MeyerProducts, LLC 8271 Home Plow Shoe Kit , Black Small

Product was as described. Could have supplied more washers. Welding was sloppy. Had to file out the slag from the slot before it would fit properly on the plow

The shoe brackets were really easy to install. My only complaint is that there is not enough washer spacers to adjust the moldboard height if needed. The spacers included are only to set the moldboard height for a smooth flat surface. If the surface in uneven or gravel there is not enough spacers to reset the height so the cutting edge doesn't dig in too much. Some users complain the shoes don't work and that is probably the reason they have not adjusted the shoes properly.

I'm undecided, they are loose when installed and seem spindly/weak. We will see. I had to buy additional washers to get the blade off the ground to do gravel driveways.

I purchased these for the Meyer Home plow, the specific plow they are made for. So I was very troubled to find that they did not line up with the holes in the plow. It took me 30 minutes with an angle grinder to carefully shave a little more than an 1/8' off the leading edge so that they would line up enough to get the bolts through. They seem sturdy, and came with plenty of washers to adjust blade height to my needs, but there is just no way an accessory marketed by Meyer to fit their plow should require significant alteration just to fit as intended.

Easy to install, works good . Not much more I can say ,they work well as snow shoe !

These shoes have worked OK but as others have mentioned, the number of washers provided isn’t enough to really provide much lift to the plow. I have a gravel driveway and I wound up digging it up the first time I used the plow until I bought some additional washers as the hardware store.Other than that they were easy to install and they seem like good quality. Very heavy!

Fit right onto the Meyer Homeplow. 4 Minute installation and do what they should.

Great quality and well made.