June TailorThread Mates Craft Organization, Multicolor

I bought these and three other styles of bobbin holders to see which would work best for me. These are simple and do their job well but were not the right choice for me. YMMV. All of the styles I tested worked with regular spools (I go all the way back to wooden spools of thread bought at Woolworth's! [you young whippersnappers can ask your grandparents]) but these were useless with my cones of thread. These simply fell right out — the  BOBBIN HOLDER…'BOBBINI' (12 Pieces). Storage Bobbins on Top of Thread Spools. Fits Type L, Class A(15) and Class M Bobbins and works on most sewing thread spools. By Smartneedle.  were the only ones that worked well with both spools and cones.Most of the holders I tried (including these) also had a problem when used in the regular spools if those are stored on pins or pegs in a storage case or rack. The pins encounter the bobbin holder before the spool is completely down over the pin and sitting flatly. The  Handi-Bobs HB18 - pkg of 18, stores bobbin w/thread spool  were the only ones that have an opening that allows the pin or peg to pass through — the other holders block the pins. These June Taylor holders were the worst in that area.These are all the bobbin holders I tried:-  BOBBIN HOLDER…'BOBBINI' (12 Pieces). Storage Bobbins on Top of Thread Spools. Fits Type L, Class A(15) and Class M Bobbins and works on most sewing thread spools. By Smartneedle.  (IMHO, the best all-round solution when cones are involved)-  Handi-Bobs HB18 - pkg of 18, stores bobbin w/thread spool  (best if you use only spools stored on pins or pegs — if they had worked with cones they would have been my first choice)-  Bobbin Buddies ~ Set of 20 ~ Keep Your Bobbin Threads Matched Up with Your Thread Spools  (2nd best with cones — fall out more easily than the "Bobbini")-  June Tailor Thread Mate Spool and Bobbin Storage  (work well in spools but definitely interfere with pins or pegs through the spools)The  Handi-Bobs HB18 - pkg of 18, stores bobbin w/thread spool  help to control the loose thread ends both from the bobbin and from the spool. The bobbin is held firmly enough that it does not turn easily when the thread is pulled. This means you can wrap that loose thread end from the bobbin around one of the projections on the holder designed for that purpose. The loose thread end from the spool can be wrapped around a different projection (there are 3). Helps keep things tidy. With other bobbin holders I purchased a few feet of ½" I.D. clear plastic hose from the hardware store. I sliced off a bunch of ¼" - ⅜" rings (measure the space between the top & bottom of your bobbins to get the correct size) and made a single cut at one spot on each ring. That left me with curled plastic strips that could be placed over the thread on a bobbin to keep it from unwinding easily. 50 rings cost me less than 2 dollars!

They work GREAT on Coats & Clark*, Mettler*, & Gutterman* thread spools! They Do NOT work on Aurifil* spools. : ( This is the only reason for 4 stars.

Love these!! These are a lifesaver, now I can keep my thread and bobbins together, will be ordering more

These are so handy to keep bobbins organized with the matching spools of thread.

Quite practical; they helped organize my thread drawer.

These are very good to keep up with thread and bobbins

I loved these...I had to search all over to find them. It was worth the search.

Great tool to organize thread baskets.

I loved these so much, I ordered more. They hold bobbins very well and are very tight and secure in the thread spools.

El producto en sí esta muy bien, el problema es que tengo bobinas de hilo de varias marcas y algunas tiene el canutillo tan ancho que la pieza esta no le sirve.