fit for Fairlady350Z 370Z VQ35 VQ37 Upgrade 24 Row Engine Oil Cooler Kit

100% would not recommend, my oil cooler came without gaskets, I tried to put it on thinking it doesn’t need gaskets, and oil went flying everywhere when I turned my car on, it was leaking bad because I realized my box never came with gaskets to seal it, to this day I have my oil cooler sitting there doing nothing, since I never received gaskets with my order. WOULD NO RECOMMEND!!!

Had to replace one 10AN line leaks but it's OK

The bolts that hold the cooler to the bracket are too short, so just find 4 longer bolts and use the locking nuts provided.As far as the cooler itself, I didn't have any leaks from the cooler or the lines. The only leaks came from the sandwich plate.DO NOT USE THE O-RINGS THAT GO ON THE SANDWICH PLATE AN FITTINGS!!They will break and leak!! Throw away the O-rings and wrap the threads with a good amount of Teflon tape and then screw them in nice and tight. Also make sure to Teflon tape the 2 NPT side ports as they will leak if you don't use Teflon tape.This kit worked great for my 370Z and the difference in temperature is incredible. Definitely recommend this to save over $400 compared to big brand names but you must know what you're doing and properly install each fitting with some Teflon tape.

As everyone else said, the mounting bolts are too short, the plugs on the sandwich plate leave if you don’t use an extensive amount of Teflon tape, the kit is a little cheap but overall cools my oil decently. The o rings for the sandwich plate are trash and the aluminum isn’t high grade. But what can you expect for $200.

Hello all,I have a brother who is a car enthusiast and has a Nissan 370 Z.He asked me to purchase this Cooler kit for him.In his words he said:" I had to replace too many things and the adapter didn't work. I had to buy it from Mishmoto. I installed it in my car and the lines and fitting were straight garbage. I had to replace this with better hardware."There you go folks.