1/4 Inch Shank Rabbet Router Bit with 6 Bearings Set, SellyOak Multi Rabbeting Router Bit Set for Multiple Depths (1/8", 1/4", 5/16", 3/8", 7/16", 1/2" Interchangeable and Adjustable Bearings)

Except for a few nicks in the paint on one of the bits everything was fine in terms of appearance. Packaging could have been better, especially since I usually store them in the cases, but this may not be the case with these. The bits were too large for the cases, and had to be pulled out with some effort which I wish was not the case. Will update after use. The items were exactly as described though.

Bought these to do channels on 3/4 MDF that was going to be against a wall where there is a little piece of molding that would prevent it being flush. These worked well for what I needed.The bits worked great and the only issue i had with them is with the one that holds the bearings. The shank on the bit it perfectly smooth so there was nowhere to grip when attempting to remove the bolt that holds the bearings on. I ended up having to remove the cutting bit i had already installed on my router to put this bit in and then was able to loosen the bolt. Not a huge deal if i had known before hand the do this, but was a little annoying to have to remove the one bit to put this bit in, and then reinstall the original bit. Considering that this bit does nothing but store the bearings, it really should have a flat side on it to allow a tool to grip it while tightening/loosening the bolt on top.As far as longevity, I can not make any statement about these as I only bought them for one use, and might eventually use them again, but they wont see major use. If for some reason I start using these more i will edit my review to give info about how they hold up.Overall, worth the money as you dont have to spend alot for something that will only be used once. If you need these for multiple uses, you'll have to get them and see for yourself.

I bought this set because it has six different sized bearing to swap out. The bearings should slide on and off the shaft easily but I had to tap the bearing on. Now I wonder if I will be able to get it off again. Must have been a burr on it. The cutters worked fine as they are carbide tipped.

Great set of rabbet bits, especially for the price. Made nice, clean cut on my door frame. Was super hard to get the bearings off because the bit is round. Was able to use a wrench to loosen the screw. Would definitely recommend for a starter set.

Unlike buying these bits at the big box stores for 2 to 3 times the price for just one bit, this set came with a whole set of spacers/bumpers. Each bit comes in its own box for storage too.

I bought these to rabbit some yellow pine into shiplap. They work great when they’re fresh and sharp, but about twenty 10ft passes on SYP left the first bit very dull, which led to a lot of gouging. Surprisingly fast for such soft wood. Anyway, I planned to do the alternate lap with the second bit and swap in a different bearing, but none of the bearings would fit on the spindle. The inner race of each spare bearing was apparently machined with an ID clearance a fraction of a mm narrower than the spindle of the router bits. The only way to swap it out without hammering is to heat the new bearing and force it onto the spindle with a shop press, but that’s not exactly what I would call “interchangeable” ya know?

I purchased this tool in July but didn't use it until November. I needed to change the bearing to one of the other 6 bearings that came with the rabbet only to find out that none of them fitted the rabbet's shank!I would probably return it but when I tried to force one of the bearings on the shank, it broke! Test the bearings when you get the product!

I'm not an experienced woodworker and only needed this bit set for one particular project at this time but I can say the bit cut through the Poplar wood like a hot knife through butter.

Tools work great for the job I was doing . Make it a lot easier

These are okay. Could be sharper but they are cheap so you get what you pay for

Good products

good quality at good price