SONGINGFXLION Nano L15R Angle Adjustable Mini V-Lock/V-Mount Plate with 15mm Rod Mount

This is a V-lock battery plate, which seems mostly made of aluminium or similar. It's quite compact in size and the release mechanism is from the top of the V.It has one singular Dtap (or Ptap) connector.The main reason to get this is to attach it to rails or a cage probably. The main unit has 2 holes about a 1/4 20 size which are blanked by a thin plate which holds a rail block. The rail block casting is similar to that used on a neewer shoulder rig. much thicker than smallrig rail plates. Although the screw spacing seems similar. you probably could get a pair of the small rig rails or attach to a cheese plate. Unfortunately the 1/4 20 holes in the unit are slightly out on the spacing but a little filing to make more of a slot and you will be able to get 2 screws in.As is, I was able to screw it to the bottom of the centre column of my tripod. Not perfect but not too bad

First thoughts:ProsCan be angled away from vertical so it gives clearance to ports and cables.I can mount the rail directly using the ⅜” screw thread on the bottom.Nano V-mount adapter that holds 5-Pin Nano D-Tap batteries.Good secure lock with the battery.Rail mount with movable hingeConsPipe clamp slots are a bit narrow for any of my gear but the other screw threads allow me to mount it using a different method.Quite a high price point for an adapter/V-mount.Although I don’t have any pipe frame tubes narrow enough for the pipe slots to clamp onto, I can mount this using the other screw threads to connect it to my camera cage, L brackets or even straight onto a tripod.With the movable hinge I can angle the V-mount adapter away from vertical so it doesn’t get in the way of my other camera ports or protruding cables.Details and things to note (See pictures):5-Pin Nano V-mount adapter for Nano D-Tap batteries with a V-mount release button and a D-Tap output port on the side.Mini mounting rail with a movable hinge on the bottom, this also has 2x pipe slots and locking latches to open and close to secure on thin pipes.Hinge is tight enough to not move when the Nano battery is attached and the V-mount is moved to a wide angle.Final thoughts:I have a range of these adapters for different studio scenarios and I find them incredibly useful (some more than others), but it makes swapping in and out a Nano D-Tap battery a much easier process.I tend to use this mount as an additional cage mount adapter or to place another power supply close to my equipment, but I do find the mounting options less useful than my other adapters in this same range.I’d recommend this for its versatility but you may find it more useful if you have a full camera cage with pipes running from the handles as this will fit nicely in that type of rig. Mine cage has squared-off NATO rails so I have to connect it using screws instead.

SONGING FXLION Nano L15R Angle Adjustable Mini V-Lock/V-MountI was sent this in return for my honest opinion on it.This is a nice little v-lock/v-mount plate. It's heavy duty, durable, it's not the heaviest but not the lightest. This size is better than some I've come across, this one being smaller in size. It's roughly 10cm long, 6cm wide and 1.5cm deep.This comes with multi angle support, allowing you to face it towards you if and when needed. You have a quick access D-tap output. There is a 15mm double hole pipe clamp, with a U shaped connecting pipe.This is easy to set up and fab for keeping everything secure. It does work well for what's needed. I like the easy D-tap output and being able to swing it upright and backwards. I would recommend it. It is however, a little more costly on here than I've seen elsewhere but the quality is still fantastic.

The first one is the size, the size is moderate, and it can fully buckle any battery with the tail V port.The second is the weight, the weight is not very heavy, it is not a problem to hang on the 15mm rod.The third is the posture form, which can be placed vertically or horizontally in a different position, so that it is convenient for the user to switch the form according to the actual situation.The last one is the workmanship, the workmanship is very delicate.

This NANO adjustable angle plate features a 15mm rod mount for your camera rig.The size of the product is 12 x 11.8 x 5.4 cm and weighs 260 Grams. There are some 1/4″ and 3/8″ threads on the rod mount and one D-Tap Output is available.At first, I found it a bit hard to move but after continuous usage, it loosened up a bit.Overall, this is useful for my 5-pin Nano batteries, I am satisfied with the product, and it is reasonably priced.

The mini V Mount plate is good, and would be better if it had two D Tap outlets. I searched for one for weeks, but couldn't find one in this size. As a Z Cam user, a good alternative is the Nitze with the quick release for Z Cam.

It's a secure rod mount, that has a nice weight to it. It is a tad stiff at times, when moving it into different positions, but I can see that improving with time. Only downside is the price which I felt was a tad much.

This is easy to set up and use although it was a bit stiff at first. I do find it a bit weighty but it is solid and well made.