Halloween Resin Silicone Molds, Resin Coffin Molds Storage Box Molds, Halloween Decorative Casting Mold for Halloween Theme DIY Making Supplies

It was just as described. Easy to use and seems sturdy. Great price

Love this but the issue was that as it was hardening the sides bowed a bit in the mold. Not sure if this was the product or user error but I wish it was a bit more sturdy to keep the sides from doing that.

Leaves a nice shiny surface and clean lines. However when pouring the lid I could see it bowing outward as I filled. After it cured the lid still fit on the box base,but its way more thick than need be. I recommend filling below the last ridge line,and then finish pouring it off after that first pour hardens up. Don't need to wait till cured to finish though. The base mold stayed firm throughout pour,and cured nicely to a shiny clean lined surface. If the lid piece was just a bit thicker, I feel it would have not caused the issue of "bowing", and i would have rated a 5☆otherwise.

The mold makes a nice coffin box. There’s a lip on the lid so it fits into the coffin. Like other reviewers stated, you have to work the air bubbles out of the lid; I used a toothpick and squeezed the mold. The mold makes shiny pieces.My lid mold is a little big for my box. To get the red lid to fit on the coffin I had to force it in after unmolding before they were fully cured. It’s not a perfect fit, but you can’t tell unless you’re looking right at it’s side.

This is the best quality coffin I have found . This is the only one you need.

I've had a really easy time with this mold despite the reviews. The only thing I've had to do is put something heavy on the bottom part of the coffin on the sides to make sure the lid fits or demold it early to bend it to fit.. which sounds complicated but it was very easy. Love this mold 😁

The base of this mold needs added support after pouring. The sides droop outward unless you place something up against it while it's curing.Not a deal breaker for me, but it's a little annoying. It would be nice if the designer included a removable hard plastic support with it. (I have several silicone molds besides this one that includes supports to maintain the shape after pouring)Currently, I stand up two hard cover books and push them in slightly to support the sides, but it is difficult to get them uniform.My 2nd complaint is the very thin lid mold. The lid of the coffin will probably work fine for a resin pour, but using craft cement it is difficult to get all of the air bubbles out. The top part of the lid does not allow for the mold be built up to endure a snug fit onto the coffin base. If I want the lid to stay on nicely, after the coffin is done curing, and has been removed from the mold, I mix a thicker cement and spread it on the back-inside part of the lid to raise the lip of it. When that dries I gently sand with a 100-120 grit or higher and dry fit everything before painting and sealing it. Also, I personally like to attach a handle to the lid. I use half of a mini skull mold, attach it with permanent adhesive, then wait another 24 hours to paint and seal.

So teeny I wonder if they are designed to be a joke gift for a resin crafter.