Bramley Power Triple And Quad Monitor Mounts (Triple Horizontal With Stand BP-SM213D)

Great value for money. Really sturdy. Straight forward to put together (most of it comes pre assembled). Comes with enough screws and washers for different monitor types.Heaps of adjustability.

Ok, so i was under the assumption it was capable of supporting 3x 27" monitors. Only just.If you have 3 reasonably modern monitors (light-weight), you will be ok.Problem i had, the arms are only JUST long enough to carry 3x 27" monitors in a 'flat' plane. (Barely).If you have curved monitors, this unit will not allow you to 'curve' them around the workspace. You should purchase one that is rated for 32" monitors for a longer span (arms). I actually modified the vesa mount with a wider plate so i could set them in a proper 'curved' fashion. But beware, they then become TOO front-heavy, you will need to clamp or secure the foot to the surface. THEY WILL TIP OVER !!

Sturdy, durable, easy to use. Holds my 3 24 inch monitors perfectly, I even bought another one for my brother for Christmas.The left and right arm are SLIGHTLY not on the same level, but not a big deal.

Crazy old man using for several tablets. one laptop, one smart meter, and a cctv camera plus a phone. Have mounted it onto an old office chair for mobility. It's fantastic not only for holding as much as any sane person could require for viewing but so easy to add home made bits for those times I need to stroke my white cat.......

I was a little wary about how stable 4 x 24" monitors would be on a free standing bracket without a clamp, but the design works well and is very robust. The stand base is strong and large enough to keep the whole thing stable, but is very slim, so it doesn't interfere with keyboards etc.It's good value and comes with plenty of cable-management clips and 2 complete sets of screws / spacers to fit different monitors. I'm using DisplayPort's Multi-Stream Transport for the video outputs daisy chained from one monitor to the next and IEC mains power cable Y-splitters - so I only have one video and one power cable to the whole thing which makes the desk much neater than before.Perhaps I was unlucky, but 1 adjustable monitor arms had 2 faults. The multiple arm joints have shims top and bottom to keep the joint tight and avoid metal on metal wear when adjusting the position. On the joint nearest the pole, the bottom shim has not been inserted properly and has been damaged, so the monitor on that arm is a bit lower than the one on the other side. There is a bit of adjustment on the actual VESA bracket behind the monitor, so I managed to level them up, but one of the four monitors is not fixed as rigidly as the others. On the same arm, the monitor tilt joint was very loose - so the monitor just flopped down flat from it's vertical position. When I tried to tighten the joint with one of the 5 supplied Allen keys, I found out the bolt's Allen key slot had been forced by whoever assembled it and the hex shape was completely rounded. I thought about returning the whole thing, but all of these monitor stands take a lot of work to assemble - most of which I'd done, so instead I just about managed to tighten the joint enough with a pair of mole grips.The stand is very flexible - see photos. I initially made a 2 x 2 4K monitor wall + a 5th free-standing monitor. It looked good with the Dell monitor's ultra-thin bezels. I rotated the top 2 monitors 180 degrees (upside-down) so all the thin bezels were next to each other. Getting all the monitors seamlessly joined up is extremely fiddly to position the numerous adjustments. I counted them - the stand has 32 possible adjustments! But that appears to be true for all stands - so it is not a fault.In practice I will be using them as separate monitors and not as a single giant screen. Also it was a bit claustrophobic with four monitors towering above me at my desk. So I went with the layout in the second photo. Three monitors horizontally at desk height for normal daily use plus two quite high up, pushed back and tilted down a bit - for when I want to occasionally keep track of lots of things. A lot less claustrophobic plus the cooling vents on the Dell monitors are all now at the top - in the Video Wall set-up the top two monitors were getting a bit warm.

Really easy to assemble, really easy to add monitors, sturdy and fully adjustable height and width, up and down angle changes also. We'll chuffed😁

Bought this for my three 24" screens. It says it can hold up to 27" so thought it would be fine and the base looked big enough. I usually buy the through the desk style from a different brand when setting these up at work but didn't want to drill more desk holes so though this would be easier.I set it up to replace another arm system, had the screens at the same height and the whole thing just fell forward.With three screens on, even with the side ones only at a slight angle it will wobble forward, the slightest bump on them or your desk and over they go! A strong fart in their general direction would put it off balance.The pole allows you to raise and lower the height, the only way for it to be stable is to have it so low it's not worth using it, I'd be better off putting the monitors on the stands they came with!Also because of the thread height adjustment on each screen they are very wobbly, which can't be tightened, it's like the bit on the screw isn't quite big enough to be flush against hey back so they just wobble at the slightest movement. Handy when the slightest movement makes the whole thing fall over!Totally not fit for purpose. Don't buy this if you want your screens to be more than 3 inches off your desk, safe or in any set up that isn't just a straight line.Don't trust your monitors to this wobbly monster. A drunk child on a bouncy castle is less likely to fall over.

Holds for 27 inch monitors comfortably little bit wobbly it’s not the most steady of products but it does what it says on the tin biggest downfall is that you can’t move the screens forward and back it’s not really easy to adjust the screen is once you’ve placed them takes a while to get them set

Sono molto soddisfatto, lo consiglio a tutti. Montaggio semplice. Ottimo materiale. Resistente e robusto. Perfetto!

Molto stabile anche con monitor grandi e pesantiBuona possibilità di orientamento

Robusto come materiale ed integro. Si notava però che era stato già venduto e restituito perchè aveva dei graffi (insignificanti per l'uso).Difetto: con 2 monitor da 24 sta su, al terzo dava il giro. Tocca ancorarlo, io ho usato una morsa da legno ed ora è perfetto!

El producto se nota robusto capaz de aguantar todos los monitores, pero los acabados no son los mejores, si notan picotazos en diferentes partes, luego tambien hay ciertos detalles que no estan acabados como el pulido de algunas esquinas. Pero como todo va escondido detras de los monitores no le he dado importancia

No ha soportado el peso de los monitores, son de 24 pulgadas y se han doblado los brazos. Los monitores se caen continuamente hacia adelante