Motorcraft Exhaust Gas Recirculation (EGR) Valve - CX-2102

The installation was easy. Removed the old valve (mileage: 117K) and installed this unit. So far the check engine light has reset, gas mileage is back to normal, no power loss, and fully functional. It will be nice for the seller to add a small lubricant to break seal (rust) from old bolts before installing new EGR valve. I will update this review after 3 months with a progress report.

excellent i got this part here in amazon for 60 dollars cheaper than my local auto part store. i took out the old part put the new part and as soon as i turn on my vehicle i could easily notice the difference. after i test drive my 2004 ford explorer, it has faster acceleration and it didn't feel heavy or slow like before with the bad part, now with the new part it feels lighter and faster, with the old part the check engine light will turn on again the same day after erasing the code, now 4 days later after erasing the code and putting the new part the check hasn't come back. so yes i'm very happy with this product and is also a genuine part not a replacement. this part fixed error code P0401 and P0402 for me. perfect fit. excellent results

Motorcraft is the brand of parts made by and for your Ford automobile. I could have purchased a cheaper off brand replacement in place of this CX2102 Exhaust Gas Re-circulation Valve, but it can be a PITA to install, and I didn't want to have to do it twice. So I bought the OEM part at a very fair price. This part looks exactly like the one I took out and installed pretty much as I expected - hard to get at, but not quite as hard as I anticipated. I placed a piece of 12" x 6' plywood on top of the engine compartment so I could lay right up on top, which helped me get that one troublesome bolt out. BTW...Don't do like I did and forget to tighten the large nut on the tube back down when finished.

NA

This part fits 2006 Ford Explorer. One tip: if you want to do this job in twenty minutes. Purchase the EGR mounting bracket from Ford (about 40 bucks). Call ford parts. you are looking for just the bracket (EGR sensor comes with a gasket). The bracket is not sold in auto part stores. The bolts that attach the sensor to the bracket are usually fused on there (two 10 mm bolts). It's not worth the time to get the bolts off when you can purchase the bracket, Pull off the bracket (two 8 mm bolts) I should say twist off as there is housing attached. Bolt up the new sensor to the new bracket and twist in. Connect and done. The exhaust tube can be loosened with an adjustable wrench. Take off blower assembly and get at it that way. Save yourself 200-300 bucks and say goodbye to the check engine lamp. 8 mm and 10 mm. Deep sockets and an open end 8 mm are needed.

Motorcraft brand. Worked perfetly.

I have a 2005 Mercury Mountaineer V6 that had the check engine light on. I used a ODB2 reader and discovered the error code to be P0401. Research indicated it was likely the EGR valve. I bought this here from Amazon due to the good price and fact that I have had better luck with the Motorcraft/OEM parts than other brands. I also purchased a 1-1/16 inch crowfoot wrench (ASIN B01E9GK4KG) to help get the large nut off. There are also two 10mm bolts you need to remove. I recommend using a deep socket 1/4" and small 1/4" rachet to get those off. All bolts and the nut were difficult to remove so spray them with PB Blaster multiple times and let it soak in. A long, swivel 1/2 drive rachet was needed to remove the large nut. Installation of this part was easy. Afterwards the check engine light disappeared. I am satisfied and saved some money doing it myself.

Good part easy to install This is my second part like this in the last year. One from a different supplier, which never worked well, I replaced it with this one and my truck runs 100% better no hesitation at all an increase in gas mileage.

Pedí la refacción para mi Explorer XLT 4.0 V6. Le quedo perfecto. Desde que se inició la marcha desapareció la luz check engine. Y el escaneo no demostró más códigos. No olvidar limpiar con sonda el tubo de conexion a la salida. Espero que siga así.

Not Motorcraft!!! I didn't find the brand name on the Piece or on the box. It worked only for few minutes and then the check engine sign popped up then the error code P0401 was found. My car is Ford Explorer 2009 with 300K Km. mileage. Note: The old EGR that came originally was siemens.

Perfect fit for the V8 vantage