JoyBrosReplacement Parts Compatible for Shark ION Robot R85 RV850 RV761 S86 S87 S88 R71(RV700_N) R72(RV720_N) R75(RV750_N) AV751/752/753 Accessories Sweep/Main Roller Brush Filter Roller Protector

Everything fit my units just fine. One unit did make a racquet first time but decided to leave it alone and the next times no noise. Sorted itself out

Like anything else they’re probably going to skyrocket by the time I order them again, but they were a good deal and are compatible with my machine

Everything was great except for the roller brush replacement, it didn't fit well, and made funny noises. The rest of the kit was perfect though. The cost of the kit makes it worth it in the long run though, and will probably order it again just because it makes it easy to get the stuff I need.

Blue items were replaced with the black items (Amazon purchase). Highly recommend. Easy to switch out. The parts look slightly different than the manufacturer’s model, but it seems to work just great.Big tip: don’t throw away the little metal bracket looking thing with a screw for the circular spin brush… there’s a picture of it.And a picture of how gross my stuff was as an extra push for you to buy this!! You won’t regret it!

Todas piezas encajan con la unidad.

Even though our model isn't listed, these fit correctly.

So, I've been searching high and low for a kit like this for the AV752. None to be found on Amazon. I went to Shark's website and the filters were pricey. So, I saw in the comments where another AV752 owner took a chance on these even though the seller replied to her that they won't work. Thank God that brave soul decided to try this kit anyway. Here's what I think: The seller is just an employee who saw that AV752 wasn't in the list of compatible robots and replied as such. They had no firsthand knowledge. The other possibility is that AV752 is a newer robot and these sellers and aftermarket replacement parts manufacturers are not authorized to mention that there stuff is compatible with a robot model that may still be patented by Shark??? Not sure, but what I do know is that I was able to successfully install a new filter (to finally replace the one I've been rinsing for almost 3 months even though you are only supposed to use it three times) and I replaced my side brushes. (Not throwing them out though as I heard you can straighten the bristles by dipping into hot water). My robot is on a schedule to run 3 times per week. She started up this morning with no issues.Also note that the side brushes in this kit are slightly longer than the originals (which may help it scoop up more lint and dirt).I will update my review if my robot starts malfunctioning or I see the parts falling apart before they should. So far,, no complaints.I have not used any of the other parts yet, such as the roller brush or mesh filter as my original parts are still in good order.I have attached a few pics so that all you AV752 owners out there can see how the parts compare. Practically identical. The original parts have blue trim not that you needed me to tell you since you own it. Plus, the filthy gray looking hepa filter and bent side brush tell the story!

To start, the filters are good. No issue with them at all, that goes the same for the filter cover as well.The issues are more specific to the roller and intake replacements. They don't fit well inside my RV850BRN Shark. The roller is just slightly larger and thus the area it operates in allows for less debris to pass through without being stopped. I know that non factory parts aren't the same as base model but originally the shark was able to gather up an errant dime, nickle, q-tip or maybe a hair tie. Now that the roller is a larger profile inside the drum, nothing but the most sharp dressed dust particle may enter. The drum intake cover has a similar issue, its bigger and bulkier. When installing the drum cover, it can only be done in a specific way of angling the left clip in and then right, if not done exactly correctly it will not close as again, the slight extra material makes it too bulky.So, in closing, the extra material causes issues with cleaning and as well causes a bit more noise. I also assume that it is slowing down or eating a bit more of the battery to spin the roller with the extra resistance but I do not have the data to back that up with yet.Overall - it's alright I guess.

Justo lo que necesito para mi aspiradora, todos los accesorios son 100% compatibles y de buena calidad.

NOPE!!! What a difference this replacement brush and filter kit made!! Everything fit perfectly in my robot vacuum. I took all the old filters and brushes out of it and used a can of compressed air to flush any dust/debris out of it and installed all of the new brushes and filters. The sound it made when I used it the first time, I immediately remembered that it sounded that way when I first bought it. I could hear the difference of the bristles being stiffer and hitting the area rugs and floor better. And of course, it cleaned so much better! Great value for the amount of replacements!

Perfect. Easy to use. Fits my sharkey perfectly.

Ya me hacían falta para la aspiradora shark

It fits and does the work. The only complaint is that the roller is designed slightly different than the original, and the robot gets noisier with the new one.