PGYTECH Mavic Mini and Mini 2 Landing Gear Extensions Legs Compatible with DJI Mini 2. Mavic Mini Accessories (Mavic Mini)

The work when installed but when all 4 installed the Mavic Mini will not fit in the case. The 2 small extensions that go on the front must be removed every time you put the Mavic Mini in the case that comes with the fly more package. Waste of money, unless you want to cut apart your case to get these things to fit.

It's a bad design.ñ because your prop guard will fit and if you force the prop guard, your gimbal guard pops off. I don't know about you guys, but my Prop Guard and Gimbal Guard are more important than a landing gear that fits extremely , Extremely tight on it's front legs, which are probably the most fragile legs of the Mini 2. Also it will not fit with the fly more combo case and since they fit really tight, it's not a good option to keep popping them off, as it will be a matter of time before your break a leg on the Mini 2 🤦🏼‍♂️Like most have said, these were probably made for the Mavi Mini and not Mini 2, but since they fit but tight, they figured people would still use them?Maybe they need to upgrade these and Redesign them for the Mini 23 Stars, otherwise it would of been a great product.

Bought to use on my mini 2 but had to use on my mavic mini 1 because too tight a fit on mini 2 front legs...scared to break front legs of mini 2 when trying to remove after flight...Had to use a previous purchase from a different company on mini 2 which was used on mavic mini 1...

Now these DJI drones are portable and very light and due to this they have to make a design that is compatible with the portability of the device, that compromise in this case the landing gear. The Phantom series have a great landing gear but this is not the case with the Mavic series. Due to this PGYTech has found a solution for this, creating these great small legs that complement the portability of the Mavic Mini 2. They are great, easy to install and set up and most of all, does not affect the portability of the Mini. They are vey light and when in flight does not compromise the maneuverability of the drone. The ons draw back the I found is, if you use the strap that came with the drone for keeping the propellers in place, this will not work when the legs are installed, in order to fit you will have to take the legs out from the drone or find a solution around it.

I really like these leg extensions. They do fit the DJI Mini 2 with a slight adjustment. Some are correct to say they don't fit but they do .When I first installed the front legs they went on a little tight. When I went to take them off to put on the propeller guards they didn't want to come off easily so I used a blow dryer to loosen them up and that worked effortlessly. Then with a little trim work on the inside with some hobby knifes I trimmed some plastic out and used some light oil to lube them up and was no problem after that removing them.If your going to leave them on then theirs no work required until you need to take them off then heat them up. The rear legs are spot on . Every thing folds up nicely and fit in the bag it came with and also fits in a formed hard shell case I use.

Good Quality Product from PGYTECH. Packaged extremely well (+ Points from my perspective). Included card has clear picture instructions (Chinese only, No English), but pictures do a good enough job on how they go on the drone. The plastic feels sturdy and strong, and I love the rubber feet at the bottom, something the competition doesn’t have, or at least I haven’t seen. How long they last, time will tell but with the included 1-Year warranty, that puts your mind to rest as well. Overall a recommended purchase.P.S. The only thing negative I can think of is pricing. I think $8-10 would be a very fair pricing point on this. The current price is a bit on the higher end compared to all the competitive products.

I like them. They give more than enough clearance to mount an anti collision light on the bottom side of the drone. These fit on my drone very tightly (especially the front ones) so they are not something that you will take off after every flight.FYI!The original DJI propeller retainer will no longer work with these installed so you will need to find another after market prop retainer.

I really like these snap on landing gear for my new DJI Mavic Mini 2. The instructions were minimal but I got them figured out and mounted just fine. I like that they can stay on the aircraft when storing. Had no problems fitting into the Fly More Case so don't know why others do. I did notice that the original DJI propeller retainer will just barely work with these installed. That is a shame and should be looked into. Taking off a star due to that.

These are well made and they fit SNUG. Like so snug you have to be careful not to slip your hand and crush your mini 2 while putting them on if you want to push the legs to the bottom of the slot. Don't get me wrong these are very cool and I can't believe that DJI would not come out with something similar because it is so smart; they are just letting pgytech make all KINDS of money on these but they also create a problem. The propeller guard strap no longer fits. And these legs are not to be taken off all the time. Trust me they are a pain to put on and take off. So now you have these cool legs but the strap won't fit on the drone. I may have to cut the DJI strap in half, cut 2 small holes in each half and then connect them with a strap somehow.UPDATE: I ended up having to cut my DJI propeller protector strap into 2 pieces, notched a rectangular hole into each side, then connected the strap with a small velco cable cord tie strap to extend the reach of the strap so that I could connect it. I also then had to carve out extra space in the foam of my drone hard case because the foam would not allow for the extra width. All in all I now have my pgytech landing gear extensions on my mini 2 drone, they will be staying on and not coming off because they fit so snug and tight that taking them off would risk damaging the drone, and now the propeller guard fits and the whole contraption fits inside my hard case. Was this worth it? For me, yes. But I really shouldn't have had to go to this much effort.

I tried installing the front legs but they were so tight I was afraid of breaking them so I ended up removing it. Installing the rear extension legs was impossible...this product is NOT for DJI Mini 2 !

Still works fine but was pretty tight on the front legs on the Mini 2. Great if you've been having issues landing/taking off in grass or slightly uneven ground

The battery dies quickly as it disrupts the drone's aero dynamics.

It works amazing! The problem is that the original holder wont work need to buy a silicone protector for propellers. Anyway they work great!