of color you mix into the resin contributes to the total amount of Part A.* Measure the appropriate amount of Part B super clear hardener remembering that the super clear resin mixes two parts A to one part B. Carefully mix Part B into Part A for two to three minutes. Scrape the sides of your cup and stir utensil several times during the process. Cast as desired. This pigment does not glow in the dark. A few additional suggestions for success: *The opaque red and opaque magenta pigments may slightly stain a plastic mold. This can be minimized by wiping a thin coat of petroleum jelly inside the mold cavity before casting. *For the best results, pigments should be used within one year of purchase. Colors contain epoxy resin and conform to ASTM D-4926.
Trustpilot
1 week ago
1 month ago
