CONFAST 3/4" x 7" Wedge Anchor Zinc Plated (Box of 10)

I used these bolts on a two post lift in my shop. They worked great and I torqued them to 175 lbs. no issues at all.

Excellent quality. Worked exactly as intended and held down an entire grain silo!

Quality name not generic and does the job. Very happy with purchase and would buy again.

Used these to install a 9,000 pound car lift and worked perfectly

Used 12 of these in a 2-post lift install. These things are awesome and very robust. Installed all 12 without a problem. Torqued all to 150ft lbs. after 1 week, I retorqued them all and all but 1 retorqued to 150ft lbs with less than 1/2 turn. One pulled almost all the way out. So, I hammered it back through and installed a new one and it torqued with less travel than the failed one. Faulty anchor? Faulty concrete? All good now.

The anchor's sleeve doesn't engage immediately and results in the bolt engaging toward the top of the hole. The best I could do was to drill deeper and carefully insert the bolt so that the nut would engage and start tightening until the wedge engage. Then back the nut off and place what I was anchoring back over the bolt with the washer and nut and then torqued it.

Worked perfect

Way better price than buying them from a bog box store.

Used to install my car hoist works great!

Went in good to hold new car hoist down hope it stays strong

Solid product. Perfect for mounting light posts

They did the job and were a great price compared to others.I had some that bit hard and torqued down nicely. Others that took a while to bite and get a decent torque. Used to set up my 2 post hoist. End of the day they held down the hoist when lifting a 9000lb truck.