Modern Arch (5-Pack) Adjusta-Pull Adjustable Cabinet Handles 2 to 8-13/16" (51-224 mm) Hole Center Pulls | Modern Matte Black Hardware for Kitchen Drawers, Dressers, Furniture P43971K-FB-CP

I recently updated my kitchen cabinets by painting them. Of course I wanted to switch out the builder grade hardware for something a bit nicer, However, the mounting holes were spaced at 3 inches! Yikes - that really narrows down the choice of nice contemporary hardware - it just doesn’t look good to have tiny handles on tall cabinets. BUT, I was not interested in drilling new holes. I’ve done it before for bathroom vanities and I just was not willing to tackle the kitchen. Enter Franklin Brass adjustable fit hardware! Perfect - they gave me the look of longer handles whilst using my 3inch spaced holes.Very easy to install. First slide in the bolts and add the washer and then the nut (just one turn). Slide on the handle to the height you want and tighten up the bolts using the winged gizmo to medium tight. To get everything in the same spot I used a small piece of cardboard as a measure on each door to get it in the ballpark, and then a level as we all know cabinet doors are never hung perfectly! Then I fully tightened the bolts.Things to note:1. The little winged gizmo could do with having bigger wings. It was a little annoying and I have small fingers so I can imagine it might be very frustrating for someone with thicker fingers.2. Each handle is individually wrapped yet they are sold in sets of 5. I feel this is very wasteful in terms of plastic packaging and the extra winged gizmos. If they were being sold individually this would make sense but as they are a minimum purchase of 5 a lot of waste could be saved.3. I wish the design could be modified so that the ends of the pulls are solid instead of showing the gap where you slide it onto the bolts. Perhaps too much to ask, in which case some end caps to fit the gap would make a big difference. You can only see the gaps on the tops of the pulls for lower cabinets, but still......something for the designers to address.In summary - a little pricey but well worth it in my opinion to not have to drill new holes!

So, these are excellent, sturdy, beautiful, easy to install knobs. The design is pure genius, and I have no idea why these are not more common. The ability to slide the handle back-and-forth until it's exactly in the place you want is pure genius given that so many pieces of furniture have irregular sized holes or rather the space between the holes. Install was insanely easy (see pics which are self explanatory). My knob holes were 2 inches apart. So these were perfect. The soft champagne color is perfect it's not too bright and brassy and too bold as the other ones might be. It looks classy and muted.A couple things to keep in mind:1) When installed against dark wood, alignment will become an issue. You'll have to make sure your doors are hanging perfectly, or you'll have to jack with them until they are. Because unlike dark knobs or matching wood knobs, this beautiful champagne colored knob, in a straight line, is going to show the slightest misalignment.2) Therefore, my advice to you is, make sure to have a glass of your favorite adult beverage on hand, while installing. Otherwise you will be prone to rages, throwing things, cursing madly, and otherwise disrupting the general peace.I got three of four installed and was very pleased with myself, and put off the last one because I knew that one door always hung cockeyed. There was no putting it off, I had to jack with it repeatedly. Even now, it's not perfectly aligned (for the OCD amongst you, and for me, tomorrow, sober). I, however, am currently enjoying my second glass of Woodford Rreserve. And I'm perfectly satisfied with the current alignment situation. Love. And I would definitely recommend these for a low-cost rehab of old furniture, to give it a beautiful new mid century vibe.The only criticism I have for the company is, why not sell these in a six pack? Come on, you know that most furniture will require six pieces. I, on the other hand, only needed four. Happy. Love.

I absolutely love the color of these pulls. They match the champagne bronze delta faucet perfectly and have a beautiful modern look. Problem is, they are so low profile that they are really hard to get ahold of to open the cabinet. We left them on for about a week to see if we could adjust to them but it continued to be a struggle. Which we found annoying. I wanted to love these because the look is perfection. One more thing to note, drawer fronts would need to be modified to accommodate the washer and screw head as it was too big to sit down in the concave area that other screws fit in, thus allowing the drawer front to be attached to the drawer.

I recently refinished an old mid-century stereo cabinet. (See photo.) The old hardware dated the piece, but it’s age meant that the holes were not standard size in 2021. Enter these adjustable pulls. It took me less than five minutes to attach the three handles and they totally change the look of the cabinet. So grateful for them. More companies should be making adjustable drawer pulls!

These handles look beautiful in my kitchen and are good quality. These would be a great option if you are replacing handles because the handle slides over the screws, so as long as your holes are less than 4” apart you can use pre existing holes. They were a bit tricky up install, but I think that’s because the screws were barley long to go through the drawer. I tried finding slightly longer screws but they require full thread hex screws and finding the correct size is near impossible.

Very pretty, modern looking handles, came with both short and long screws, no tools needed. I had different hole spacings and with these I was able to use the same size handles uniformly.

Fast and easy to instal. Love the adjustable sizes, makes it easy to fit without drilling unnecessary holes.

Great pull! The adjustable aspect is perfect for those "hard to fit" places. Nice quality. Highly recommend!