GLISTON Paintless Dent Repair Glue Sticks Hot Glue Sticks Paintless Dent Repair Tool for Car Repair Dent Remover Tool Set - 10 PCS Black

I have a folded in rocker panel in the center of my car that has broken my heart. I started researching and practicing PDR to fix it.So far i've been doing quite well and it's almost completely repaired with this glue. It's the only glue that has the strength to create a strong pull to get the metal back to it's original shape.It comes at a price as it's cheap but not super cheap. Thankfully each stick is very long! Though I had to purchase a really good glue gun to properly use this stuff. But after doing so, performance has been VERY GOOD.Don't use a cheap crappy glue gun. It'll make doing PDR much easily with a quality Glue gun.I've used about 2 sticks so far and it has almost fixed the bad damage so 10 sticks should definitely be more then able to fix it.Highly recommend this stuff. Make sure you follow the requirements and exceed them for best performance! I use a 300watt glue gun that is industrial grade. Gives me more time to apply as this stuff likes to harden FAST!So far Alcohol 91% has done a great job at mostly cleaning this stuff up. Sometimes it can be a fight and this stuff is strong enough to remove paint so be careful.

Wow! I read the reviews and was a little concerned about the quality. The dent puller however worked great for me. The tool is actually a much better quality than I expected and the glue worked great and came off fine. I didn’t even need alcohol, just picked at it with my fingers and it came off fine with no paint damage.For the actual dent removal I found yellow glue sticks worked best. I glued them to the plastic end, then placed the plastic part over the dent. Waited about 3 min then gently squeezed the handle til it popped. Worked awesome.

After a freak hail storm, my fairly new car had about a dozen dents. I didn't want to file a claim with insurance so I figured I'd try this first. It takes a bit of practice but it does a decent job. Make sure your car is either in a garage or in the shade. If the metal is warm at all the glue won't stick. You'll need to pull the dents multiple times but it does work. I have a few that came out completely. Most of them came out enough that you can't find them. You definitely need to have patience but it does work.

Avoid this one. Ordered twice and mistakes both times. First off the packaging is horrible and the cardboard seems like it has been wet before, very thin and not strong enough to hold all the items in this kit. The first kit had a used glue gun which tells me they don’t evaluate their returned products. Missing pieces when I ordered a replacement. Avoid this Kit, you will have to go through the trouble of returning it.

I was excited about the idea of being able to fix my car dents. In theory, this should work fine. In reality, the glue doesn’t stick well and it pops off with any pressure from the device that’s supposed to pull the dent out. At least I have it a shot.

Due to a blemish on my new refrigerator, Lowes gave me 50% off just to keep it. I happily accepted because they refunded me nearly $1,500. I decided to try this $37 kit to see if I could make the dent less visible. The kit is surprisingly high quality for the price. The key is patience. The tab will come off after a certain amount of pull pressure is applied. This allows you to check your progress. I glued the tab on 4 times to get the dent out. The next part was much more time consuming. There was a slight bubble left from pulling the dent out. The kit comes with a rubber mallet and tools to tap the metal flat. This took me over an hour to get the metal perfectly flat as stainless steel is very unforgiving with light reflection. I was pretty happy with the result as it greatly reduced the blemish by at least 80%. Just enough not to look terrible! Great product if you are careful and have patience!

If you think you’re going to buy this and pull dents like a pro on day one you might be disappointed but if the more you use it, the better you’ll get. I bought this initially to try pulling a few dents from a stainless steel refrigerator door. It didn’t go well but not because of the puller. I believe the stainless steal on the door was too soft and pliable. The puller popped the dent out but made an outward bump. I tried tapping them in and had a dent again. Before I was done it was better than when I star but not perfect. Next I tried my luck on a couple dents in my daughter’s car. It worked so much better on the car. The metal was not as responsive which actually made it work better. We had a rounded dent that popped right out was virtually invisible after 2 pulls. We had a long door ding style crease dent that we worked on for about an hour and probably pulled 20+ different times. Each pull made a little progress until we felt like we had it as good as we could get it. We buffed our the area with some 3M rubbing compound and we were amazed at how good it looked. We could find the spot but if you looked at the door you’d probably never notice it. All totaled I’ve pulled 4 dents from cars with this and have never been disappointed with the results. This works. People that say it doesn’t are either not being patient enough or aren’t using it as instructed.

Will work ok if it is a small, EXTREMELY shallow dent. Anything else and the piston on the puller is too short to attach. The piston is adjustable but not much before it comes unscrewed. For anything more than a slight ping, this kit won’t work.Very disappointing.