GRIFFIN Rack Mount Cart Stand & Top Mixer Platform 25U | Rolling Music Studio Booth Case Holder | Pro Audio Recording Cabinet Mount Rails | Sound Stage Equipment DJ Gear Display for Amplifier, Effects

Great customer service. I had a concern about shipping, simply sent email and Fletch was quick to reply with the answer i needed. Great to work with and i will definitly buy again.

I used this as a rack for my electronics test equipment, rather than for audio electronics, makes a nice mobile workstation, although it is incomplete. I will update this review in the near future with the finished set-up, as it will be worth viewing!

Shipment came at earliest date quoted.Parts are beefy and strong very impressive.One caveat: check the holes to welded nut alignment...one of the punched holes was off alignment by 3/16" and another was off 1/16". Theses required opening up the holes and alot of tricky positioning and force to tighten bolts.Lastly, the rack gear mounting holes were not rectangular as in picture nor required active nut and bolt so wait until it arrives before buying rack gear mounting bolts.My aunt arrived with drilled and tapped holes so I have a pile of captive nuts unused because I bought bolt with captive nuts based on photo and description.

What I don’t like:- The photos and description lead one to believe clip nuts are needed, but the product I received has tapped holes instead of square.- Although the holes were tapped, they kept the #12-24 thread size that most clip nuts require, so don’t expect a #10-32 from any other audio rack to fit. These are beefier screws, typically reserved for server racks.-They only supply 20 screws, so you’ll only be able to rack 5 pieces of gear to start on this 25u rack. So be prepared to order more screws if you intend on using this rack at it’s full capacity.- I do not trust the casters that are supplied with this under load. They feel flimsy and wobble.- When the casters are removed the base does not sit flat due to the assembly bolts protruding through the bottom. Eventually I plan to add feet or sturdier casters.- Some of the welds are questionable, as in some do not appear to have achieved complete fusion.- Although the vendor Griffin advertises they are based in the US, the parts are manufactured in China.What I do like:- Despite the wobbly wheels and questionable welds the frame appears to be sturdy from what I can tell.- My gear fitSummary: Despite the misleading description and less than perfect design, it gets the job done for a price I can handle.My biggest concern is the apparent lack of communication between Griffin and GeekStands. Not only are your photos misleading, but so is the information you provide. While reviewing other racks sold by this seller, GeekStands provided the wrong thread size to questions ask by customers and then had to be corrected by other customers who had purchased their product.I probably will never purchase another piece of equipment from this seller, nor would I recommend them due to their inability to provide factual information about their products.

I really like the design and layout of the racks. My only problem is that they area bit misaligned and the racks do not align perfectly. I have to loosen the frames and push the pieces into alignment to get some of my gear into place where the rack screws fit in place. I think this is because there are 3 different rack sections in use and if I align one, another goes out slightly. It's a complicated design, a little geometry in this design, so it takes some good engineering to get right.

Excellent product and great service