Allstar PerformanceALL18592 1/2" ID 1/2" Length Aluminum Tapered Spacer - Pair

I needed a spacer for retrofitting new wheels on a heater. After sleeving the axle to the new size, I used these spacers to center the wheel on the axle. The fitment was perfect and the material is high quality and machined perfectly. Highly recommend!

perfect description the quality is awesome. Needed spacers for the new Heim joint outer tie rod on the new build.

These spacers worked great to center a wire wheel's flange washers on the 1/2" arbor of my bench grinder. They securely rest against the arbor's inner-most stop (which is a slightly larger diameter step on the arbor). They are snug to the arbor, but are easy to install and remove. This is exactly the solution I needed to mount my wire wheel.

These are nicely machine parts that interfaced nicely with the bearing surface of my floating front wheels. Nice clean look.

Product received quickly. Exactly as described. Worked great.

Product is the same quality and measurements as advertised.

If you need these, than they are what they are, and are the size that they state, there is really nothing else you could say about them.

The shoulder on the shaft of my my bench grinder was only 1/16" tall and the flanges were wobbling, allowing the grinding wheels to run untruly. This spacer gave more than 3/16" shoulder height and solved the problem.